8T0955102D Front Right Headlight Washer Nozzle for AUDI A5 2013
Primary OE reference: 8T0955102D
Cross-reference number 1: 8T0 955 102D
Cross-reference number 2: 8T0955102D
Product type: Front Right Headlight Washer Nozzle
Vehicle application: AUDI A5 2013
Installation position: Front bumper / headlight washer area
Side: Right
Brand: AUDI
Model: A5
Model year: 2013
Product function: Directs washer fluid toward the headlamp lens as part of the vehicle headlight-cleaning system.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
System check: After installation, check hose routing, nozzle movement, spray direction and fluid leakage.
Internal item code: AD02010-038
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
8T0955102D Front Right Headlight Washer Nozzle Product Overview
The component shown under 8T0955102D is a front right headlight washer nozzle intended for AUDI A5 2013. The washer nozzle receives pressurized fluid, moves toward the headlamp where applicable and directs spray across the lens surface. Confirm the right orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for A5
Compatibility for 8T0955102D should be confirmed against AUDI A5 2013 and the right installation side. The review should verify nearby parking-sensor or trim interfaces, confirm the front bumper option before ordering, and verify the required left or right installation side. Use the removed part and product photographs to check the production date where model-year transitions overlap, check regional variations in headlamp-cleaning equipment, and review body-style differences within the same model generation; finally, confirm that the vehicle is equipped with a factory headlight washer system and match the mounting pattern around the bumper aperture.
Headlight Washer Nozzle Function and Design Notes
The visible and hidden interfaces of AD02010-038 should be checked separately. For this headlight washer nozzle, compare the visible bumper-side contour, inspect narrow plastic tips before installation, and check each molded locator against the original component. A direct comparison with the removed part should additionally review the hose spigot angle on the washer nozzle, compare the depth of the actuator body, and inspect the actuator barrel for impact damage. Before the item is accepted, check the cap hinge or retaining point and review the sealing area around the hose connection.
OE Identification and Side Confirmation
8T0955102D is the primary OE identity for this right front right headlight washer nozzle, while AD02010-038 is the internal item code. Match both references to the vehicle record, then inspect the bumper cutout shape and surrounding contour. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-038 begins before the bumper area is disturbed: keep dirt out of open washer-fluid lines and work with the washer system depressurized. During trial fitting, keep dirt out of open washer-fluid lines, work with the washer system depressurized, and keep dirt out of open washer-fluid lines. Before returning the vehicle to service, work with the washer system depressurized, keep dirt out of open washer-fluid lines, and work with the washer system depressurized.
Receiving Inspection
When AD02010-038 arrives, receiving staff should confirm the nozzle outlet is clean and unobstructed, verify the cover contour against the approved product photograph, and confirm that loose accessories are identified on the packing list. Before workshop release, verify the supplied scope before discarding dividers or inner bags, confirm the bumper-facing edge has not been compressed in transit, separate mirrored components immediately after carton opening, and compare the visible surface texture with the ordered specification. Complete the inspection by ensuring that staff inspect projecting pins before placing the item on a hard bench, confirm the internal item code before mixed stock is shelved, and verify the nozzle head returns smoothly without applying excess force.
Product Technical Specifications
| Product type | Front Right Headlight Washer Nozzle |
|---|---|
| Primary OE reference | 8T0955102D |
| Cross-reference numbers | 8T0 955 102D 8T0955102D |
| Internal item code | AD02010-038 |
| Vehicle brand | AUDI |
| Vehicle model | A5 |
| Model year | 2013 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Right |
| Applicable vehicle | AUDI A5 2013 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 8T0955102D, please confirm sample approval before mass shipment, request barcode or private-label details when needed, and confirm whether the visible cover needs a primed or finished surface. Packing instructions should state any outer-carton marking requirements, check carton labels at receiving, and request protective inner wrapping for painted faces. Before dispatch, verify the packed quantity by OE reference and retain the product label until fitment is confirmed.
Frequently Asked Questions
Can 8T0955102D fit every A5 model year?
No. Styling changes and market equipment can alter washer locations and mounting geometry. Use the listed year and full OE number as the starting point for confirmation. For item AD02010-038, the approval should verify the required left or right installation side. The same item record should also confirm the destination-market equipment specification.
Can product photographs alone confirm 8T0955102D compatibility?
Photographs are useful for visual comparison, but the full OE number, vehicle year, bumper version, side and washer equipment must also match. On the listed AUDI A5 2013, technicians should compare the washer opening beside the correct headlamp. A workshop comparison should additionally check the production date where model-year transitions overlap.
What should be inspected when 8T0955102D arrives?
Check the item label, side, contour, tabs, fluid connection, supplied components and carton condition before fitting or discarding the packaging. For the right-side order line, inspect the fluid passage only with clean, non-damaging tools. The order review should further review the production finish against the approved sample.
Does the finish specification matter for 8T0955102D?
Yes. A visible headlight washer nozzle may be primed, painted or textured for a specific bumper version. Compare the original surface and colour requirements before installation. The product-specific check for 8T0955102D should check the fluid inlet for storage contamination. Receiving staff should also check whether the visible part requires painting.
How should 8T0955102D be checked before installation?
Compare the OE number, side, mounting points, bumper contour, hose connection and supplied scope with the removed washer component before fitting. Before this headlight washer nozzle is accepted, retain the removed component for a direct physical comparison. Before approval, the buyer or technician should separate mirrored left and right items during inventory selection.
