83A955101A Front Left Headlight Washer Nozzle for AUDI Q3 2019
Primary OE reference: 83A955101A
Cross-reference number 1: 83A 955 101A
Cross-reference number 2: 83A955101A
Product type: Front Left Headlight Washer Nozzle
Vehicle application: AUDI Q3 2019
Installation position: Front bumper / headlight washer area
Side: Left
Brand: AUDI
Model: Q3
Model year: 2019
Product function: Directs washer fluid toward the headlamp lens as part of the vehicle headlight-cleaning system.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
System check: After installation, check hose routing, nozzle movement, spray direction and fluid leakage.
Internal item code: AD02010-080
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
83A955101A Front Left Headlight Washer Nozzle Product Overview
The component shown under 83A955101A is a front left headlight washer nozzle intended for AUDI Q3 2019. The washer nozzle receives pressurized fluid, moves toward the headlamp where applicable and directs spray across the lens surface. Confirm the left orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for Q3
Compatibility for 83A955101A should be confirmed against AUDI Q3 2019 and the left installation side. The review should confirm that the vehicle is equipped with a factory headlight washer system, review body-style differences within the same model generation, and check regional variations in headlamp-cleaning equipment. Use the removed part and product photographs to check the production date where model-year transitions overlap, verify the required left or right installation side, and confirm the front bumper option before ordering; finally, verify nearby parking-sensor or trim interfaces and confirm whether a cap, nozzle, bracket or complete assembly is required.
Headlight Washer Nozzle Function and Design Notes
The visible and hidden interfaces of AD02010-080 should be checked separately. For this headlight washer nozzle, compare the retracted position with the bumper surface, inspect the molded tabs for cracks or distortion, and check the cap hinge or retaining point. A direct comparison with the removed part should additionally review the clip geometry on the rear face, compare the cap-to-support engagement method, and inspect narrow plastic tips before installation. Before the item is accepted, check whether the visible part requires painting and review the left-to-right mirrored geometry.
OE Identification and Side Confirmation
83A955101A is the primary OE identity for this left front left headlight washer nozzle, while AD02010-080 is the internal item code. Match both references to the vehicle record, then compare the hose connection or cover hinge with the original part. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-080 begins before the bumper area is disturbed: retain the original fasteners unless replacements are specified and trial-fit the component before final fastening. During trial fitting, clean the hose and connector before assembly, confirm sufficient clearance behind the bumper, and verify that the cover closes without rubbing the bumper. Before returning the vehicle to service, complete a final visual check under even lighting, align the cover flush with the bumper surface, and replace distorted clips or damaged seals.
Receiving Inspection
When AD02010-080 arrives, receiving staff should retain the OE label until the washer system has passed its function test, match the item label to the purchase order and OE reference, and retain the OE label until the washer system has passed its function test. Before workshop release, match the item label to the purchase order and OE reference, retain the OE label until the washer system has passed its function test, match the item label to the purchase order and OE reference, and retain the OE label until the washer system has passed its function test. Complete the inspection by ensuring that staff match the item label to the purchase order and OE reference, retain the OE label until the washer system has passed its function test, and match the item label to the purchase order and OE reference.
Product Technical Specifications
| Product type | Front Left Headlight Washer Nozzle |
|---|---|
| Primary OE reference | 83A955101A |
| Cross-reference numbers | 83A 955 101A 83A955101A |
| Internal item code | AD02010-080 |
| Vehicle brand | AUDI |
| Vehicle model | Q3 |
| Model year | 2019 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Left |
| Applicable vehicle | AUDI Q3 2019 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 83A955101A, please separate left and right items on the packing list, retain the product label until fitment is confirmed, and verify the packed quantity by OE reference. Packing instructions should request protective inner wrapping for painted faces, check carton labels at receiving, and state any outer-carton marking requirements. Before dispatch, confirm whether the visible cover needs a primed or finished surface and request barcode or private-label details when needed.
Frequently Asked Questions
Can 83A955101A fit every Q3 model year?
No. Styling changes and market equipment can alter washer locations and mounting geometry. Use the listed year and full OE number as the starting point for confirmation. For item AD02010-080, the approval should verify the required left or right installation side. The same item record should also compare the actuator orientation behind the bumper cover.
Does the finish specification matter for 83A955101A?
Yes. A visible headlight washer nozzle may be primed, painted or textured for a specific bumper version. Compare the original surface and colour requirements before installation. On the listed AUDI Q3 2019, technicians should review the clip geometry on the rear face. A workshop comparison should additionally inspect the washer outlet for blockage.
How should 83A955101A be checked before installation?
Compare the OE number, side, mounting points, bumper contour, hose connection and supplied scope with the removed washer component before fitting. For the left-side order line, verify nearby parking-sensor or trim interfaces. The order review should further compare the hose connection or cover hinge with the original part.
Can product photographs alone confirm 83A955101A compatibility?
Photographs are useful for visual comparison, but the full OE number, vehicle year, bumper version, side and washer equipment must also match. The product-specific check for 83A955101A should review facelift and pre-facelift washer layouts. Receiving staff should also compare the actuator orientation behind the bumper cover.
What information should accompany a 83A955101A enquiry?
Send the complete OE number, vehicle model and year, installation side, original-part photographs, quantity and delivery destination. Before this headlight washer nozzle is accepted, use dividers to prevent caps from rubbing each other. Before approval, the buyer or technician should confirm the preferred incoterm.
