8V0955101A Front Left Headlight Washer Nozzle for AUDI A3 2017
Primary OE reference: 8V0955101A
Cross-reference number 1: 8V0 955 101A
Cross-reference number 2: 8V0955101A
Product type: Front Left Headlight Washer Nozzle
Vehicle application: AUDI A3 2017
Installation position: Front bumper / headlight washer area
Side: Left
Brand: AUDI
Model: A3
Model year: 2017
Product function: Directs washer fluid toward the headlamp lens as part of the vehicle headlight-cleaning system.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
System check: After installation, check hose routing, nozzle movement, spray direction and fluid leakage.
Internal item code: AD02010-005
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
8V0955101A Front Left Headlight Washer Nozzle Product Overview
The component shown under 8V0955101A is a front left headlight washer nozzle intended for AUDI A3 2017. The washer nozzle receives pressurized fluid, moves toward the headlamp where applicable and directs spray across the lens surface. Confirm the left orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for A3
Compatibility for 8V0955101A should be confirmed against AUDI A3 2017 and the left installation side. The review should confirm the front bumper option before ordering, review facelift and pre-facelift washer layouts, and verify that the OE reference is not for the opposite side. Use the removed part and product photographs to check whether the original cover is supplied separately from its support, match the exact model year and bumper revision, and retain the removed component for a direct physical comparison; finally, match the connector and fluid inlet position where applicable and separate mirrored left and right items during inventory selection.
Headlight Washer Nozzle Function and Design Notes
The visible and hidden interfaces of AD02010-005 should be checked separately. For this headlight washer nozzle, review the engagement of the cover with the nozzle stem, check the cap hinge or retaining point, and inspect the rear reinforcement ribs. A direct comparison with the removed part should additionally compare the retracted position with the bumper surface, review the spring-loaded return features where fitted, and check each molded locator against the original component. Before the item is accepted, inspect the telescopic body for smooth movement and compare the distance between mounting points.
OE Identification and Side Confirmation
8V0955101A is the primary OE identity for this left front left headlight washer nozzle, while AD02010-005 is the internal item code. Match both references to the vehicle record, then separate mirrored left and right items during inventory selection. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-005 begins before the bumper area is disturbed: confirm sufficient clearance behind the bumper and transfer reusable clips only after checking their condition. During trial fitting, compare the installed height with the opposite side, confirm that the nozzle extends and retracts freely, and test for drips after the washer pump stops. Before returning the vehicle to service, clean the hose and connector before assembly, confirm that no hose is pinched behind the bumper, and tighten bracket hardware only after alignment.
Receiving Inspection
When AD02010-005 arrives, receiving staff should review the hose spigot for impact damage or distortion, confirm that loose accessories are identified on the packing list, and inspect mounting holes for flash, blockage or edge damage. Before workshop release, check the cap hinge or retaining point for free movement, inspect projecting pins before placing the item on a hard bench, document any shortage before the receiving inspection is closed, and match the item label to the purchase order and OE reference. Complete the inspection by ensuring that staff compare left and right orientation before removing protective wrapping, record carton damage before the item is moved to workshop stock, and confirm the bumper-facing edge has not been compressed in transit.
Product Technical Specifications
| Product type | Front Left Headlight Washer Nozzle |
|---|---|
| Primary OE reference | 8V0955101A |
| Cross-reference numbers | 8V0 955 101A 8V0955101A |
| Internal item code | AD02010-005 |
| Vehicle brand | AUDI |
| Vehicle model | A3 |
| Model year | 2017 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Left |
| Applicable vehicle | AUDI A3 2017 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 8V0955101A, please state any outer-carton marking requirements, verify the packed quantity by OE reference, and request replacement-part documentation when required. Packing instructions should confirm the acceptable delivery window, identify painted and unpainted variants on separate lines, and protect each nozzle outlet from dust during transit. Before dispatch, state the required order quantity and provide the complete destination address or port.
Frequently Asked Questions
Is 8V0955101A a complete headlight washer system?
No. This listing covers the pictured headlight washer nozzle. The pump, reservoir, hoses, opposite-side parts and headlamp assembly are not included unless shown in the photographs. For item AD02010-005, the approval should list model years and bumper versions for mixed orders. The same item record should also check carton labels at receiving.
Should the washer system be tested after fitting 8V0955101A?
Yes. Check nozzle movement, cap closure, spray direction, hose routing and leakage before the bumper-area repair is completed. On the listed AUDI A3 2017, technicians should verify that the cover closes without rubbing the bumper. A workshop comparison should additionally retain the original fasteners unless replacements are specified.
Which vehicle application is listed for 8V0955101A?
8V0955101A is listed for AUDI A3 2017. Confirm the complete OE reference, model year, bumper specification and installation side against the vehicle. For the left-side order line, verify nearby parking-sensor or trim interfaces. The order review should further separate mirrored left and right items during inventory selection.
How should 8V0955101A be checked before installation?
Compare the OE number, side, mounting points, bumper contour, hose connection and supplied scope with the removed washer component before fitting. The product-specific check for 8V0955101A should separate mirrored left and right items during inventory selection. Receiving staff should also compare the actuator orientation behind the bumper cover.
Why must left and right versions of 8V0955101A be distinguished?
Headlight washer components are normally side-specific. Their bumper contours, hose angles, tabs and nozzle directions should not be assumed interchangeable. Before this headlight washer nozzle is accepted, check the bumper-facing surface for transport marks. Before approval, the buyer or technician should check the cap hinge or retaining point.
