80A955101 Front Left Headlight Washer Nozzle for AUDI Q5 2018
Primary OE reference: 80A955101
Cross-reference number 1: 80A 955 101
Cross-reference number 2: 80A955101
Product type: Front Left Headlight Washer Nozzle
Vehicle application: AUDI Q5 2018
Installation position: Front bumper / headlight washer area
Side: Left
Brand: AUDI
Model: Q5
Model year: 2018
Product function: Directs washer fluid toward the headlamp lens as part of the vehicle headlight-cleaning system.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
System check: After installation, check hose routing, nozzle movement, spray direction and fluid leakage.
Internal item code: AD02010-088
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
80A955101 Front Left Headlight Washer Nozzle Product Overview
The component shown under 80A955101 is a front left headlight washer nozzle intended for AUDI Q5 2018. The washer nozzle receives pressurized fluid, moves toward the headlamp where applicable and directs spray across the lens surface. Confirm the left orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for Q5
Compatibility for 80A955101 should be confirmed against AUDI Q5 2018 and the left installation side. The review should check the washer jet position relative to the headlamp lens, verify that the OE reference is not for the opposite side, and confirm that the vehicle is equipped with a factory headlight washer system. Use the removed part and product photographs to compare the nozzle travel direction with the vehicle-side installation, review facelift and pre-facelift washer layouts, and compare every tab, clip seat and locating shoulder; finally, compare the hose connection or cover hinge with the original part and confirm the front bumper option before ordering.
Headlight Washer Nozzle Function and Design Notes
The visible and hidden interfaces of AD02010-088 should be checked separately. For this headlight washer nozzle, compare the support flange width, inspect narrow plastic tips before installation, and check the cap hinge or retaining point. A direct comparison with the removed part should additionally review the bracket stiffness and screw seats, compare the distance between mounting points, and inspect the base bracket around every locating slot. Before the item is accepted, check the complete supplied scope against the photographs and review the engagement of the cover with the nozzle stem.
OE Identification and Side Confirmation
80A955101 is the primary OE identity for this left front left headlight washer nozzle, while AD02010-088 is the internal item code. Match both references to the vehicle record, then confirm that the vehicle is equipped with a factory headlight washer system. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-088 begins before the bumper area is disturbed: inspect nearby wiring and sensors before refitting trim and compare the installed height with the opposite side. During trial fitting, verify that the cover closes without rubbing the bumper, photograph the original routing before disassembly, and retain the original fasteners unless replacements are specified. Before returning the vehicle to service, work with the washer system depressurized, transfer reusable clips only after checking their condition, and route the washer hose away from sharp edges.
Receiving Inspection
When AD02010-088 arrives, receiving staff should compare left and right orientation before removing protective wrapping, photograph the received item if the vehicle fitment is still pending, and confirm the internal item code before mixed stock is shelved. Before workshop release, review the hose spigot for impact damage or distortion, confirm the bumper-facing edge has not been compressed in transit, measure the main mounting span when two bumper versions appear similar, and confirm the nozzle outlet is clean and unobstructed. Complete the inspection by ensuring that staff inspect mounting holes for flash, blockage or edge damage, review the production finish against the approved sample, and check molded tabs for whitening, cracks or transport stress.
Product Technical Specifications
| Product type | Front Left Headlight Washer Nozzle |
|---|---|
| Primary OE reference | 80A955101 |
| Cross-reference numbers | 80A 955 101 80A955101 |
| Internal item code | AD02010-088 |
| Vehicle brand | AUDI |
| Vehicle model | Q5 |
| Model year | 2018 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Left |
| Applicable vehicle | AUDI Q5 2018 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 80A955101, please verify the packed quantity by OE reference, send photographs of the removed washer part, and protect hose spigots and projecting tabs. Packing instructions should request barcode or private-label details when needed, state the requested delivery schedule, and request replacement-part documentation when required. Before dispatch, include the full OE reference on the purchase order and confirm sample requirements before a bulk order.
Frequently Asked Questions
Can product photographs alone confirm 80A955101 compatibility?
Photographs are useful for visual comparison, but the full OE number, vehicle year, bumper version, side and washer equipment must also match. For item AD02010-088, the approval should check whether the original cover is supplied separately from its support. The same item record should also compare product photographs with the removed part from several angles.
Are clips, hoses or fasteners supplied with 80A955101?
The supply scope follows the product photographs. Reusable clips, hoses, seals, screws and separate brackets should be confirmed before the order is finalized. On the listed AUDI Q5 2018, technicians should use dividers to prevent caps from rubbing each other. A workshop comparison should additionally include the full OE reference on the purchase order.
How should 80A955101 be checked before installation?
Compare the OE number, side, mounting points, bumper contour, hose connection and supplied scope with the removed washer component before fitting. For the left-side order line, compare product photographs with the removed part from several angles. The order review should further inspect the bumper cutout shape and surrounding contour.
Why must left and right versions of 80A955101 be distinguished?
Headlight washer components are normally side-specific. Their bumper contours, hose angles, tabs and nozzle directions should not be assumed interchangeable. The product-specific check for 80A955101 should compare the depth of the actuator body. Receiving staff should also check each molded locator against the original component.
How should 80A955101 be packed for export?
The front left headlight washer nozzle should be wrapped separately, with visible faces, hose spigots, nozzle outlets and projecting tabs protected from compression and contamination. Before this headlight washer nozzle is accepted, confirm the acceptable delivery window. Before approval, the buyer or technician should check carton labels at receiving.
