76881-TL0-S01 Front Right Headlight Washer Nozzle Cover for HONDA Spirior 2009
Primary OE reference: 76881-TL0-S01
Cross-reference number 1: 76881-TL0-S01
Cross-reference number 2: 76881TL0S01
Product type: Front Right Headlight Washer Nozzle Cover
Vehicle application: HONDA Spirior 2009
Installation position: Front bumper / headlight washer area
Side: Right
Brand: HONDA
Model: Spirior
Model year: 2009
Product function: Closes the bumper washer opening and restores the visible exterior contour around the headlamp.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.
Internal item code: HD02010-016
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
76881-TL0-S01 Front Right Headlight Washer Nozzle Cover Product Overview
The component shown under 76881-TL0-S01 is a front right headlight washer nozzle cover intended for HONDA Spirior 2009. The visible cover closes the bumper opening around the washer unit and follows the surrounding bumper contour when the nozzle is retracted. Confirm the right orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for Spirior
Compatibility for 76881-TL0-S01 should be confirmed against HONDA Spirior 2009 and the right installation side. The review should verify the required left or right installation side, verify that the OE reference is not for the opposite side, and compare product photographs with the removed part from several angles. Use the removed part and product photographs to compare the washer opening beside the correct headlamp, check regional variations in headlamp-cleaning equipment, and use the full OE number, not a partial family reference; finally, compare the hose connection or cover hinge with the original part and match the connector and fluid inlet position where applicable.
Headlight Washer Nozzle Cover Function and Design Notes
The visible and hidden interfaces of HD02010-016 should be checked separately. For this headlight washer nozzle cover, check the fluid inlet for storage contamination, inspect the hose connector for ovality, and compare the depth of the actuator body. A direct comparison with the removed part should additionally review any paint-preparation requirement before fitting, check whether the visible part requires painting, and inspect the molded tabs for cracks or distortion. Before the item is accepted, compare the distance between mounting points and review the hose spigot angle on the washer nozzle.
OE Identification and Side Confirmation
76881-TL0-S01 is the primary OE identity for this right front right headlight washer nozzle cover, while HD02010-016 is the internal item code. Match both references to the vehicle record, then compare the actuator orientation behind the bumper cover. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for HD02010-016 begins before the bumper area is disturbed: inspect nearby wiring and sensors before refitting trim and check the system for leaks after reconnection. During trial fitting, retain the original fasteners unless replacements are specified, paint or finish visible covers before final installation when required, and test the spray direction before returning the vehicle. Before returning the vehicle to service, complete a final visual check under even lighting, check that the washer unit is fully seated in its guide, and avoid forcing a mirrored part into the bumper opening.
Receiving Inspection
When HD02010-016 arrives, receiving staff should compare left and right orientation before removing protective wrapping, verify the supplied scope before discarding dividers or inner bags, and check the cap hinge or retaining point for free movement. Before workshop release, measure the main mounting span when two bumper versions appear similar, protect the visible face again after inspection is complete, verify the cover contour against the approved product photograph, and compare connector depth and hose angle with the retained original part. Complete the inspection by ensuring that staff verify that protective plugs remain in open fluid connections, confirm the internal item code before mixed stock is shelved, and match the item label to the purchase order and OE reference.
Product Technical Specifications
| Product type | Front Right Headlight Washer Nozzle Cover |
|---|---|
| Primary OE reference | 76881-TL0-S01 |
| Cross-reference numbers | 76881-TL0-S01 76881TL0S01 |
| Internal item code | HD02010-016 |
| Vehicle brand | HONDA |
| Vehicle model | Spirior |
| Model year | 2009 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Right |
| Applicable vehicle | HONDA Spirior 2009 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 76881-TL0-S01, please verify the packed quantity by OE reference, identify painted and unpainted variants on separate lines, and provide the complete destination address or port. Packing instructions should identify the required installation side, separate left and right items on the packing list, and confirm sample requirements before a bulk order. Before dispatch, state the target vehicle application and request barcode or private-label details when needed.
Frequently Asked Questions
Is a sample order available for 76881-TL0-S01?
Sample and wholesale arrangements can be discussed after the OE reference, application, side, quantity and shipping destination are provided. For item HD02010-016, the approval should protect each nozzle outlet from dust during transit. The same item record should also provide the complete destination address or port.
Which vehicle application is listed for 76881-TL0-S01?
76881-TL0-S01 is listed for HONDA Spirior 2009. Confirm the complete OE reference, model year, bumper specification and installation side against the vehicle. On the listed HONDA Spirior 2009, technicians should separate mirrored left and right items during inventory selection. A workshop comparison should additionally check regional variations in headlamp-cleaning equipment.
What information should accompany a 76881-TL0-S01 enquiry?
Send the complete OE number, vehicle model and year, installation side, original-part photographs, quantity and delivery destination. For the right-side order line, separate left and right items on the packing list. The order review should further use dividers to prevent caps from rubbing each other.
Which side uses 76881-TL0-S01?
This front right headlight washer nozzle cover is catalogued for the right side of the front bumper. Opposite-side washer parts normally use mirrored geometry and a different OE reference. The product-specific check for 76881-TL0-S01 should inspect the hose connector for ovality. Receiving staff should also inspect the molded tabs for cracks or distortion.
What should be inspected when 76881-TL0-S01 arrives?
Check the item label, side, contour, tabs, fluid connection, supplied components and carton condition before fitting or discarding the packaging. Before this headlight washer nozzle cover is accepted, compare the visible surface texture with the ordered specification. Before approval, the buyer or technician should document any shortage before the receiving inspection is closed.
