8XA807754 Front Right Headlight Washer Nozzle Cover for AUDI A1 2017
Primary OE reference: 8XA807754
Cross-reference number 1: 8XA 807 754
Cross-reference number 2: 8XA807754
Product type: Front Right Headlight Washer Nozzle Cover
Vehicle application: AUDI A1 2017
Installation position: Front bumper / headlight washer area
Side: Right
Brand: AUDI
Model: A1
Model year: 2017
Product function: Closes the bumper washer opening and restores the visible exterior contour around the headlamp.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.
Internal item code: AD02010-119
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
8XA807754 Front Right Headlight Washer Nozzle Cover Product Overview
The component shown under 8XA807754 is a front right headlight washer nozzle cover intended for AUDI A1 2017. The visible cover closes the bumper opening around the washer unit and follows the surrounding bumper contour when the nozzle is retracted. Confirm the right orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for A1
Compatibility for 8XA807754 should be confirmed against AUDI A1 2017 and the right installation side. The review should retain the removed component for a direct physical comparison, check whether the bumper is standard or sport specification, and check the washer jet position relative to the headlamp lens. Use the removed part and product photographs to match the connector and fluid inlet position where applicable, compare the actuator orientation behind the bumper cover, and compare the washer opening beside the correct headlamp; finally, separate mirrored left and right items during inventory selection and compare every tab, clip seat and locating shoulder.
Headlight Washer Nozzle Cover Function and Design Notes
The visible and hidden interfaces of AD02010-119 should be checked separately. For this headlight washer nozzle cover, compare the support flange width, inspect the actuator barrel for impact damage, and check the joint between the visible cap and hidden support. A direct comparison with the removed part should additionally review any paint-preparation requirement before fitting, compare the visible bumper-side contour, and inspect the telescopic body for smooth movement. Before the item is accepted, check the nozzle outlet orientation and review the spring-loaded return features where fitted.
OE Identification and Side Confirmation
8XA807754 is the primary OE identity for this right front right headlight washer nozzle cover, while AD02010-119 is the internal item code. Match both references to the vehicle record, then separate mirrored left and right items during inventory selection. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-119 begins before the bumper area is disturbed: align the cover flush with the bumper surface and replace distorted clips or damaged seals. During trial fitting, inspect nearby wiring and sensors before refitting trim, test for drips after the washer pump stops, and reconfirm the OE number before discarding the packaging. Before returning the vehicle to service, route the washer hose away from sharp edges, support the bumper cover while accessing the hidden actuator, and paint or finish visible covers before final installation when required.
Receiving Inspection
When AD02010-119 arrives, receiving staff should review the production finish against the approved sample, inspect the rear locator shape without forcing any movable section, and review the production finish against the approved sample. Before workshop release, inspect the rear locator shape without forcing any movable section, review the production finish against the approved sample, inspect the rear locator shape without forcing any movable section, and review the production finish against the approved sample. Complete the inspection by ensuring that staff inspect the rear locator shape without forcing any movable section, review the production finish against the approved sample, and inspect the rear locator shape without forcing any movable section.
Product Technical Specifications
| Product type | Front Right Headlight Washer Nozzle Cover |
|---|---|
| Primary OE reference | 8XA807754 |
| Cross-reference numbers | 8XA 807 754 8XA807754 |
| Internal item code | AD02010-119 |
| Vehicle brand | AUDI |
| Vehicle model | A1 |
| Model year | 2017 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Right |
| Applicable vehicle | AUDI A1 2017 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 8XA807754, please identify project stock and service stock separately, request a packing-list breakdown by internal item code, and include the full OE reference on the purchase order. Packing instructions should confirm whether caps and nozzles should be supplied as pairs, use dividers to prevent caps from rubbing each other, and send photographs of the removed washer part. Before dispatch, state the target vehicle application and separate fragile actuator bodies from heavier metal parts.
Frequently Asked Questions
What should be inspected when 8XA807754 arrives?
Check the item label, side, contour, tabs, fluid connection, supplied components and carton condition before fitting or discarding the packaging. For item AD02010-119, the approval should compare connector depth and hose angle with the retained original part. The same item record should also compare left and right orientation before removing protective wrapping.
Is a sample order available for 8XA807754?
Sample and wholesale arrangements can be discussed after the OE reference, application, side, quantity and shipping destination are provided. On the listed AUDI A1 2017, technicians should plug open fluid connections during packing. A workshop comparison should additionally confirm pallet requirements for larger quantities.
Is 8XA807754 a complete headlight washer system?
No. This listing covers the pictured headlight washer nozzle cover. The pump, reservoir, hoses, opposite-side parts and headlamp assembly are not included unless shown in the photographs. For the right-side order line, request moisture protection for sea freight. The order review should further use dividers to prevent caps from rubbing each other.
Should the washer system be tested after fitting 8XA807754?
Yes. Check nozzle movement, cap closure, spray direction, hose routing and leakage before the bumper-area repair is completed. The product-specific check for 8XA807754 should inspect nearby wiring and sensors before refitting trim. Receiving staff should also tighten bracket hardware only after alignment.
Which side uses 8XA807754?
This front right headlight washer nozzle cover is catalogued for the right side of the front bumper. Opposite-side washer parts normally use mirrored geometry and a different OE reference. Before this headlight washer nozzle cover is accepted, check the fluid inlet for storage contamination. Before approval, the buyer or technician should check the cap hinge or retaining point.
