4H0955269 Front Left Headlight Washer Nozzle Cover for AUDI A8 2011
Primary OE reference: 4H0955269
Cross-reference number 1: 4H0 955 269
Cross-reference number 2: 4H0955269
Product type: Front Left Headlight Washer Nozzle Cover
Vehicle application: AUDI A8 2011
Installation position: Front bumper / headlight washer area
Side: Left
Brand: AUDI
Model: A8
Model year: 2011
Product function: Closes the bumper washer opening and restores the visible exterior contour around the headlamp.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.
Internal item code: AD02010-078
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
4H0955269 Front Left Headlight Washer Nozzle Cover Product Overview
The component shown under 4H0955269 is a front left headlight washer nozzle cover intended for AUDI A8 2011. The visible cover closes the bumper opening around the washer unit and follows the surrounding bumper contour when the nozzle is retracted. Confirm the left orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for A8
Compatibility for 4H0955269 should be confirmed against AUDI A8 2011 and the left installation side. The review should check regional variations in headlamp-cleaning equipment, check whether the bumper is standard or sport specification, and confirm that the listed model designation matches the vehicle. Use the removed part and product photographs to match the mounting pattern around the bumper aperture, compare product photographs with the removed part from several angles, and confirm whether a cap, nozzle, bracket or complete assembly is required; finally, separate mirrored left and right items during inventory selection and review painted, primed and unpainted finish requirements.
Headlight Washer Nozzle Cover Function and Design Notes
The visible and hidden interfaces of AD02010-078 should be checked separately. For this headlight washer nozzle cover, check whether the visible part requires painting, review the clip geometry on the rear face, and compare the retracted position with the bumper surface. A direct comparison with the removed part should additionally inspect the washer outlet for blockage, check the fluid inlet for storage contamination, and review the hose spigot angle on the washer nozzle. Before the item is accepted, compare the cap perimeter and corner radii and inspect the rear reinforcement ribs.
OE Identification and Side Confirmation
4H0955269 is the primary OE identity for this left front left headlight washer nozzle cover, while AD02010-078 is the internal item code. Match both references to the vehicle record, then retain the removed component for a direct physical comparison. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-078 begins before the bumper area is disturbed: keep dirt out of open washer-fluid lines and paint or finish visible covers before final installation when required. During trial fitting, reconnect every hose clip before filling the system, test for drips after the washer pump stops, and inspect the bumper opening after the trial fit. Before returning the vehicle to service, complete a final visual check under even lighting, protect the painted bumper surface during removal, and trial-fit the component before final fastening.
Receiving Inspection
When AD02010-078 arrives, receiving staff should confirm the nozzle outlet is clean and unobstructed, inspect mounting holes for flash, blockage or edge damage, and review the production finish against the approved sample. Before workshop release, check molded tabs for whitening, cracks or transport stress, compare connector depth and hose angle with the retained original part, inspect projecting pins before placing the item on a hard bench, and inspect the visible cover face for scratches or pressure marks. Complete the inspection by ensuring that staff verify the supplied scope before discarding dividers or inner bags, confirm that small seals or clips have not remained in the wrapping, and match the item label to the purchase order and OE reference.
Product Technical Specifications
| Product type | Front Left Headlight Washer Nozzle Cover |
|---|---|
| Primary OE reference | 4H0955269 |
| Cross-reference numbers | 4H0 955 269 4H0955269 |
| Internal item code | AD02010-078 |
| Vehicle brand | AUDI |
| Vehicle model | A8 |
| Model year | 2011 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Left |
| Applicable vehicle | AUDI A8 2011 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 4H0955269, please confirm sample approval before mass shipment, state the required order quantity, and separate left and right items on the packing list. Packing instructions should confirm whether caps and nozzles should be supplied as pairs, request moisture protection for sea freight, and state any outer-carton marking requirements. Before dispatch, provide the complete destination address or port and plug open fluid connections during packing.
Frequently Asked Questions
Is a sample order available for 4H0955269?
Sample and wholesale arrangements can be discussed after the OE reference, application, side, quantity and shipping destination are provided. For item AD02010-078, the approval should verify the packed quantity by OE reference. The same item record should also include the full OE reference on the purchase order.
How should 4H0955269 be checked before installation?
Compare the OE number, side, mounting points, bumper contour, hose connection and supplied scope with the removed washer component before fitting. On the listed AUDI A8 2011, technicians should separate mirrored left and right items during inventory selection. A workshop comparison should additionally check regional variations in headlamp-cleaning equipment.
Is workshop installation recommended for 4H0955269?
Yes. A qualified workshop can access the bumper area on the A8, transfer hoses or clips safely and test the washer system for correct operation and leaks. For the left-side order line, keep dirt out of open washer-fluid lines. The order review should further verify that the cover closes without rubbing the bumper.
Why must left and right versions of 4H0955269 be distinguished?
Headlight washer components are normally side-specific. Their bumper contours, hose angles, tabs and nozzle directions should not be assumed interchangeable. The product-specific check for 4H0955269 should compare the visible bumper-side contour. Receiving staff should also check the bumper-facing surface for transport marks.
Can product photographs alone confirm 4H0955269 compatibility?
Photographs are useful for visual comparison, but the full OE number, vehicle year, bumper version, side and washer equipment must also match. Before this headlight washer nozzle cover is accepted, confirm that the listed model designation matches the vehicle. Before approval, the buyer or technician should verify nearby parking-sensor or trim interfaces.
