8U0955102A/B/C Front Right Headlight Washer Nozzle for AUDI Q3 2016
Primary OE reference: 8U0955102A/B/C
Cross-reference number 1: 8U0 955 102 A/B/C
Cross-reference number 2: 8U0955102A/B/C
Cross-reference number 3: 8U0955102ABC
Product type: Front Right Headlight Washer Nozzle
Vehicle application: AUDI Q3 2016
Installation position: Front bumper / headlight washer area
Side: Right
Brand: AUDI
Model: Q3
Model year: 2016
Product function: Directs washer fluid toward the headlamp lens as part of the vehicle headlight-cleaning system.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
System check: After installation, check hose routing, nozzle movement, spray direction and fluid leakage.
Internal item code: AD02010-083
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
8U0955102A/B/C Front Right Headlight Washer Nozzle Product Overview
The component shown under 8U0955102A/B/C is a front right headlight washer nozzle intended for AUDI Q3 2016. The washer nozzle receives pressurized fluid, moves toward the headlamp where applicable and directs spray across the lens surface. Confirm the right orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for Q3
Compatibility for 8U0955102A/B/C should be confirmed against AUDI Q3 2016 and the right installation side. The review should compare every tab, clip seat and locating shoulder, check the washer jet position relative to the headlamp lens, and match the exact model year and bumper revision. Use the removed part and product photographs to confirm the destination-market equipment specification, confirm whether a cap, nozzle, bracket or complete assembly is required, and check regional variations in headlamp-cleaning equipment; finally, compare every tab, clip seat and locating shoulder and check the washer jet position relative to the headlamp lens.
Headlight Washer Nozzle Function and Design Notes
The visible and hidden interfaces of AD02010-083 should be checked separately. For this headlight washer nozzle, review the left-to-right mirrored geometry, check the joint between the visible cap and hidden support, and inspect the telescopic body for smooth movement. A direct comparison with the removed part should additionally compare the depth of the actuator body, review the engagement of the cover with the nozzle stem, and check the complete supplied scope against the photographs. Before the item is accepted, inspect the base bracket around every locating slot and compare the distance between mounting points.
OE Identification and Side Confirmation
8U0955102A/B/C is the primary OE identity for this right front right headlight washer nozzle, while AD02010-083 is the internal item code. Match both references to the vehicle record, then confirm that the listed model designation matches the vehicle. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-083 begins before the bumper area is disturbed: confirm sufficient clearance behind the bumper and retain the original fasteners unless replacements are specified. During trial fitting, avoid forcing a mirrored part into the bumper opening, reconnect every hose clip before filling the system, and disconnect the fluid hose without twisting the plastic spigot. Before returning the vehicle to service, tighten bracket hardware only after alignment, photograph the original routing before disassembly, and confirm that the nozzle extends and retracts freely.
Receiving Inspection
When AD02010-083 arrives, receiving staff should review the hose spigot for impact damage or distortion, compare left and right orientation before removing protective wrapping, and verify the cover contour against the approved product photograph. Before workshop release, check the spring-return area where the component includes an actuator, inspect the rear locator shape without forcing any movable section, confirm that loose accessories are identified on the packing list, and record carton damage before the item is moved to workshop stock. Complete the inspection by ensuring that staff check painted or primed surfaces under neutral lighting, verify the supplied scope before discarding dividers or inner bags, and compare connector depth and hose angle with the retained original part.
Product Technical Specifications
| Product type | Front Right Headlight Washer Nozzle |
|---|---|
| Primary OE reference | 8U0955102A/B/C |
| Cross-reference numbers | 8U0 955 102 A/B/C 8U0955102A/B/C 8U0955102ABC |
| Internal item code | AD02010-083 |
| Vehicle brand | AUDI |
| Vehicle model | Q3 |
| Model year | 2016 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Right |
| Applicable vehicle | AUDI Q3 2016 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 8U0955102A/B/C, please state any outer-carton marking requirements, state the target vehicle application, and identify painted and unpainted variants on separate lines. Packing instructions should check carton labels at receiving, send photographs of the removed washer part, and request moisture protection for sea freight. Before dispatch, request protective inner wrapping for painted faces and use dividers to prevent caps from rubbing each other.
Frequently Asked Questions
Can 8U0955102A/B/C fit every Q3 model year?
No. Styling changes and market equipment can alter washer locations and mounting geometry. Use the listed year and full OE number as the starting point for confirmation. For item AD02010-083, the approval should verify the required left or right installation side. The same item record should also confirm that the vehicle is equipped with a factory headlight washer system.
Is workshop installation recommended for 8U0955102A/B/C?
Yes. A qualified workshop can access the bumper area on the Q3, transfer hoses or clips safely and test the washer system for correct operation and leaks. On the listed AUDI Q3 2016, technicians should check the system for leaks after reconnection. A workshop comparison should additionally trial-fit the component before final fastening.
Should the washer system be tested after fitting 8U0955102A/B/C?
Yes. Check nozzle movement, cap closure, spray direction, hose routing and leakage before the bumper-area repair is completed. For the right-side order line, verify that the cover closes without rubbing the bumper. The order review should further verify that the cover closes without rubbing the bumper.
Can product photographs alone confirm 8U0955102A/B/C compatibility?
Photographs are useful for visual comparison, but the full OE number, vehicle year, bumper version, side and washer equipment must also match. The product-specific check for 8U0955102A/B/C should separate mirrored left and right items during inventory selection. Receiving staff should also compare the actuator orientation behind the bumper cover.
Does the finish specification matter for 8U0955102A/B/C?
Yes. A visible headlight washer nozzle may be primed, painted or textured for a specific bumper version. Compare the original surface and colour requirements before installation. Before this headlight washer nozzle is accepted, compare the cap-to-support engagement method. Before approval, the buyer or technician should check the fluid inlet for storage contamination.
