8Y0855275A Front Left Headlight Washer Nozzle Cover for AUDI A3 2021
Primary OE reference: 8Y0855275A
Cross-reference number 1: 8Y0 855 275 A
Cross-reference number 2: 8Y0855275A
Product type: Front Left Headlight Washer Nozzle Cover
Vehicle application: AUDI A3 2021
Installation position: Front bumper / headlight washer area
Side: Left
Brand: AUDI
Model: A3
Model year: 2021
Product function: Closes the bumper washer opening and restores the visible exterior contour around the headlamp.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.
Internal item code: AD02010-003
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
8Y0855275A Front Left Headlight Washer Nozzle Cover Product Overview
The component shown under 8Y0855275A is a front left headlight washer nozzle cover intended for AUDI A3 2021. The visible cover closes the bumper opening around the washer unit and follows the surrounding bumper contour when the nozzle is retracted. Confirm the left orientation, washer-system connection, bumper-side geometry and sport version against the original vehicle part.
Fitment and Washer-System Application for A3
Compatibility for 8Y0855275A should be confirmed against AUDI A3 2021 and the left installation side. The review should confirm whether a cap, nozzle, bracket or complete assembly is required, check regional variations in headlamp-cleaning equipment, and compare every tab, clip seat and locating shoulder. Use the removed part and product photographs to check the washer jet position relative to the headlamp lens, match the exact model year and bumper revision, and confirm the destination-market equipment specification; finally, confirm whether a cap, nozzle, bracket or complete assembly is required and check regional variations in headlamp-cleaning equipment.
Headlight Washer Nozzle Cover Function and Design Notes
The visible and hidden interfaces of AD02010-003 should be checked separately. For this headlight washer nozzle cover, inspect the base bracket around every locating slot, compare the distance between mounting points, and review the bracket stiffness and screw seats. A direct comparison with the removed part should additionally check the cap hinge or retaining point, inspect narrow plastic tips before installation, and compare the support flange width. Before the item is accepted, review any paint-preparation requirement before fitting and check the nozzle outlet orientation.
OE Identification and Side Confirmation
8Y0855275A is the primary OE identity for this left front left headlight washer nozzle cover, while AD02010-003 is the internal item code. Match both references to the vehicle record, then confirm that the vehicle is equipped with a factory headlight washer system. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-003 begins before the bumper area is disturbed: trial-fit the component before final fastening and keep dirt out of open washer-fluid lines. During trial fitting, confirm that no hose is pinched behind the bumper, test the spray direction before returning the vehicle, and compare the installed height with the opposite side. Before returning the vehicle to service, protect the painted bumper surface during removal, verify that the cap remains attached through a full washer cycle, and check the headlamp lens receives an even spray.
Receiving Inspection
When AD02010-003 arrives, receiving staff should inspect projecting pins before placing the item on a hard bench, review the production finish against the approved sample, and measure the main mounting span when two bumper versions appear similar. Before workshop release, confirm the internal item code before mixed stock is shelved, check the carton partition for evidence of part-to-part contact, document any shortage before the receiving inspection is closed, and verify the nozzle head returns smoothly without applying excess force. Complete the inspection by ensuring that staff inspect the fluid passage only with clean, non-damaging tools, compare the supplied side with the vehicle repair order, and protect the visible face again after inspection is complete.
Product Technical Specifications
| Product type | Front Left Headlight Washer Nozzle Cover |
|---|---|
| Primary OE reference | 8Y0855275A |
| Cross-reference numbers | 8Y0 855 275 A 8Y0855275A |
| Internal item code | AD02010-003 |
| Vehicle brand | AUDI |
| Vehicle model | A3 |
| Model year | 2021 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Left |
| Version / specification | sport version |
| Applicable vehicle | AUDI A3 2021 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 8Y0855275A, please confirm whether caps and nozzles should be supplied as pairs, protect each nozzle outlet from dust during transit, and retain the product label until fitment is confirmed. Packing instructions should include the full OE reference on the purchase order, confirm pallet requirements for larger quantities, and separate left and right items on the packing list. Before dispatch, request a packing-list breakdown by internal item code and list model years and bumper versions for mixed orders.
Frequently Asked Questions
Why must left and right versions of 8Y0855275A be distinguished?
Headlight washer components are normally side-specific. Their bumper contours, hose angles, tabs and nozzle directions should not be assumed interchangeable. For item AD02010-003, the approval should check the fluid inlet for storage contamination. The same item record should also check the fluid inlet for storage contamination.
Is 8Y0855275A a complete headlight washer system?
No. This listing covers the pictured headlight washer nozzle cover. The pump, reservoir, hoses, opposite-side parts and headlamp assembly are not included unless shown in the photographs. On the listed AUDI A3 2021, technicians should plug open fluid connections during packing. A workshop comparison should additionally request a packing-list breakdown by internal item code.
Should the washer system be tested after fitting 8Y0855275A?
Yes. Check nozzle movement, cap closure, spray direction, hose routing and leakage before the bumper-area repair is completed. For the left-side order line, test the spray direction before returning the vehicle. The order review should further verify that the cover closes without rubbing the bumper.
Is a sample order available for 8Y0855275A?
Sample and wholesale arrangements can be discussed after the OE reference, application, side, quantity and shipping destination are provided. The product-specific check for 8Y0855275A should identify the required installation side. Receiving staff should also confirm sample requirements before a bulk order.
Can product photographs alone confirm 8Y0855275A compatibility?
Photographs are useful for visual comparison, but the full OE number, vehicle year, bumper version, side and washer equipment must also match. Before this headlight washer nozzle cover is accepted, confirm the destination-market equipment specification. Before approval, the buyer or technician should retain the removed component for a direct physical comparison.
