4H0955270 Front Right Headlight Washer Nozzle Cover for AUDI A8 2011
Primary OE reference: 4H0955270
Cross-reference number 1: 4H0 955 270
Cross-reference number 2: 4H0955270
Product type: Front Right Headlight Washer Nozzle Cover
Vehicle application: AUDI A8 2011
Installation position: Front bumper / headlight washer area
Side: Right
Brand: AUDI
Model: A8
Model year: 2011
Product function: Closes the bumper washer opening and restores the visible exterior contour around the headlamp.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.
Internal item code: AD02010-079
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
4H0955270 Front Right Headlight Washer Nozzle Cover Product Overview
The component shown under 4H0955270 is a front right headlight washer nozzle cover intended for AUDI A8 2011. The visible cover closes the bumper opening around the washer unit and follows the surrounding bumper contour when the nozzle is retracted. Confirm the right orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for A8
Compatibility for 4H0955270 should be confirmed against AUDI A8 2011 and the right installation side. The review should review body-style differences within the same model generation, compare the actuator orientation behind the bumper cover, and match the exact model year and bumper revision. Use the removed part and product photographs to confirm that the listed model designation matches the vehicle, check the production date where model-year transitions overlap, and separate mirrored left and right items during inventory selection; finally, compare the nozzle travel direction with the vehicle-side installation and confirm the destination-market equipment specification.
Headlight Washer Nozzle Cover Function and Design Notes
The visible and hidden interfaces of AD02010-079 should be checked separately. For this headlight washer nozzle cover, review the engagement of the cover with the nozzle stem, check each molded locator against the original component, and inspect the actuator barrel for impact damage. A direct comparison with the removed part should additionally compare the cap perimeter and corner radii, review the bracket stiffness and screw seats, and check the joint between the visible cap and hidden support. Before the item is accepted, inspect the hose connector for ovality and compare the retracted position with the bumper surface.
OE Identification and Side Confirmation
4H0955270 is the primary OE identity for this right front right headlight washer nozzle cover, while AD02010-079 is the internal item code. Match both references to the vehicle record, then compare product photographs with the removed part from several angles. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-079 begins before the bumper area is disturbed: use hand pressure rather than levering narrow plastic tabs and inspect the bumper opening after the trial fit. During trial fitting, work with the washer system depressurized, align the cover flush with the bumper surface, and avoid forcing a mirrored part into the bumper opening. Before returning the vehicle to service, tighten bracket hardware only after alignment, paint or finish visible covers before final installation when required, and verify that the cover closes without rubbing the bumper.
Receiving Inspection
When AD02010-079 arrives, receiving staff should record carton damage before the item is moved to workshop stock, confirm that small seals or clips have not remained in the wrapping, and check molded tabs for whitening, cracks or transport stress. Before workshop release, confirm the bumper-facing edge has not been compressed in transit, check the carton partition for evidence of part-to-part contact, check the spring-return area where the component includes an actuator, and verify that protective plugs remain in open fluid connections. Complete the inspection by ensuring that staff protect the visible face again after inspection is complete, verify the supplied scope before discarding dividers or inner bags, and review the production finish against the approved sample.
Product Technical Specifications
| Product type | Front Right Headlight Washer Nozzle Cover |
|---|---|
| Primary OE reference | 4H0955270 |
| Cross-reference numbers | 4H0 955 270 4H0955270 |
| Internal item code | AD02010-079 |
| Vehicle brand | AUDI |
| Vehicle model | A8 |
| Model year | 2011 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Right |
| Applicable vehicle | AUDI A8 2011 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 4H0955270, please state the required order quantity, protect hose spigots and projecting tabs, and retain the product label until fitment is confirmed. Packing instructions should confirm sample approval before mass shipment, send photographs of the removed washer part, and list model years and bumper versions for mixed orders. Before dispatch, provide the consignee and freight-forwarder details and verify the packed quantity by OE reference.
Frequently Asked Questions
How should 4H0955270 be checked before installation?
Compare the OE number, side, mounting points, bumper contour, hose connection and supplied scope with the removed washer component before fitting. For item AD02010-079, the approval should verify the required left or right installation side. The same item record should also compare product photographs with the removed part from several angles.
What should be inspected when 4H0955270 arrives?
Check the item label, side, contour, tabs, fluid connection, supplied components and carton condition before fitting or discarding the packaging. On the listed AUDI A8 2011, technicians should inspect the rear locator shape without forcing any movable section. A workshop comparison should additionally verify the nozzle head returns smoothly without applying excess force.
Which side uses 4H0955270?
This front right headlight washer nozzle cover is catalogued for the right side of the front bumper. Opposite-side washer parts normally use mirrored geometry and a different OE reference. For the right-side order line, check the cap hinge or retaining point. The order review should further check the bumper-facing surface for transport marks.
Can product photographs alone confirm 4H0955270 compatibility?
Photographs are useful for visual comparison, but the full OE number, vehicle year, bumper version, side and washer equipment must also match. The product-specific check for 4H0955270 should check regional variations in headlamp-cleaning equipment. Receiving staff should also compare the actuator orientation behind the bumper cover.
What information should accompany a 4H0955270 enquiry?
Send the complete OE number, vehicle model and year, installation side, original-part photographs, quantity and delivery destination. Before this headlight washer nozzle cover is accepted, request moisture protection for sea freight. Before approval, the buyer or technician should confirm the acceptable delivery window.
