LX6Z-5816146-B Radiator Support Active Grille Shutter for FORD Escape 2020
Primary OE reference: LX6Z-5816146-B
Cross-reference number 1: LX6Z-5816146-B
Cross-reference number 2: LX6Z5816146B
Cross-reference number 3: LX6B-A16E146-AD
Cross-reference number 4: LX6BA16E146AD
Product type: Radiator Support Active Grille Shutter
Vehicle application: FORD Escape 2020
Installation position: Front radiator air inlet
Brand: FORD
Model: Escape
Model year: 2020
Operating role: Controls the model-specific shutter geometry without changing the cooling module so the front air path is not left permanently open.
Fitment confirmation: Use the VIN when model-year boundaries overlap a facelift or powertrain change.
Supply scope: Confirm motor, connector and fastener inclusion before ordering because configurations can vary by application.
Ordering information: Include VIN or production-date details when several shutter versions share a similar frame.
Internal item code: FD02013-009
LX6Z-5816146-B Radiator Support Active Grille Shutter Product Overview
LX6Z-5816146-B is listed as a radiator support active grille shutter for FORD Escape 2020. It manages the opening path ahead of the radiator according to the vehicle’s control strategy. Guides the movable louver frame without changing the cooling module so the vanes can move without contacting nearby trim.
Active Airflow Function
Manages the airflow window ahead of the radiator at the recorded front-end position to support an orderly exterior repair. Coordinates the movable louver frame around the specified engine application to return the airflow-management system to its designed layout. Regulates the radiator inlet path for the listed model and production year so the front air path is not left permanently open. The recorded installation point for FD02013-009 is the front radiator air inlet.
OE and Vehicle Fitment
Inspect the complete OE label using the retained original sample so the electrical interface remains compatible. Cross-check the rear support ribs using the retained original sample so the frame sits without distortion. Photograph the mounting-hole spacing against the removed shutter so the electrical interface remains compatible. Treat LX6Z-5816146-B as the primary purchasing identity and use the production date when applications overlap.
Installation and Handling
Support the vehicle-side connector with the battery procedure observed to reduce the risk of cracked tabs. Protect the transferred fasteners while the radiator area is accessible to reduce the risk of cracked tabs. Align the shutter frame before the front fascia is closed to prevent connector or wiring damage. After mounting, follow the vehicle’s service procedure for connector and shutter-operation checks.
Product Technical Specifications
| Product type | Radiator Support Active Grille Shutter |
|---|---|
| Primary OE reference | LX6Z-5816146-B |
| Cross-reference numbers | LX6Z-5816146-B LX6Z5816146B LX6B-A16E146-AD LX6BA16E146AD |
| Internal item code | FD02013-009 |
| Vehicle brand | FORD |
| Vehicle model | Escape |
| Model year | 2020 |
| Installation position | Front radiator air inlet |
| System role | Vehicle-specific active airflow component ahead of the radiator |
| Electrical content | Confirm actuator, connector and wiring scope from the product photographs |
Quality Inspection and Protective Packing
Confirm the actuator housing under neutral receiving light to protect the repair schedule. Check the carton-supported corners after unpacking but before installation before the unit enters workshop stock. Inspect the outer frame at warehouse receiving so jammed or cracked vanes are isolated. Any assembly with warped frames, damaged pivots or connector defects should be isolated before fitting.
Wholesale Supply Information
Separate the engine specification together with consignee details so similar shutter assemblies remain separated. Confirm the required quantity on the wholesale enquiry to support accurate packing. State the full OE reference before sample approval so the supplied electrical content is clear. Quote requests for FD02013-009 should include the destination and purchase quantity.
Frequently Asked Questions
Is a sample order available for LX6Z-5816146-B?
Sample and wholesale options can be reviewed after the OE number, engine, quantity, supplied scope and delivery destination are confirmed.
How should LX6Z-5816146-B fitment be confirmed?
Confirm whether the required item is a complete shutter, support-integrated unit or actuator. The OE number and application details should agree before installation is scheduled.
What should be inspected when LX6Z-5816146-B arrives?
Inspect the actuator housing under neutral receiving light to identify transit distortion. Check that every vane and pivot moves without visible binding before the unit enters workshop stock.
What information is needed to quote LX6Z-5816146-B?
Send the OE reference, engine, quantity and destination for an accurate export quotation. Original-part and connector photographs can help when more than one application exists.
What is the operating role of LX6Z-5816146-B?
Channels the movable louver frame inside the OE-style mounting envelope so the vanes can move without contacting nearby trim. The vehicle control system determines when the shutter opens or closes.
