76815-SYJ-H01 Front Left Headlight Washer Nozzle for HONDA Elysion 2013
Primary OE reference: 76815-SYJ-H01
Cross-reference number 1: 76815-SYJ-H01
Cross-reference number 2: 76815SYJH01
Product type: Front Left Headlight Washer Nozzle
Vehicle application: HONDA Elysion 2013
Installation position: Front bumper / headlight washer area
Side: Left
Brand: HONDA
Model: Elysion
Model year: 2013
Product function: Directs washer fluid toward the headlamp lens as part of the vehicle headlight-cleaning system.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
System check: After installation, check hose routing, nozzle movement, spray direction and fluid leakage.
Internal item code: HD02010-029
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
76815-SYJ-H01 Front Left Headlight Washer Nozzle Product Overview
The component shown under 76815-SYJ-H01 is a front left headlight washer nozzle intended for HONDA Elysion 2013. The washer nozzle receives pressurized fluid, moves toward the headlamp where applicable and directs spray across the lens surface. Confirm the left orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for Elysion
Compatibility for 76815-SYJ-H01 should be confirmed against HONDA Elysion 2013 and the left installation side. The review should verify that the OE reference is not for the opposite side, verify the required left or right installation side, and compare every tab, clip seat and locating shoulder. Use the removed part and product photographs to retain the removed component for a direct physical comparison, compare the complete OE marking with the removed washer component, and verify nearby parking-sensor or trim interfaces; finally, match the mounting pattern around the bumper aperture and check the washer jet position relative to the headlamp lens.
Headlight Washer Nozzle Function and Design Notes
The visible and hidden interfaces of HD02010-029 should be checked separately. For this headlight washer nozzle, inspect narrow plastic tips before installation, compare the depth of the actuator body, and review the sealing area around the hose connection. A direct comparison with the removed part should additionally check whether the visible part requires painting, inspect the rear reinforcement ribs, and compare the distance between mounting points. Before the item is accepted, review the left-to-right mirrored geometry and check the bumper-facing surface for transport marks.
OE Identification and Side Confirmation
76815-SYJ-H01 is the primary OE identity for this left front left headlight washer nozzle, while HD02010-029 is the internal item code. Match both references to the vehicle record, then review facelift and pre-facelift washer layouts. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for HD02010-029 begins before the bumper area is disturbed: avoid forcing a mirrored part into the bumper opening and tighten bracket hardware only after alignment. During trial fitting, paint or finish visible covers before final installation when required, verify that the cover closes without rubbing the bumper, and confirm that no hose is pinched behind the bumper. Before returning the vehicle to service, protect the painted bumper surface during removal, route the washer hose away from sharp edges, and clean the hose and connector before assembly.
Receiving Inspection
When HD02010-029 arrives, receiving staff should verify the nozzle head returns smoothly without applying excess force, confirm that loose accessories are identified on the packing list, and check the actuator body for straightness before trial installation. Before workshop release, inspect the visible cover face for scratches or pressure marks, inspect mounting holes for flash, blockage or edge damage, confirm the internal item code before mixed stock is shelved, and verify the cover contour against the approved product photograph. Complete the inspection by ensuring that staff check the cap hinge or retaining point for free movement, compare the supplied side with the vehicle repair order, and check painted or primed surfaces under neutral lighting.
Product Technical Specifications
| Product type | Front Left Headlight Washer Nozzle |
|---|---|
| Primary OE reference | 76815-SYJ-H01 |
| Cross-reference numbers | 76815-SYJ-H01 76815SYJH01 |
| Internal item code | HD02010-029 |
| Vehicle brand | HONDA |
| Vehicle model | Elysion |
| Model year | 2013 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Left |
| Applicable vehicle | HONDA Elysion 2013 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 76815-SYJ-H01, please provide the consignee and freight-forwarder details, verify the packed quantity by OE reference, and identify the required installation side. Packing instructions should state the target vehicle application, confirm pallet requirements for larger quantities, and confirm the acceptable delivery window. Before dispatch, request protective inner wrapping for painted faces and identify project stock and service stock separately.
Frequently Asked Questions
Which side uses 76815-SYJ-H01?
This front left headlight washer nozzle is catalogued for the left side of the front bumper. Opposite-side washer parts normally use mirrored geometry and a different OE reference. For item HD02010-029, the approval should check the joint between the visible cap and hidden support. The same item record should also check the joint between the visible cap and hidden support.
Is workshop installation recommended for 76815-SYJ-H01?
Yes. A qualified workshop can access the bumper area on the Elysion, transfer hoses or clips safely and test the washer system for correct operation and leaks. On the listed HONDA Elysion 2013, technicians should check the system for leaks after reconnection. A workshop comparison should additionally complete a final visual check under even lighting.
Should the washer system be tested after fitting 76815-SYJ-H01?
Yes. Check nozzle movement, cap closure, spray direction, hose routing and leakage before the bumper-area repair is completed. For the left-side order line, protect the painted bumper surface during removal. The order review should further verify that the cover closes without rubbing the bumper.
Can 76815-SYJ-H01 fit every Elysion model year?
No. Styling changes and market equipment can alter washer locations and mounting geometry. Use the listed year and full OE number as the starting point for confirmation. The product-specific check for 76815-SYJ-H01 should compare the complete OE marking with the removed washer component. Receiving staff should also use the full OE number, not a partial family reference.
Which vehicle application is listed for 76815-SYJ-H01?
76815-SYJ-H01 is listed for HONDA Elysion 2013. Confirm the complete OE reference, model year, bumper specification and installation side against the vehicle. Before this headlight washer nozzle is accepted, review facelift and pre-facelift washer layouts. Before approval, the buyer or technician should check regional variations in headlamp-cleaning equipment.
