8R0955275 Front Left Headlight Washer Nozzle Cover for AUDI Q5 2010
Primary OE reference: 8R0955275
Cross-reference number 1: 8R0 955 275
Cross-reference number 2: 8R0955275
Product type: Front Left Headlight Washer Nozzle Cover
Vehicle application: AUDI Q5 2010
Installation position: Front bumper / headlight washer area
Side: Left
Brand: AUDI
Model: Q5
Model year: 2010
Product function: Closes the bumper washer opening and restores the visible exterior contour around the headlamp.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.
Internal item code: AD02010-096
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
8R0955275 Front Left Headlight Washer Nozzle Cover Product Overview
The component shown under 8R0955275 is a front left headlight washer nozzle cover intended for AUDI Q5 2010. The visible cover closes the bumper opening around the washer unit and follows the surrounding bumper contour when the nozzle is retracted. Confirm the left orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for Q5
Compatibility for 8R0955275 should be confirmed against AUDI Q5 2010 and the left installation side. The review should check whether the original cover is supplied separately from its support, check whether the bumper is standard or sport specification, and inspect the bumper cutout shape and surrounding contour. Use the removed part and product photographs to confirm the front bumper option before ordering, confirm the destination-market equipment specification, and compare the nozzle travel direction with the vehicle-side installation; finally, separate mirrored left and right items during inventory selection and check the production date where model-year transitions overlap.
Headlight Washer Nozzle Cover Function and Design Notes
The visible and hidden interfaces of AD02010-096 should be checked separately. For this headlight washer nozzle cover, compare the depth of the actuator body, review any paint-preparation requirement before fitting, and check whether the visible part requires painting. A direct comparison with the removed part should additionally inspect the molded tabs for cracks or distortion, compare the distance between mounting points, and review the hose spigot angle on the washer nozzle. Before the item is accepted, check the bumper-facing surface for transport marks and inspect the telescopic body for smooth movement.
OE Identification and Side Confirmation
8R0955275 is the primary OE identity for this left front left headlight washer nozzle cover, while AD02010-096 is the internal item code. Match both references to the vehicle record, then check whether the original cover is supplied separately from its support. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-096 begins before the bumper area is disturbed: confirm that the nozzle extends and retracts freely and confirm that no hose is pinched behind the bumper. During trial fitting, inspect nearby wiring and sensors before refitting trim, check the system for leaks after reconnection, and retain the original fasteners unless replacements are specified. Before returning the vehicle to service, paint or finish visible covers before final installation when required, test the spray direction before returning the vehicle, and complete a final visual check under even lighting.
Receiving Inspection
When AD02010-096 arrives, receiving staff should confirm the internal item code before mixed stock is shelved, match the item label to the purchase order and OE reference, and check the spring-return area where the component includes an actuator. Before workshop release, inspect mounting holes for flash, blockage or edge damage, compare the visible surface texture with the ordered specification, check the carton partition for evidence of part-to-part contact, and inspect the visible cover face for scratches or pressure marks. Complete the inspection by ensuring that staff inspect the rear locator shape without forcing any movable section, confirm the bumper-facing edge has not been compressed in transit, and check the actuator body for straightness before trial installation.
Product Technical Specifications
| Product type | Front Left Headlight Washer Nozzle Cover |
|---|---|
| Primary OE reference | 8R0955275 |
| Cross-reference numbers | 8R0 955 275 8R0955275 |
| Internal item code | AD02010-096 |
| Vehicle brand | AUDI |
| Vehicle model | Q5 |
| Model year | 2010 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Left |
| Applicable vehicle | AUDI Q5 2010 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 8R0955275, please check carton labels at receiving, provide the consignee and freight-forwarder details, and state the requested delivery schedule. Packing instructions should request a packing-list breakdown by internal item code, verify the packed quantity by OE reference, and identify painted and unpainted variants on separate lines. Before dispatch, provide the complete destination address or port and identify the required installation side.
Frequently Asked Questions
Should the washer system be tested after fitting 8R0955275?
Yes. Check nozzle movement, cap closure, spray direction, hose routing and leakage before the bumper-area repair is completed. For item AD02010-096, the approval should inspect nearby wiring and sensors before refitting trim. The same item record should also confirm that the nozzle extends and retracts freely.
Can 8R0955275 fit every Q5 model year?
No. Styling changes and market equipment can alter washer locations and mounting geometry. Use the listed year and full OE number as the starting point for confirmation. On the listed AUDI Q5 2010, technicians should compare product photographs with the removed part from several angles. A workshop comparison should additionally confirm that the vehicle is equipped with a factory headlight washer system.
Which vehicle application is listed for 8R0955275?
8R0955275 is listed for AUDI Q5 2010. Confirm the complete OE reference, model year, bumper specification and installation side against the vehicle. For the left-side order line, compare product photographs with the removed part from several angles. The order review should further compare product photographs with the removed part from several angles.
How should 8R0955275 be checked before installation?
Compare the OE number, side, mounting points, bumper contour, hose connection and supplied scope with the removed washer component before fitting. The product-specific check for 8R0955275 should use the full OE number, not a partial family reference. Receiving staff should also use the full OE number, not a partial family reference.
Does the finish specification matter for 8R0955275?
Yes. A visible headlight washer nozzle cover may be primed, painted or textured for a specific bumper version. Compare the original surface and colour requirements before installation. Before this headlight washer nozzle cover is accepted, check the complete supplied scope against the photographs. Before approval, the buyer or technician should check the cap hinge or retaining point.
