76880-TR0-S01 Front Right Headlight Washer Nozzle for HONDA Civic 2012
Primary OE reference: 76880-TR0-S01
Cross-reference number 1: 76880-TR0-S01
Cross-reference number 2: 76880TR0S01
Product type: Front Right Headlight Washer Nozzle
Vehicle application: HONDA Civic 2012
Installation position: Front bumper / headlight washer area
Side: Right
Brand: HONDA
Model: Civic
Model year: 2012
Product function: Directs washer fluid toward the headlamp lens as part of the vehicle headlight-cleaning system.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
System check: After installation, check hose routing, nozzle movement, spray direction and fluid leakage.
Internal item code: HD02010-020
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
76880-TR0-S01 Front Right Headlight Washer Nozzle Product Overview
The component shown under 76880-TR0-S01 is a front right headlight washer nozzle intended for HONDA Civic 2012. The washer nozzle receives pressurized fluid, moves toward the headlamp where applicable and directs spray across the lens surface. Confirm the right orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for Civic
Compatibility for 76880-TR0-S01 should be confirmed against HONDA Civic 2012 and the right installation side. The review should match the connector and fluid inlet position where applicable, verify the required left or right installation side, and review painted, primed and unpainted finish requirements. Use the removed part and product photographs to separate mirrored left and right items during inventory selection, confirm whether a cap, nozzle, bracket or complete assembly is required, and compare product photographs with the removed part from several angles; finally, match the mounting pattern around the bumper aperture and confirm that the listed model designation matches the vehicle.
Headlight Washer Nozzle Function and Design Notes
The visible and hidden interfaces of HD02010-020 should be checked separately. For this headlight washer nozzle, inspect the actuator barrel for impact damage, check the fluid inlet for storage contamination, and review any paint-preparation requirement before fitting. A direct comparison with the removed part should additionally compare the distance between mounting points, inspect the telescopic body for smooth movement, and check each molded locator against the original component. Before the item is accepted, review the spring-loaded return features where fitted and compare the retracted position with the bumper surface.
OE Identification and Side Confirmation
76880-TR0-S01 is the primary OE identity for this right front right headlight washer nozzle, while HD02010-020 is the internal item code. Match both references to the vehicle record, then check regional variations in headlamp-cleaning equipment. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for HD02010-020 begins before the bumper area is disturbed: photograph the original routing before disassembly and inspect the bumper opening after the trial fit. During trial fitting, confirm that no hose is pinched behind the bumper, retain the original fasteners unless replacements are specified, and complete a final visual check under even lighting. Before returning the vehicle to service, reconfirm the OE number before discarding the packaging, work with the washer system depressurized, and protect the painted bumper surface during removal.
Receiving Inspection
When HD02010-020 arrives, receiving staff should inspect mounting holes for flash, blockage or edge damage, confirm that small seals or clips have not remained in the wrapping, and compare the supplied side with the vehicle repair order. Before workshop release, check the spring-return area where the component includes an actuator, photograph the received item if the vehicle fitment is still pending, review the production finish against the approved sample, and match the item label to the purchase order and OE reference. Complete the inspection by ensuring that staff confirm that loose accessories are identified on the packing list, separate mirrored components immediately after carton opening, and confirm the internal item code before mixed stock is shelved.
Product Technical Specifications
| Product type | Front Right Headlight Washer Nozzle |
|---|---|
| Primary OE reference | 76880-TR0-S01 |
| Cross-reference numbers | 76880-TR0-S01 76880TR0S01 |
| Internal item code | HD02010-020 |
| Vehicle brand | HONDA |
| Vehicle model | Civic |
| Model year | 2012 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Right |
| Applicable vehicle | HONDA Civic 2012 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 76880-TR0-S01, please identify the required installation side, protect hose spigots and projecting tabs, and confirm whether caps and nozzles should be supplied as pairs. Packing instructions should confirm the preferred incoterm, separate fragile actuator bodies from heavier metal parts, and verify the packed quantity by OE reference. Before dispatch, state the required order quantity and confirm whether the visible cover needs a primed or finished surface.
Frequently Asked Questions
Why must left and right versions of 76880-TR0-S01 be distinguished?
Headlight washer components are normally side-specific. Their bumper contours, hose angles, tabs and nozzle directions should not be assumed interchangeable. For item HD02010-020, the approval should compare the visible bumper-side contour. The same item record should also check the complete supplied scope against the photographs.
Is workshop installation recommended for 76880-TR0-S01?
Yes. A qualified workshop can access the bumper area on the Civic, transfer hoses or clips safely and test the washer system for correct operation and leaks. On the listed HONDA Civic 2012, technicians should verify that the cover closes without rubbing the bumper. A workshop comparison should additionally clean the hose and connector before assembly.
Which vehicle application is listed for 76880-TR0-S01?
76880-TR0-S01 is listed for HONDA Civic 2012. Confirm the complete OE reference, model year, bumper specification and installation side against the vehicle. For the right-side order line, compare the actuator orientation behind the bumper cover. The order review should further check whether the original cover is supplied separately from its support.
Can 76880-TR0-S01 fit every Civic model year?
No. Styling changes and market equipment can alter washer locations and mounting geometry. Use the listed year and full OE number as the starting point for confirmation. The product-specific check for 76880-TR0-S01 should retain the removed component for a direct physical comparison. Receiving staff should also compare the actuator orientation behind the bumper cover.
How should 76880-TR0-S01 be checked before installation?
Compare the OE number, side, mounting points, bumper contour, hose connection and supplied scope with the removed washer component before fitting. Before this headlight washer nozzle is accepted, compare the hose connection or cover hinge with the original part. Before approval, the buyer or technician should inspect the bumper cutout shape and surrounding contour.
