4M0807753D-1 Front Left Headlight Washer Nozzle Cover for AUDI Q7 2020
Primary OE reference: 4M0807753D-1
Cross-reference number 1: 4M0 807 753D-1
Cross-reference number 2: 4M0807753D-1
Cross-reference number 3: 4M0807753D1
Product type: Front Left Headlight Washer Nozzle Cover
Vehicle application: AUDI Q7 2020
Installation position: Front bumper / headlight washer area
Side: Left
Brand: AUDI
Model: Q7
Model year: 2020
Product function: Closes the bumper washer opening and restores the visible exterior contour around the headlamp.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.
Internal item code: AD02010-100
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
4M0807753D-1 Front Left Headlight Washer Nozzle Cover Product Overview
The component shown under 4M0807753D-1 is a front left headlight washer nozzle cover intended for AUDI Q7 2020. The visible cover closes the bumper opening around the washer unit and follows the surrounding bumper contour when the nozzle is retracted. Confirm the left orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for Q7
Compatibility for 4M0807753D-1 should be confirmed against AUDI Q7 2020 and the left installation side. The review should confirm that the listed model designation matches the vehicle, verify that the OE reference is not for the opposite side, and confirm the destination-market equipment specification. Use the removed part and product photographs to compare the complete OE marking with the removed washer component, check whether the original cover is supplied separately from its support, and review painted, primed and unpainted finish requirements; finally, compare the hose connection or cover hinge with the original part and match the exact model year and bumper revision.
Headlight Washer Nozzle Cover Function and Design Notes
The visible and hidden interfaces of AD02010-100 should be checked separately. For this headlight washer nozzle cover, compare the cap-to-support engagement method, inspect narrow plastic tips before installation, and check whether the visible part requires painting. A direct comparison with the removed part should additionally review the left-to-right mirrored geometry, compare the support flange width, and inspect the actuator barrel for impact damage. Before the item is accepted, check the joint between the visible cap and hidden support and review any paint-preparation requirement before fitting.
OE Identification and Side Confirmation
4M0807753D-1 is the primary OE identity for this left front left headlight washer nozzle cover, while AD02010-100 is the internal item code. Match both references to the vehicle record, then verify nearby parking-sensor or trim interfaces. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-100 begins before the bumper area is disturbed: protect the painted bumper surface during removal and check the system for leaks after reconnection. During trial fitting, tighten bracket hardware only after alignment, compare the installed height with the opposite side, and inspect the bumper opening after the trial fit. Before returning the vehicle to service, disconnect the fluid hose without twisting the plastic spigot, test the spray direction before returning the vehicle, and follow the vehicle workshop procedure for bumper removal.
Receiving Inspection
When AD02010-100 arrives, receiving staff should compare the visible surface texture with the ordered specification, review the hose spigot for impact damage or distortion, and compare the visible surface texture with the ordered specification. Before workshop release, review the hose spigot for impact damage or distortion, compare the visible surface texture with the ordered specification, review the hose spigot for impact damage or distortion, and compare the visible surface texture with the ordered specification. Complete the inspection by ensuring that staff review the hose spigot for impact damage or distortion, compare the visible surface texture with the ordered specification, and review the hose spigot for impact damage or distortion.
Product Technical Specifications
| Product type | Front Left Headlight Washer Nozzle Cover |
|---|---|
| Primary OE reference | 4M0807753D-1 |
| Cross-reference numbers | 4M0 807 753D-1 4M0807753D-1 4M0807753D1 |
| Internal item code | AD02010-100 |
| Vehicle brand | AUDI |
| Vehicle model | Q7 |
| Model year | 2020 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Left |
| Applicable vehicle | AUDI Q7 2020 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 4M0807753D-1, please list model years and bumper versions for mixed orders, confirm pallet requirements for larger quantities, and protect each nozzle outlet from dust during transit. Packing instructions should confirm sample requirements before a bulk order, request moisture protection for sea freight, and identify painted and unpainted variants on separate lines. Before dispatch, protect hose spigots and projecting tabs and provide the consignee and freight-forwarder details.
Frequently Asked Questions
Which vehicle application is listed for 4M0807753D-1?
4M0807753D-1 is listed for AUDI Q7 2020. Confirm the complete OE reference, model year, bumper specification and installation side against the vehicle. For item AD02010-100, the approval should compare the actuator orientation behind the bumper cover. The same item record should also compare the actuator orientation behind the bumper cover.
Which side uses 4M0807753D-1?
This front left headlight washer nozzle cover is catalogued for the left side of the front bumper. Opposite-side washer parts normally use mirrored geometry and a different OE reference. On the listed AUDI Q7 2020, technicians should review the left-to-right mirrored geometry. A workshop comparison should additionally review the left-to-right mirrored geometry.
How should 4M0807753D-1 be checked before installation?
Compare the OE number, side, mounting points, bumper contour, hose connection and supplied scope with the removed washer component before fitting. For the left-side order line, confirm that the vehicle is equipped with a factory headlight washer system. The order review should further confirm that the vehicle is equipped with a factory headlight washer system.
Is workshop installation recommended for 4M0807753D-1?
Yes. A qualified workshop can access the bumper area on the Q7, transfer hoses or clips safely and test the washer system for correct operation and leaks. The product-specific check for 4M0807753D-1 should clean the hose and connector before assembly. Receiving staff should also inspect the bumper opening after the trial fit.
Does the finish specification matter for 4M0807753D-1?
Yes. A visible headlight washer nozzle cover may be primed, painted or textured for a specific bumper version. Compare the original surface and colour requirements before installation. Before this headlight washer nozzle cover is accepted, check whether the visible part requires painting. Before approval, the buyer or technician should check the cap hinge or retaining point.
