4G8955101 Front Left Headlight Washer Nozzle for AUDI A7 2014
Primary OE reference: 4G8955101
Cross-reference number 1: 4G8 955 101
Cross-reference number 2: 4G8955101
Product type: Front Left Headlight Washer Nozzle
Vehicle application: AUDI A7 2014
Installation position: Front bumper / headlight washer area
Side: Left
Brand: AUDI
Model: A7
Model year: 2014
Product function: Directs washer fluid toward the headlamp lens as part of the vehicle headlight-cleaning system.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
System check: After installation, check hose routing, nozzle movement, spray direction and fluid leakage.
Internal item code: AD02010-065
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
4G8955101 Front Left Headlight Washer Nozzle Product Overview
The component shown under 4G8955101 is a front left headlight washer nozzle intended for AUDI A7 2014. The washer nozzle receives pressurized fluid, moves toward the headlamp where applicable and directs spray across the lens surface. Confirm the left orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for A7
Compatibility for 4G8955101 should be confirmed against AUDI A7 2014 and the left installation side. The review should verify that the OE reference is not for the opposite side, verify the required left or right installation side, and compare every tab, clip seat and locating shoulder. Use the removed part and product photographs to retain the removed component for a direct physical comparison, compare the complete OE marking with the removed washer component, and verify nearby parking-sensor or trim interfaces; finally, match the mounting pattern around the bumper aperture and check the washer jet position relative to the headlamp lens.
Headlight Washer Nozzle Function and Design Notes
The visible and hidden interfaces of AD02010-065 should be checked separately. For this headlight washer nozzle, inspect the rear reinforcement ribs, compare the distance between mounting points, and review the left-to-right mirrored geometry. A direct comparison with the removed part should additionally check the bumper-facing surface for transport marks, inspect the washer outlet for blockage, and compare the support flange width. Before the item is accepted, review the engagement of the cover with the nozzle stem and check each molded locator against the original component.
OE Identification and Side Confirmation
4G8955101 is the primary OE identity for this left front left headlight washer nozzle, while AD02010-065 is the internal item code. Match both references to the vehicle record, then review facelift and pre-facelift washer layouts. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-065 begins before the bumper area is disturbed: compare the installed height with the opposite side and check the headlamp lens receives an even spray. During trial fitting, complete a final visual check under even lighting, transfer reusable clips only after checking their condition, and check the system for leaks after reconnection. Before returning the vehicle to service, support the bumper cover while accessing the hidden actuator, confirm sufficient clearance behind the bumper, and reconnect every hose clip before filling the system.
Receiving Inspection
When AD02010-065 arrives, receiving staff should inspect the rear locator shape without forcing any movable section, compare the visible surface texture with the ordered specification, and match the item label to the purchase order and OE reference. Before workshop release, compare connector depth and hose angle with the retained original part, measure the main mounting span when two bumper versions appear similar, compare left and right orientation before removing protective wrapping, and separate mirrored components immediately after carton opening. Complete the inspection by ensuring that staff inspect the fluid passage only with clean, non-damaging tools, record carton damage before the item is moved to workshop stock, and confirm that small seals or clips have not remained in the wrapping.
Product Technical Specifications
| Product type | Front Left Headlight Washer Nozzle |
|---|---|
| Primary OE reference | 4G8955101 |
| Cross-reference numbers | 4G8 955 101 4G8955101 |
| Internal item code | AD02010-065 |
| Vehicle brand | AUDI |
| Vehicle model | A7 |
| Model year | 2014 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Left |
| Applicable vehicle | AUDI A7 2014 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 4G8955101, please identify painted and unpainted variants on separate lines, separate left and right items on the packing list, and request barcode or private-label details when needed. Packing instructions should use dividers to prevent caps from rubbing each other, state the required order quantity, and protect hose spigots and projecting tabs. Before dispatch, retain the product label until fitment is confirmed and confirm sample approval before mass shipment.
Frequently Asked Questions
Can 4G8955101 fit every A7 model year?
No. Styling changes and market equipment can alter washer locations and mounting geometry. Use the listed year and full OE number as the starting point for confirmation. For item AD02010-065, the approval should compare the actuator orientation behind the bumper cover. The same item record should also compare the actuator orientation behind the bumper cover.
Is workshop installation recommended for 4G8955101?
Yes. A qualified workshop can access the bumper area on the A7, transfer hoses or clips safely and test the washer system for correct operation and leaks. On the listed AUDI A7 2014, technicians should verify that the cover closes without rubbing the bumper. A workshop comparison should additionally tighten bracket hardware only after alignment.
Is 4G8955101 a complete headlight washer system?
No. This listing covers the pictured headlight washer nozzle. The pump, reservoir, hoses, opposite-side parts and headlamp assembly are not included unless shown in the photographs. For the left-side order line, check carton labels at receiving. The order review should further use dividers to prevent caps from rubbing each other.
How should 4G8955101 be packed for export?
The front left headlight washer nozzle should be wrapped separately, with visible faces, hose spigots, nozzle outlets and projecting tabs protected from compression and contamination. The product-specific check for 4G8955101 should request replacement-part documentation when required. Receiving staff should also request protective inner wrapping for painted faces.
Is a sample order available for 4G8955101?
Sample and wholesale arrangements can be discussed after the OE reference, application, side, quantity and shipping destination are provided. Before this headlight washer nozzle is accepted, verify the packed quantity by OE reference. Before approval, the buyer or technician should protect each nozzle outlet from dust during transit.
