8R0955102A Front Right Headlight Washer Nozzle for AUDI Q5 2013
Primary OE reference: 8R0955102A
Cross-reference number 1: 8R0 955 102A
Cross-reference number 2: 8R0955102A
Product type: Front Right Headlight Washer Nozzle
Vehicle application: AUDI Q5 2013
Installation position: Front bumper / headlight washer area
Side: Right
Brand: AUDI
Model: Q5
Model year: 2013
Product function: Directs washer fluid toward the headlamp lens as part of the vehicle headlight-cleaning system.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
System check: After installation, check hose routing, nozzle movement, spray direction and fluid leakage.
Internal item code: AD02010-093
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
8R0955102A Front Right Headlight Washer Nozzle Product Overview
The component shown under 8R0955102A is a front right headlight washer nozzle intended for AUDI Q5 2013. The washer nozzle receives pressurized fluid, moves toward the headlamp where applicable and directs spray across the lens surface. Confirm the right orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for Q5
Compatibility for 8R0955102A should be confirmed against AUDI Q5 2013 and the right installation side. The review should match the exact model year and bumper revision, confirm the destination-market equipment specification, and confirm whether a cap, nozzle, bracket or complete assembly is required. Use the removed part and product photographs to check regional variations in headlamp-cleaning equipment, compare every tab, clip seat and locating shoulder, and check the washer jet position relative to the headlamp lens; finally, match the exact model year and bumper revision and confirm the destination-market equipment specification.
Headlight Washer Nozzle Function and Design Notes
The visible and hidden interfaces of AD02010-093 should be checked separately. For this headlight washer nozzle, inspect the actuator barrel for impact damage, compare the visible bumper-side contour, and review the spring-loaded return features where fitted. A direct comparison with the removed part should additionally check the bumper-facing surface for transport marks, inspect the hose connector for ovality, and compare the outer surface profile with the bumper opening. Before the item is accepted, review the sealing area around the hose connection and check each molded locator against the original component.
OE Identification and Side Confirmation
8R0955102A is the primary OE identity for this right front right headlight washer nozzle, while AD02010-093 is the internal item code. Match both references to the vehicle record, then retain the removed component for a direct physical comparison. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-093 begins before the bumper area is disturbed: paint or finish visible covers before final installation when required and reconfirm the OE number before discarding the packaging. During trial fitting, replace distorted clips or damaged seals, verify that the cover closes without rubbing the bumper, and trial-fit the component before final fastening. Before returning the vehicle to service, keep dirt out of open washer-fluid lines, confirm that no hose is pinched behind the bumper, and test the spray direction before returning the vehicle.
Receiving Inspection
When AD02010-093 arrives, receiving staff should verify the cover contour against the approved product photograph, check the spring-return area where the component includes an actuator, and inspect the rear locator shape without forcing any movable section. Before workshop release, confirm that loose accessories are identified on the packing list, record carton damage before the item is moved to workshop stock, check painted or primed surfaces under neutral lighting, and verify the supplied scope before discarding dividers or inner bags. Complete the inspection by ensuring that staff compare connector depth and hose angle with the retained original part, inspect mounting holes for flash, blockage or edge damage, and confirm the bumper-facing edge has not been compressed in transit.
Product Technical Specifications
| Product type | Front Right Headlight Washer Nozzle |
|---|---|
| Primary OE reference | 8R0955102A |
| Cross-reference numbers | 8R0 955 102A 8R0955102A |
| Internal item code | AD02010-093 |
| Vehicle brand | AUDI |
| Vehicle model | Q5 |
| Model year | 2013 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Right |
| Applicable vehicle | AUDI Q5 2013 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 8R0955102A, please request replacement-part documentation when required, identify project stock and service stock separately, and state the required order quantity. Packing instructions should confirm the preferred incoterm, identify the required installation side, and state the requested delivery schedule. Before dispatch, plug open fluid connections during packing and confirm sample approval before mass shipment.
Frequently Asked Questions
Is workshop installation recommended for 8R0955102A?
Yes. A qualified workshop can access the bumper area on the Q5, transfer hoses or clips safely and test the washer system for correct operation and leaks. For item AD02010-093, the approval should support the bumper cover while accessing the hidden actuator. The same item record should also protect the painted bumper surface during removal.
Can 8R0955102A fit every Q5 model year?
No. Styling changes and market equipment can alter washer locations and mounting geometry. Use the listed year and full OE number as the starting point for confirmation. On the listed AUDI Q5 2013, technicians should confirm the destination-market equipment specification. A workshop comparison should additionally verify nearby parking-sensor or trim interfaces.
Is 8R0955102A a complete headlight washer system?
No. This listing covers the pictured headlight washer nozzle. The pump, reservoir, hoses, opposite-side parts and headlamp assembly are not included unless shown in the photographs. For the right-side order line, protect hose spigots and projecting tabs. The order review should further use dividers to prevent caps from rubbing each other.
What should be inspected when 8R0955102A arrives?
Check the item label, side, contour, tabs, fluid connection, supplied components and carton condition before fitting or discarding the packaging. The product-specific check for 8R0955102A should review the production finish against the approved sample. Receiving staff should also compare the visible surface texture with the ordered specification.
What information should accompany a 8R0955102A enquiry?
Send the complete OE number, vehicle model and year, installation side, original-part photographs, quantity and delivery destination. Before this headlight washer nozzle is accepted, protect hose spigots and projecting tabs. Before approval, the buyer or technician should protect each nozzle outlet from dust during transit.
