8XA807753 Front Left Headlight Washer Nozzle Cover for AUDI A1 2017
Primary OE reference: 8XA807753
Cross-reference number 1: 8XA 807 753
Cross-reference number 2: 8XA807753
Product type: Front Left Headlight Washer Nozzle Cover
Vehicle application: AUDI A1 2017
Installation position: Front bumper / headlight washer area
Side: Left
Brand: AUDI
Model: A1
Model year: 2017
Product function: Closes the bumper washer opening and restores the visible exterior contour around the headlamp.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.
Internal item code: AD02010-118
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
8XA807753 Front Left Headlight Washer Nozzle Cover Product Overview
The component shown under 8XA807753 is a front left headlight washer nozzle cover intended for AUDI A1 2017. The visible cover closes the bumper opening around the washer unit and follows the surrounding bumper contour when the nozzle is retracted. Confirm the left orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for A1
Compatibility for 8XA807753 should be confirmed against AUDI A1 2017 and the left installation side. The review should check whether the bumper is standard or sport specification, check whether the original cover is supplied separately from its support, and confirm whether a cap, nozzle, bracket or complete assembly is required. Use the removed part and product photographs to confirm that the vehicle is equipped with a factory headlight washer system, match the connector and fluid inlet position where applicable, and compare the hose connection or cover hinge with the original part; finally, use the full OE number, not a partial family reference and check regional variations in headlamp-cleaning equipment.
Headlight Washer Nozzle Cover Function and Design Notes
The visible and hidden interfaces of AD02010-118 should be checked separately. For this headlight washer nozzle cover, review the sealing area around the hose connection, check whether the visible part requires painting, and inspect the rear reinforcement ribs. A direct comparison with the removed part should additionally compare the distance between mounting points, review the left-to-right mirrored geometry, and check the bumper-facing surface for transport marks. Before the item is accepted, inspect the washer outlet for blockage and compare the support flange width.
OE Identification and Side Confirmation
8XA807753 is the primary OE identity for this left front left headlight washer nozzle cover, while AD02010-118 is the internal item code. Match both references to the vehicle record, then inspect the bumper cutout shape and surrounding contour. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-118 begins before the bumper area is disturbed: complete a final visual check under even lighting and transfer reusable clips only after checking their condition. During trial fitting, check the system for leaks after reconnection, support the bumper cover while accessing the hidden actuator, and confirm sufficient clearance behind the bumper. Before returning the vehicle to service, reconnect every hose clip before filling the system, photograph the original routing before disassembly, and reconfirm the OE number before discarding the packaging.
Receiving Inspection
When AD02010-118 arrives, receiving staff should separate mirrored components immediately after carton opening, inspect the fluid passage only with clean, non-damaging tools, and record carton damage before the item is moved to workshop stock. Before workshop release, confirm that small seals or clips have not remained in the wrapping, check molded tabs for whitening, cracks or transport stress, confirm the bumper-facing edge has not been compressed in transit, and check the carton partition for evidence of part-to-part contact. Complete the inspection by ensuring that staff check the spring-return area where the component includes an actuator, verify that protective plugs remain in open fluid connections, and protect the visible face again after inspection is complete.
Product Technical Specifications
| Product type | Front Left Headlight Washer Nozzle Cover |
|---|---|
| Primary OE reference | 8XA807753 |
| Cross-reference numbers | 8XA 807 753 8XA807753 |
| Internal item code | AD02010-118 |
| Vehicle brand | AUDI |
| Vehicle model | A1 |
| Model year | 2017 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Left |
| Applicable vehicle | AUDI A1 2017 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 8XA807753, please plug open fluid connections during packing, check carton labels at receiving, and request a packing-list breakdown by internal item code. Packing instructions should provide the complete destination address or port, confirm sample requirements before a bulk order, and confirm the preferred incoterm. Before dispatch, state any outer-carton marking requirements and include the full OE reference on the purchase order.
Frequently Asked Questions
Can product photographs alone confirm 8XA807753 compatibility?
Photographs are useful for visual comparison, but the full OE number, vehicle year, bumper version, side and washer equipment must also match. For item AD02010-118, the approval should compare the actuator orientation behind the bumper cover. The same item record should also confirm the destination-market equipment specification.
Does the finish specification matter for 8XA807753?
Yes. A visible headlight washer nozzle cover may be primed, painted or textured for a specific bumper version. Compare the original surface and colour requirements before installation. On the listed AUDI A1 2017, technicians should inspect the rear reinforcement ribs. A workshop comparison should additionally review the bracket stiffness and screw seats.
Is workshop installation recommended for 8XA807753?
Yes. A qualified workshop can access the bumper area on the A1, transfer hoses or clips safely and test the washer system for correct operation and leaks. For the left-side order line, verify that the cover closes without rubbing the bumper. The order review should further verify that the cover closes without rubbing the bumper.
How should 8XA807753 be packed for export?
The front left headlight washer nozzle cover should be wrapped separately, with visible faces, hose spigots, nozzle outlets and projecting tabs protected from compression and contamination. The product-specific check for 8XA807753 should separate left and right items on the packing list. Receiving staff should also list model years and bumper versions for mixed orders.
Which vehicle application is listed for 8XA807753?
8XA807753 is listed for AUDI A1 2017. Confirm the complete OE reference, model year, bumper specification and installation side against the vehicle. Before this headlight washer nozzle cover is accepted, compare the hose connection or cover hinge with the original part. Before approval, the buyer or technician should inspect the bumper cutout shape and surrounding contour.
