7NO807937 Front Left Headlight Washer Nozzle Cover for VOLKSWAGEN Sharan 2013
Primary OE reference: 7NO807937
Cross-reference number 1: 7NO 807 937
Cross-reference number 2: 7NO807937
Product type: Front Left Headlight Washer Nozzle Cover
Vehicle application: VOLKSWAGEN Sharan 2013
Installation position: Front bumper / headlight washer area
Side: Left
Brand: VOLKSWAGEN
Model: Sharan
Model year: 2013
Product function: Closes the bumper washer opening and restores the visible exterior contour around the headlamp.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.
Internal item code: VM02010-001
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
7NO807937 Front Left Headlight Washer Nozzle Cover Product Overview
The component shown under 7NO807937 is a front left headlight washer nozzle cover intended for VOLKSWAGEN Sharan 2013. The visible cover closes the bumper opening around the washer unit and follows the surrounding bumper contour when the nozzle is retracted. Confirm the left orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for Sharan
Compatibility for 7NO807937 should be confirmed against VOLKSWAGEN Sharan 2013 and the left installation side. The review should confirm the destination-market equipment specification, review body-style differences within the same model generation, and retain the removed component for a direct physical comparison. Use the removed part and product photographs to use the full OE number, not a partial family reference, inspect the bumper cutout shape and surrounding contour, and match the exact model year and bumper revision; finally, verify nearby parking-sensor or trim interfaces and compare the washer opening beside the correct headlamp.
Headlight Washer Nozzle Cover Function and Design Notes
The visible and hidden interfaces of VM02010-001 should be checked separately. For this headlight washer nozzle cover, compare the depth of the actuator body, inspect the telescopic body for smooth movement, and check the joint between the visible cap and hidden support. A direct comparison with the removed part should additionally review the left-to-right mirrored geometry, compare the cap-to-support engagement method, and inspect the molded tabs for cracks or distortion. Before the item is accepted, check each molded locator against the original component and review the sealing area around the hose connection.
OE Identification and Side Confirmation
7NO807937 is the primary OE identity for this left front left headlight washer nozzle cover, while VM02010-001 is the internal item code. Match both references to the vehicle record, then confirm that the listed model designation matches the vehicle. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for VM02010-001 begins before the bumper area is disturbed: check the headlamp lens receives an even spray and confirm that no hose is pinched behind the bumper. During trial fitting, reconfirm the OE number before discarding the packaging, disconnect the fluid hose without twisting the plastic spigot, and align the cover flush with the bumper surface. Before returning the vehicle to service, check the system for leaks after reconnection, clean the hose and connector before assembly, and verify that the cap remains attached through a full washer cycle.
Receiving Inspection
When VM02010-001 arrives, receiving staff should compare connector depth and hose angle with the retained original part, inspect projecting pins before placing the item on a hard bench, and inspect the visible cover face for scratches or pressure marks. Before workshop release, verify the supplied scope before discarding dividers or inner bags, confirm that small seals or clips have not remained in the wrapping, match the item label to the purchase order and OE reference, and check painted or primed surfaces under neutral lighting. Complete the inspection by ensuring that staff check the actuator body for straightness before trial installation, protect the visible face again after inspection is complete, and record carton damage before the item is moved to workshop stock.
Product Technical Specifications
| Product type | Front Left Headlight Washer Nozzle Cover |
|---|---|
| Primary OE reference | 7NO807937 |
| Cross-reference numbers | 7NO 807 937 7NO807937 |
| Internal item code | VM02010-001 |
| Vehicle brand | VOLKSWAGEN |
| Vehicle model | Sharan |
| Model year | 2013 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Left |
| Applicable vehicle | VOLKSWAGEN Sharan 2013 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 7NO807937, please include the full OE reference on the purchase order, confirm sample requirements before a bulk order, and check carton labels at receiving. Packing instructions should separate fragile actuator bodies from heavier metal parts, confirm the acceptable delivery window, and identify the required installation side. Before dispatch, list model years and bumper versions for mixed orders and retain the product label until fitment is confirmed.
Frequently Asked Questions
Can product photographs alone confirm 7NO807937 compatibility?
Photographs are useful for visual comparison, but the full OE number, vehicle year, bumper version, side and washer equipment must also match. For item VM02010-001, the approval should verify the required left or right installation side. The same item record should also confirm that the vehicle is equipped with a factory headlight washer system.
Are clips, hoses or fasteners supplied with 7NO807937?
The supply scope follows the product photographs. Reusable clips, hoses, seals, screws and separate brackets should be confirmed before the order is finalized. On the listed VOLKSWAGEN Sharan 2013, technicians should use dividers to prevent caps from rubbing each other. A workshop comparison should additionally separate left and right items on the packing list.
How should 7NO807937 be packed for export?
The front left headlight washer nozzle cover should be wrapped separately, with visible faces, hose spigots, nozzle outlets and projecting tabs protected from compression and contamination. For the left-side order line, protect hose spigots and projecting tabs. The order review should further use dividers to prevent caps from rubbing each other.
Is workshop installation recommended for 7NO807937?
Yes. A qualified workshop can access the bumper area on the Sharan, transfer hoses or clips safely and test the washer system for correct operation and leaks. The product-specific check for 7NO807937 should photograph the original routing before disassembly. Receiving staff should also replace distorted clips or damaged seals.
What should be inspected when 7NO807937 arrives?
Check the item label, side, contour, tabs, fluid connection, supplied components and carton condition before fitting or discarding the packaging. Before this headlight washer nozzle cover is accepted, check the cap hinge or retaining point for free movement. Before approval, the buyer or technician should inspect the visible cover face for scratches or pressure marks.
