4N0955275 Front Left Headlight Washer Nozzle Cover for AUDI A8 2019
Primary OE reference: 4N0955275
Cross-reference number 1: 4N0 955 275
Cross-reference number 2: 4N0955275
Product type: Front Left Headlight Washer Nozzle Cover
Vehicle application: AUDI A8 2019
Installation position: Front bumper / headlight washer area
Side: Left
Brand: AUDI
Model: A8
Model year: 2019
Product function: Closes the bumper washer opening and restores the visible exterior contour around the headlamp.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.
Internal item code: AD02010-067
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
4N0955275 Front Left Headlight Washer Nozzle Cover Product Overview
The component shown under 4N0955275 is a front left headlight washer nozzle cover intended for AUDI A8 2019. The visible cover closes the bumper opening around the washer unit and follows the surrounding bumper contour when the nozzle is retracted. Confirm the left orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for A8
Compatibility for 4N0955275 should be confirmed against AUDI A8 2019 and the left installation side. The review should use the full OE number, not a partial family reference, separate mirrored left and right items during inventory selection, and compare the complete OE marking with the removed washer component. Use the removed part and product photographs to confirm that the vehicle is equipped with a factory headlight washer system, match the exact model year and bumper revision, and verify the required left or right installation side; finally, check whether the bumper is standard or sport specification and review facelift and pre-facelift washer layouts.
Headlight Washer Nozzle Cover Function and Design Notes
The visible and hidden interfaces of AD02010-067 should be checked separately. For this headlight washer nozzle cover, review any paint-preparation requirement before fitting, check the cap hinge or retaining point, and inspect the base bracket around every locating slot. A direct comparison with the removed part should additionally compare the depth of the actuator body, review the left-to-right mirrored geometry, and check each molded locator against the original component. Before the item is accepted, inspect the hose connector for ovality and compare the visible bumper-side contour.
OE Identification and Side Confirmation
4N0955275 is the primary OE identity for this left front left headlight washer nozzle cover, while AD02010-067 is the internal item code. Match both references to the vehicle record, then verify the required left or right installation side. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-067 begins before the bumper area is disturbed: disconnect the fluid hose without twisting the plastic spigot and clean the hose and connector before assembly. During trial fitting, paint or finish visible covers before final installation when required, inspect the bumper opening after the trial fit, and trial-fit the component before final fastening. Before returning the vehicle to service, support the bumper cover while accessing the hidden actuator, compare the installed height with the opposite side, and retain the original fasteners unless replacements are specified.
Receiving Inspection
When AD02010-067 arrives, receiving staff should check the actuator body for straightness before trial installation, check the spring-return area where the component includes an actuator, and measure the main mounting span when two bumper versions appear similar. Before workshop release, check painted or primed surfaces under neutral lighting, verify the nozzle head returns smoothly without applying excess force, confirm the bumper-facing edge has not been compressed in transit, and match the item label to the purchase order and OE reference. Complete the inspection by ensuring that staff check the cap hinge or retaining point for free movement, review the hose spigot for impact damage or distortion, and confirm that small seals or clips have not remained in the wrapping.
Product Technical Specifications
| Product type | Front Left Headlight Washer Nozzle Cover |
|---|---|
| Primary OE reference | 4N0955275 |
| Cross-reference numbers | 4N0 955 275 4N0955275 |
| Internal item code | AD02010-067 |
| Vehicle brand | AUDI |
| Vehicle model | A8 |
| Model year | 2019 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Left |
| Applicable vehicle | AUDI A8 2019 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 4N0955275, please request export-carton dimensions before freight booking, use dividers to prevent caps from rubbing each other, and identify the required installation side. Packing instructions should check carton labels at receiving, request replacement-part documentation when required, and protect hose spigots and projecting tabs. Before dispatch, confirm pallet requirements for larger quantities and provide the complete destination address or port.
Frequently Asked Questions
What information should accompany a 4N0955275 enquiry?
Send the complete OE number, vehicle model and year, installation side, original-part photographs, quantity and delivery destination. For item AD02010-067, the approval should confirm the acceptable delivery window. The same item record should also list model years and bumper versions for mixed orders.
Which side uses 4N0955275?
This front left headlight washer nozzle cover is catalogued for the left side of the front bumper. Opposite-side washer parts normally use mirrored geometry and a different OE reference. On the listed AUDI A8 2019, technicians should review the clip geometry on the rear face. A workshop comparison should additionally review any paint-preparation requirement before fitting.
Does the finish specification matter for 4N0955275?
Yes. A visible headlight washer nozzle cover may be primed, painted or textured for a specific bumper version. Compare the original surface and colour requirements before installation. For the left-side order line, check the cap hinge or retaining point. The order review should further check each molded locator against the original component.
Should the washer system be tested after fitting 4N0955275?
Yes. Check nozzle movement, cap closure, spray direction, hose routing and leakage before the bumper-area repair is completed. The product-specific check for 4N0955275 should compare the installed height with the opposite side. Receiving staff should also trial-fit the component before final fastening.
How should 4N0955275 be checked before installation?
Compare the OE number, side, mounting points, bumper contour, hose connection and supplied scope with the removed washer component before fitting. Before this headlight washer nozzle cover is accepted, compare the actuator orientation behind the bumper cover. Before approval, the buyer or technician should compare the actuator orientation behind the bumper cover.
