7P6807937 Front Left Headlight Washer Nozzle Cover for VOLKSWAGEN Touareg 2011
Primary OE reference: 7P6807937
Cross-reference number 1: 7P6 807 937
Cross-reference number 2: 7P6807937
Product type: Front Left Headlight Washer Nozzle Cover
Vehicle application: VOLKSWAGEN Touareg 2011
Installation position: Front bumper / headlight washer area
Side: Left
Brand: VOLKSWAGEN
Model: Touareg
Model year: 2011
Product function: Closes the bumper washer opening and restores the visible exterior contour around the headlamp.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.
Internal item code: VM02010-015
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
7P6807937 Front Left Headlight Washer Nozzle Cover Product Overview
The component shown under 7P6807937 is a front left headlight washer nozzle cover intended for VOLKSWAGEN Touareg 2011. The visible cover closes the bumper opening around the washer unit and follows the surrounding bumper contour when the nozzle is retracted. Confirm the left orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for Touareg
Compatibility for 7P6807937 should be confirmed against VOLKSWAGEN Touareg 2011 and the left installation side. The review should use the full OE number, not a partial family reference, separate mirrored left and right items during inventory selection, and compare the complete OE marking with the removed washer component. Use the removed part and product photographs to confirm that the vehicle is equipped with a factory headlight washer system, match the exact model year and bumper revision, and verify the required left or right installation side; finally, check whether the bumper is standard or sport specification and review facelift and pre-facelift washer layouts.
Headlight Washer Nozzle Cover Function and Design Notes
The visible and hidden interfaces of VM02010-015 should be checked separately. For this headlight washer nozzle cover, review the hose spigot angle on the washer nozzle, check the nozzle outlet orientation, and inspect narrow plastic tips before installation. A direct comparison with the removed part should additionally compare the distance between mounting points, review the engagement of the cover with the nozzle stem, and check the joint between the visible cap and hidden support. Before the item is accepted, inspect the molded tabs for cracks or distortion and compare the outer surface profile with the bumper opening.
OE Identification and Side Confirmation
7P6807937 is the primary OE identity for this left front left headlight washer nozzle cover, while VM02010-015 is the internal item code. Match both references to the vehicle record, then verify the required left or right installation side. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for VM02010-015 begins before the bumper area is disturbed: verify that the cap remains attached through a full washer cycle and reconnect every hose clip before filling the system. During trial fitting, complete a final visual check under even lighting, confirm that the nozzle extends and retracts freely, and follow the vehicle workshop procedure for bumper removal. Before returning the vehicle to service, verify that the cover closes without rubbing the bumper, work with the washer system depressurized, and test the spray direction before returning the vehicle.
Receiving Inspection
When VM02010-015 arrives, receiving staff should match the item label to the purchase order and OE reference, check the cap hinge or retaining point for free movement, and review the hose spigot for impact damage or distortion. Before workshop release, confirm that small seals or clips have not remained in the wrapping, inspect the rear locator shape without forcing any movable section, confirm the internal item code before mixed stock is shelved, and verify the supplied scope before discarding dividers or inner bags. Complete the inspection by ensuring that staff inspect the fluid passage only with clean, non-damaging tools, photograph the received item if the vehicle fitment is still pending, and inspect the visible cover face for scratches or pressure marks.
Product Technical Specifications
| Product type | Front Left Headlight Washer Nozzle Cover |
|---|---|
| Primary OE reference | 7P6807937 |
| Cross-reference numbers | 7P6 807 937 7P6807937 |
| Internal item code | VM02010-015 |
| Vehicle brand | VOLKSWAGEN |
| Vehicle model | Touareg |
| Model year | 2011 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Left |
| Applicable vehicle | VOLKSWAGEN Touareg 2011 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 7P6807937, please separate fragile actuator bodies from heavier metal parts, include the full OE reference on the purchase order, and request barcode or private-label details when needed. Packing instructions should verify the packed quantity by OE reference, plug open fluid connections during packing, and request moisture protection for sea freight. Before dispatch, state the required order quantity and state the target vehicle application.
Frequently Asked Questions
How should 7P6807937 be checked before installation?
Compare the OE number, side, mounting points, bumper contour, hose connection and supplied scope with the removed washer component before fitting. For item VM02010-015, the approval should verify the required left or right installation side. The same item record should also compare product photographs with the removed part from several angles.
Why must left and right versions of 7P6807937 be distinguished?
Headlight washer components are normally side-specific. Their bumper contours, hose angles, tabs and nozzle directions should not be assumed interchangeable. On the listed VOLKSWAGEN Touareg 2011, technicians should inspect the hose connector for ovality. A workshop comparison should additionally inspect the washer outlet for blockage.
Is a sample order available for 7P6807937?
Sample and wholesale arrangements can be discussed after the OE reference, application, side, quantity and shipping destination are provided. For the left-side order line, provide the complete destination address or port. The order review should further use dividers to prevent caps from rubbing each other.
Is 7P6807937 a complete headlight washer system?
No. This listing covers the pictured headlight washer nozzle cover. The pump, reservoir, hoses, opposite-side parts and headlamp assembly are not included unless shown in the photographs. The product-specific check for 7P6807937 should identify project stock and service stock separately. Receiving staff should also request moisture protection for sea freight.
Can product photographs alone confirm 7P6807937 compatibility?
Photographs are useful for visual comparison, but the full OE number, vehicle year, bumper version, side and washer equipment must also match. Before this headlight washer nozzle cover is accepted, inspect the bumper cutout shape and surrounding contour. Before approval, the buyer or technician should confirm the destination-market equipment specification.
