83A955102A Front Right Headlight Washer Nozzle for AUDI Q3 2019

83A955102A Front Right Headlight Washer Nozzle Product Overview

The component shown under 83A955102A is a front right headlight washer nozzle intended for AUDI Q3 2019. The washer nozzle receives pressurized fluid, moves toward the headlamp where applicable and directs spray across the lens surface. Confirm the right orientation, washer-system connection, bumper-side geometry against the original vehicle part.

Fitment and Washer-System Application for Q3

Compatibility for 83A955102A should be confirmed against AUDI Q3 2019 and the right installation side. The review should match the mounting pattern around the bumper aperture, compare the hose connection or cover hinge with the original part, and check the production date where model-year transitions overlap. Use the removed part and product photographs to retain the removed component for a direct physical comparison, confirm whether a cap, nozzle, bracket or complete assembly is required, and compare the actuator orientation behind the bumper cover; finally, verify that the OE reference is not for the opposite side and inspect the bumper cutout shape and surrounding contour.

Headlight Washer Nozzle Function and Design Notes

The visible and hidden interfaces of AD02010-081 should be checked separately. For this headlight washer nozzle, inspect the telescopic body for smooth movement, compare the cap-to-support engagement method, and review the sealing area around the hose connection. A direct comparison with the removed part should additionally check the bumper-facing surface for transport marks, inspect the actuator barrel for impact damage, and compare the retracted position with the bumper surface. Before the item is accepted, review the hose spigot angle on the washer nozzle and check the nozzle outlet orientation.

OE Identification and Side Confirmation

83A955102A is the primary OE identity for this right front right headlight washer nozzle, while AD02010-081 is the internal item code. Match both references to the vehicle record, then check whether the original cover is supplied separately from its support. Do not substitute the mirrored side merely because the visible cover shape appears similar.

Installation and System Testing Guidance

Workshop preparation for AD02010-081 begins before the bumper area is disturbed: trial-fit the component before final fastening and support the bumper cover while accessing the hidden actuator. During trial fitting, compare the installed height with the opposite side, retain the original fasteners unless replacements are specified, and route the washer hose away from sharp edges. Before returning the vehicle to service, tighten bracket hardware only after alignment, use hand pressure rather than levering narrow plastic tabs, and reconfirm the OE number before discarding the packaging.

Receiving Inspection

When AD02010-081 arrives, receiving staff should inspect projecting pins before placing the item on a hard bench, confirm that loose accessories are identified on the packing list, and check the carton partition for evidence of part-to-part contact. Before workshop release, compare connector depth and hose angle with the retained original part, compare the supplied side with the vehicle repair order, retain the OE label until the washer system has passed its function test, and check molded tabs for whitening, cracks or transport stress. Complete the inspection by ensuring that staff compare the visible surface texture with the ordered specification, verify the cover contour against the approved product photograph, and review the production finish against the approved sample.

Product Technical Specifications

Wholesale Supply and Protective Packing

For a quotation or repeat order of 83A955102A, please confirm whether caps and nozzles should be supplied as pairs, confirm sample approval before mass shipment, and request protective inner wrapping for painted faces. Packing instructions should confirm the preferred incoterm, identify painted and unpainted variants on separate lines, and list model years and bumper versions for mixed orders. Before dispatch, separate fragile actuator bodies from heavier metal parts and include the full OE reference on the purchase order.

Frequently Asked Questions

Are clips, hoses or fasteners supplied with 83A955102A?

The supply scope follows the product photographs. Reusable clips, hoses, seals, screws and separate brackets should be confirmed before the order is finalized. For item AD02010-081, the approval should confirm sample approval before mass shipment. The same item record should also protect each nozzle outlet from dust during transit.

What information should accompany a 83A955102A enquiry?

Send the complete OE number, vehicle model and year, installation side, original-part photographs, quantity and delivery destination. On the listed AUDI Q3 2019, technicians should plug open fluid connections during packing. A workshop comparison should additionally state the required order quantity.

Can product photographs alone confirm 83A955102A compatibility?

Photographs are useful for visual comparison, but the full OE number, vehicle year, bumper version, side and washer equipment must also match. For the right-side order line, compare the actuator orientation behind the bumper cover. The order review should further compare the actuator orientation behind the bumper cover.

How should 83A955102A be checked before installation?

Compare the OE number, side, mounting points, bumper contour, hose connection and supplied scope with the removed washer component before fitting. The product-specific check for 83A955102A should inspect the bumper cutout shape and surrounding contour. Receiving staff should also compare the actuator orientation behind the bumper cover.

How should 83A955102A be packed for export?

The front right headlight washer nozzle should be wrapped separately, with visible faces, hose spigots, nozzle outlets and projecting tabs protected from compression and contamination. Before this headlight washer nozzle is accepted, include the full OE reference on the purchase order. Before approval, the buyer or technician should protect each nozzle outlet from dust during transit.