8V5955276 Front Right Headlight Washer Nozzle Cover for AUDI A3 2014
Primary OE reference: 8V5955276
Cross-reference number 1: 8V5 955 276
Cross-reference number 2: 8V5955276
Product type: Front Right Headlight Washer Nozzle Cover
Vehicle application: AUDI A3 2014
Installation position: Front bumper / headlight washer area
Side: Right
Brand: AUDI
Model: A3
Model year: 2014
Product function: Closes the bumper washer opening and restores the visible exterior contour around the headlamp.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.
Internal item code: AD02010-012
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
8V5955276 Front Right Headlight Washer Nozzle Cover Product Overview
The component shown under 8V5955276 is a front right headlight washer nozzle cover intended for AUDI A3 2014. The visible cover closes the bumper opening around the washer unit and follows the surrounding bumper contour when the nozzle is retracted. Confirm the right orientation, washer-system connection, bumper-side geometry and sedan application against the original vehicle part.
Fitment and Washer-System Application for A3
Compatibility for 8V5955276 should be confirmed against AUDI A3 2014 and the right installation side. The review should inspect the bumper cutout shape and surrounding contour, compare the nozzle travel direction with the vehicle-side installation, and confirm that the listed model designation matches the vehicle. Use the removed part and product photographs to review body-style differences within the same model generation, check the washer jet position relative to the headlamp lens, and compare the complete OE marking with the removed washer component; finally, verify the required left or right installation side and compare the washer opening beside the correct headlamp.
Headlight Washer Nozzle Cover Function and Design Notes
The visible and hidden interfaces of AD02010-012 should be checked separately. For this headlight washer nozzle cover, check the nozzle outlet orientation, review the sealing area around the hose connection, and compare the support flange width. A direct comparison with the removed part should additionally inspect the hose connector for ovality, check the cap hinge or retaining point, and review the spring-loaded return features where fitted. Before the item is accepted, compare the distance between mounting points and inspect the actuator barrel for impact damage.
OE Identification and Side Confirmation
8V5955276 is the primary OE identity for this right front right headlight washer nozzle cover, while AD02010-012 is the internal item code. Match both references to the vehicle record, then confirm the destination-market equipment specification. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-012 begins before the bumper area is disturbed: reconfirm the OE number before discarding the packaging and avoid forcing a mirrored part into the bumper opening. During trial fitting, check that the washer unit is fully seated in its guide, complete a final visual check under even lighting, and test the spray direction before returning the vehicle. Before returning the vehicle to service, paint or finish visible covers before final installation when required, retain the original fasteners unless replacements are specified, and check the system for leaks after reconnection.
Receiving Inspection
When AD02010-012 arrives, receiving staff should check the cap hinge or retaining point for free movement, inspect the rear locator shape without forcing any movable section, and inspect the fluid passage only with clean, non-damaging tools. Before workshop release, verify that protective plugs remain in open fluid connections, confirm that loose accessories are identified on the packing list, compare the supplied side with the vehicle repair order, and compare the visible surface texture with the ordered specification. Complete the inspection by ensuring that staff record carton damage before the item is moved to workshop stock, protect the visible face again after inspection is complete, and check the actuator body for straightness before trial installation.
Product Technical Specifications
| Product type | Front Right Headlight Washer Nozzle Cover |
|---|---|
| Primary OE reference | 8V5955276 |
| Cross-reference numbers | 8V5 955 276 8V5955276 |
| Internal item code | AD02010-012 |
| Vehicle brand | AUDI |
| Vehicle model | A3 |
| Model year | 2014 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Right |
| Version / specification | sedan application |
| Applicable vehicle | AUDI A3 2014 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 8V5955276, please protect hose spigots and projecting tabs, request a packing-list breakdown by internal item code, and protect hose spigots and projecting tabs. Packing instructions should request a packing-list breakdown by internal item code, protect hose spigots and projecting tabs, and request a packing-list breakdown by internal item code. Before dispatch, protect hose spigots and projecting tabs and request a packing-list breakdown by internal item code.
Frequently Asked Questions
How should 8V5955276 be packed for export?
The front right headlight washer nozzle cover should be wrapped separately, with visible faces, hose spigots, nozzle outlets and projecting tabs protected from compression and contamination. For item AD02010-012, the approval should list model years and bumper versions for mixed orders. The same item record should also confirm whether the visible cover needs a primed or finished surface.
Should the washer system be tested after fitting 8V5955276?
Yes. Check nozzle movement, cap closure, spray direction, hose routing and leakage before the bumper-area repair is completed. On the listed AUDI A3 2014, technicians should check the system for leaks after reconnection. A workshop comparison should additionally compare the installed height with the opposite side.
What should be inspected when 8V5955276 arrives?
Check the item label, side, contour, tabs, fluid connection, supplied components and carton condition before fitting or discarding the packaging. For the right-side order line, check the cap hinge or retaining point for free movement. The order review should further review the production finish against the approved sample.
Why must left and right versions of 8V5955276 be distinguished?
Headlight washer components are normally side-specific. Their bumper contours, hose angles, tabs and nozzle directions should not be assumed interchangeable. The product-specific check for 8V5955276 should review the clip geometry on the rear face. Receiving staff should also review the left-to-right mirrored geometry.
Does the finish specification matter for 8V5955276?
Yes. A visible headlight washer nozzle cover may be primed, painted or textured for a specific bumper version. Compare the original surface and colour requirements before installation. Before this headlight washer nozzle cover is accepted, check whether the visible part requires painting. Before approval, the buyer or technician should check the cap hinge or retaining point.
