8K0955275 Front Left Headlight Washer Nozzle Cover for AUDI A4 2009
Primary OE reference: 8K0955275
Cross-reference number 1: 8K0 955 275
Cross-reference number 2: 8K0955275
Product type: Front Left Headlight Washer Nozzle Cover
Vehicle application: AUDI A4 2009
Installation position: Front bumper / headlight washer area
Side: Left
Brand: AUDI
Model: A4
Model year: 2009
Product function: Closes the bumper washer opening and restores the visible exterior contour around the headlamp.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.
Internal item code: AD02010-031
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
8K0955275 Front Left Headlight Washer Nozzle Cover Product Overview
The component shown under 8K0955275 is a front left headlight washer nozzle cover intended for AUDI A4 2009. The visible cover closes the bumper opening around the washer unit and follows the surrounding bumper contour when the nozzle is retracted. Confirm the left orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for A4
Compatibility for 8K0955275 should be confirmed against AUDI A4 2009 and the left installation side. The review should confirm that the listed model designation matches the vehicle, verify that the OE reference is not for the opposite side, and confirm the destination-market equipment specification. Use the removed part and product photographs to compare the complete OE marking with the removed washer component, check whether the original cover is supplied separately from its support, and review painted, primed and unpainted finish requirements; finally, compare the hose connection or cover hinge with the original part and match the exact model year and bumper revision.
Headlight Washer Nozzle Cover Function and Design Notes
The visible and hidden interfaces of AD02010-031 should be checked separately. For this headlight washer nozzle cover, compare the outer surface profile with the bumper opening, inspect the base bracket around every locating slot, and check the fluid inlet for storage contamination. A direct comparison with the removed part should additionally review the sealing area around the hose connection, compare the distance between mounting points, and inspect the washer outlet for blockage. Before the item is accepted, check each molded locator against the original component and review the bracket stiffness and screw seats.
OE Identification and Side Confirmation
8K0955275 is the primary OE identity for this left front left headlight washer nozzle cover, while AD02010-031 is the internal item code. Match both references to the vehicle record, then verify nearby parking-sensor or trim interfaces. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-031 begins before the bumper area is disturbed: reconnect every hose clip before filling the system and confirm that no hose is pinched behind the bumper. During trial fitting, transfer reusable clips only after checking their condition, avoid forcing a mirrored part into the bumper opening, and keep dirt out of open washer-fluid lines. Before returning the vehicle to service, use hand pressure rather than levering narrow plastic tabs, retain the original fasteners unless replacements are specified, and trial-fit the component before final fastening.
Receiving Inspection
When AD02010-031 arrives, receiving staff should confirm that loose accessories are identified on the packing list, measure the main mounting span when two bumper versions appear similar, and confirm that loose accessories are identified on the packing list. Before workshop release, measure the main mounting span when two bumper versions appear similar, confirm that loose accessories are identified on the packing list, measure the main mounting span when two bumper versions appear similar, and confirm that loose accessories are identified on the packing list. Complete the inspection by ensuring that staff measure the main mounting span when two bumper versions appear similar, confirm that loose accessories are identified on the packing list, and measure the main mounting span when two bumper versions appear similar.
Product Technical Specifications
| Product type | Front Left Headlight Washer Nozzle Cover |
|---|---|
| Primary OE reference | 8K0955275 |
| Cross-reference numbers | 8K0 955 275 8K0955275 |
| Internal item code | AD02010-031 |
| Vehicle brand | AUDI |
| Vehicle model | A4 |
| Model year | 2009 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Left |
| Applicable vehicle | AUDI A4 2009 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 8K0955275, please protect each nozzle outlet from dust during transit, confirm sample requirements before a bulk order, and request moisture protection for sea freight. Packing instructions should identify painted and unpainted variants on separate lines, protect hose spigots and projecting tabs, and provide the consignee and freight-forwarder details. Before dispatch, confirm the acceptable delivery window and plug open fluid connections during packing.
Frequently Asked Questions
Can product photographs alone confirm 8K0955275 compatibility?
Photographs are useful for visual comparison, but the full OE number, vehicle year, bumper version, side and washer equipment must also match. For item AD02010-031, the approval should compare the actuator orientation behind the bumper cover. The same item record should also compare product photographs with the removed part from several angles.
Which vehicle application is listed for 8K0955275?
8K0955275 is listed for AUDI A4 2009. Confirm the complete OE reference, model year, bumper specification and installation side against the vehicle. On the listed AUDI A4 2009, technicians should inspect the bumper cutout shape and surrounding contour. A workshop comparison should additionally confirm that the listed model designation matches the vehicle.
What information should accompany a 8K0955275 enquiry?
Send the complete OE number, vehicle model and year, installation side, original-part photographs, quantity and delivery destination. For the left-side order line, confirm whether the visible cover needs a primed or finished surface. The order review should further use dividers to prevent caps from rubbing each other.
Should the washer system be tested after fitting 8K0955275?
Yes. Check nozzle movement, cap closure, spray direction, hose routing and leakage before the bumper-area repair is completed. The product-specific check for 8K0955275 should photograph the original routing before disassembly. Receiving staff should also follow the vehicle workshop procedure for bumper removal.
Does the finish specification matter for 8K0955275?
Yes. A visible headlight washer nozzle cover may be primed, painted or textured for a specific bumper version. Compare the original surface and colour requirements before installation. Before this headlight washer nozzle cover is accepted, check the nozzle outlet orientation. Before approval, the buyer or technician should check the cap hinge or retaining point.
