71121-TA0-A11 Front Grille for HONDA Accord 2011
Primary OE reference: 71121-TA0-A11
Cross-reference number 1: 71121-TA0-A11
Cross-reference number 2: 71121TA0A11
Product type: Front Grille
Vehicle application: HONDA Accord 2011
Installation position: Front grille / radiator opening
Brand: HONDA
Model: Accord
Model year: 2011
Product function: Front Grille matches a particular upper, lower or centre grille position and protects the radiator zone from larger road debris while allowing airflow.
Fitment check: Use vehicle documents, OE number and physical measurements as one fitment set.
Supply scope: Review the product images for the exact supplied scope and ask about removable trim or emblem pieces before ordering.
Finish note: Compare the visible face with adjacent vehicle trim to avoid a mismatched finish.
Internal item code: HD02011-004
Quotation information: Send the OE number, model/year, quantity and destination for a product-specific quotation.
71121-TA0-A11 Front Grille Product Overview
71121-TA0-A11 is listed as a front grille for HONDA Accord 2011. This product page records the OE reference, vehicle application, supplied scope and practical fitment information needed for replacement-part sourcing.
Application and Product Function
On HONDA Accord 2011, this front grille is intended to re-establish the mesh opening ahead of the radiator, align the trim transition for the recorded trim, and organise the front-end proportions after grille damage. Its application-shaped frame can also maintain the lamp-side contour after grille damage, complete the cooling-module entrance at the stated position, and align the bumper opening during exterior restoration.
Fitment Confirmation
Treat 71121-TA0-A11 as the primary identity for this part. For HONDA Accord 2011, verify suitability by checking the source vehicle and then measure the badge mounting before sample sign-off, inspect the market trim with the retained hardware, and measure the camera opening for the destination market. A physical comparison should additionally verify the OE marking for the destination market, match the production date with the retained hardware, and compare the grille position during a dry comparison.
Installation and Handling
Before removing the original grille, support the camera mount before trim transfer and protect the radiator fins through balanced pressure. During trial fitting of HD02011-004, protect the air guides under even lighting and clean the reusable hardware before final fastening. Before the bumper is fully reassembled, trial-fit the screw points under even lighting and protect the outer corners before the road test.
Product Technical Specifications
| Product type | Front Grille |
|---|---|
| Primary OE reference | 71121-TA0-A11 |
| Cross-reference numbers | 71121-TA0-A11 71121TA0A11 |
| Internal item code | HD02011-004 |
| Vehicle brand | HONDA |
| Vehicle model | Accord |
| Model year | 2011 |
| Installation position | Front grille / radiator opening |
| Primary function | Application-specific exterior grille and front air-entry component |
Quality Inspection and Protective Packing
Receiving inspection for 71121-TA0-A11 should include inspect the projecting tabs under neutral lighting, measure the outer frame with the carton open, and inspect the item label before installation. Before the part is fitted or repacked, the handler should also confirm the side returns under neutral lighting, verify the clip seats at receiving inspection, and review the protective film before sample approval.
Wholesale Supply Information
To quote HD02011-004 accurately, the enquiry should confirm the delivery address for repeat purchasing, separate the trim requirement to the sales team, and provide the internal item code for export planning. For samples, mixed-model cartons or repeat purchasing, please identify the vehicle details before carton approval, specify the complete OE number before carton approval, and provide the carton marking on the enquiry.
Frequently Asked Questions
What should be inspected when 71121-TA0-A11 arrives?
Check the label, outer frame, mesh, tabs, corners, visible finish and carton condition before discarding packaging or starting installation.
What information is needed to quote 71121-TA0-A11?
Send the full OE number, model/year, trim or finish requirement, quantity, original-part photos if available and delivery destination.
Can 71121-TA0-A11 fit every Accord model year?
No. Facelift, market and trim changes can alter grille shape, finish and mounting points. Use the listed year range and OE reference.
Is a sample order available for 71121-TA0-A11?
Sample and wholesale options can be discussed after the OE number, vehicle application, supplied scope, quantity and destination are confirmed.
Does 71121-TA0-A11 include an emblem or decorative trim?
The supply scope follows the product photographs. Badges, mouldings and separate decorative pieces are included only when pictured or specifically confirmed.
