4K0955101 Front Left Headlight Washer Nozzle for AUDI A6 2019
Primary OE reference: 4K0955101
Cross-reference number 1: 4K0 955 101
Cross-reference number 2: 4K0955101
Product type: Front Left Headlight Washer Nozzle
Vehicle application: AUDI A6 2019
Installation position: Front bumper / headlight washer area
Side: Left
Brand: AUDI
Model: A6
Model year: 2019
Product function: Directs washer fluid toward the headlamp lens as part of the vehicle headlight-cleaning system.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
System check: After installation, check hose routing, nozzle movement, spray direction and fluid leakage.
Internal item code: AD02010-043
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
4K0955101 Front Left Headlight Washer Nozzle Product Overview
The component shown under 4K0955101 is a front left headlight washer nozzle intended for AUDI A6 2019. The washer nozzle receives pressurized fluid, moves toward the headlamp where applicable and directs spray across the lens surface. Confirm the left orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for A6
Compatibility for 4K0955101 should be confirmed against AUDI A6 2019 and the left installation side. The review should check regional variations in headlamp-cleaning equipment, check whether the bumper is standard or sport specification, and confirm that the listed model designation matches the vehicle. Use the removed part and product photographs to match the mounting pattern around the bumper aperture, compare product photographs with the removed part from several angles, and confirm whether a cap, nozzle, bracket or complete assembly is required; finally, separate mirrored left and right items during inventory selection and review painted, primed and unpainted finish requirements.
Headlight Washer Nozzle Function and Design Notes
The visible and hidden interfaces of AD02010-043 should be checked separately. For this headlight washer nozzle, compare the retracted position with the bumper surface, inspect the washer outlet for blockage, and check the fluid inlet for storage contamination. A direct comparison with the removed part should additionally review the hose spigot angle on the washer nozzle, compare the cap perimeter and corner radii, and inspect the rear reinforcement ribs. Before the item is accepted, check the nozzle outlet orientation and review any paint-preparation requirement before fitting.
OE Identification and Side Confirmation
4K0955101 is the primary OE identity for this left front left headlight washer nozzle, while AD02010-043 is the internal item code. Match both references to the vehicle record, then retain the removed component for a direct physical comparison. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-043 begins before the bumper area is disturbed: clean the hose and connector before assembly and verify that the cap remains attached through a full washer cycle. During trial fitting, keep dirt out of open washer-fluid lines, paint or finish visible covers before final installation when required, and reconnect every hose clip before filling the system. Before returning the vehicle to service, test for drips after the washer pump stops, inspect the bumper opening after the trial fit, and complete a final visual check under even lighting.
Receiving Inspection
When AD02010-043 arrives, receiving staff should inspect the fluid passage only with clean, non-damaging tools, inspect the rear locator shape without forcing any movable section, and check the cap hinge or retaining point for free movement. Before workshop release, verify the nozzle head returns smoothly without applying excess force, check the spring-return area where the component includes an actuator, separate mirrored components immediately after carton opening, and document any shortage before the receiving inspection is closed. Complete the inspection by ensuring that staff verify the cover contour against the approved product photograph, retain the OE label until the washer system has passed its function test, and check the carton partition for evidence of part-to-part contact.
Product Technical Specifications
| Product type | Front Left Headlight Washer Nozzle |
|---|---|
| Primary OE reference | 4K0955101 |
| Cross-reference numbers | 4K0 955 101 4K0955101 |
| Internal item code | AD02010-043 |
| Vehicle brand | AUDI |
| Vehicle model | A6 |
| Model year | 2019 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Left |
| Applicable vehicle | AUDI A6 2019 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 4K0955101, please request moisture protection for sea freight, state any outer-carton marking requirements, and provide the complete destination address or port. Packing instructions should plug open fluid connections during packing, identify project stock and service stock separately, and confirm pallet requirements for larger quantities. Before dispatch, verify the packed quantity by OE reference and send photographs of the removed washer part.
Frequently Asked Questions
Is 4K0955101 a complete headlight washer system?
No. This listing covers the pictured headlight washer nozzle. The pump, reservoir, hoses, opposite-side parts and headlamp assembly are not included unless shown in the photographs. For item AD02010-043, the approval should check carton labels at receiving. The same item record should also confirm the acceptable delivery window.
Can 4K0955101 fit every A6 model year?
No. Styling changes and market equipment can alter washer locations and mounting geometry. Use the listed year and full OE number as the starting point for confirmation. On the listed AUDI A6 2019, technicians should use the full OE number, not a partial family reference. A workshop comparison should additionally use the full OE number, not a partial family reference.
What information should accompany a 4K0955101 enquiry?
Send the complete OE number, vehicle model and year, installation side, original-part photographs, quantity and delivery destination. For the left-side order line, request moisture protection for sea freight. The order review should further use dividers to prevent caps from rubbing each other.
Which side uses 4K0955101?
This front left headlight washer nozzle is catalogued for the left side of the front bumper. Opposite-side washer parts normally use mirrored geometry and a different OE reference. The product-specific check for 4K0955101 should compare the depth of the actuator body. Receiving staff should also check the cap hinge or retaining point.
How should 4K0955101 be packed for export?
The front left headlight washer nozzle should be wrapped separately, with visible faces, hose spigots, nozzle outlets and projecting tabs protected from compression and contamination. Before this headlight washer nozzle is accepted, request moisture protection for sea freight. Before approval, the buyer or technician should state the target vehicle application.
