76886-TA1-M01ZL Front Left Headlight Washer Nozzle Cover for HONDA Accord 2008
Primary OE reference: 76886-TA1-M01ZL
Cross-reference number 1: 76886-TA1-M01ZL
Cross-reference number 2: 76886TA1M01ZL
Product type: Front Left Headlight Washer Nozzle Cover
Vehicle application: HONDA Accord 2008
Installation position: Front bumper / headlight washer area
Side: Left
Brand: HONDA
Model: Accord
Model year: 2008
Product function: Closes the bumper washer opening and restores the visible exterior contour around the headlamp.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.
Internal item code: HD02010-001
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
76886-TA1-M01ZL Front Left Headlight Washer Nozzle Cover Product Overview
The component shown under 76886-TA1-M01ZL is a front left headlight washer nozzle cover intended for HONDA Accord 2008. The visible cover closes the bumper opening around the washer unit and follows the surrounding bumper contour when the nozzle is retracted. Confirm the left orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for Accord
Compatibility for 76886-TA1-M01ZL should be confirmed against HONDA Accord 2008 and the left installation side. The review should verify nearby parking-sensor or trim interfaces, confirm the front bumper option before ordering, and verify the required left or right installation side. Use the removed part and product photographs to check the production date where model-year transitions overlap, check regional variations in headlamp-cleaning equipment, and review body-style differences within the same model generation; finally, confirm that the vehicle is equipped with a factory headlight washer system and match the mounting pattern around the bumper aperture.
Headlight Washer Nozzle Cover Function and Design Notes
The visible and hidden interfaces of HD02010-001 should be checked separately. For this headlight washer nozzle cover, compare the retracted position with the bumper surface, inspect the base bracket around every locating slot, and check the bumper-facing surface for transport marks. A direct comparison with the removed part should additionally review any paint-preparation requirement before fitting, compare the cap-to-support engagement method, and inspect the washer outlet for blockage. Before the item is accepted, check the complete supplied scope against the photographs and review the spring-loaded return features where fitted.
OE Identification and Side Confirmation
76886-TA1-M01ZL is the primary OE identity for this left front left headlight washer nozzle cover, while HD02010-001 is the internal item code. Match both references to the vehicle record, then inspect the bumper cutout shape and surrounding contour. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for HD02010-001 begins before the bumper area is disturbed: align the cover flush with the bumper surface and compare the installed height with the opposite side. During trial fitting, align the cover flush with the bumper surface, compare the installed height with the opposite side, and align the cover flush with the bumper surface. Before returning the vehicle to service, compare the installed height with the opposite side, align the cover flush with the bumper surface, and compare the installed height with the opposite side.
Receiving Inspection
When HD02010-001 arrives, receiving staff should review the production finish against the approved sample, check the carton partition for evidence of part-to-part contact, and inspect the fluid passage only with clean, non-damaging tools. Before workshop release, match the item label to the purchase order and OE reference, confirm the nozzle outlet is clean and unobstructed, verify the cover contour against the approved product photograph, and confirm that loose accessories are identified on the packing list. Complete the inspection by ensuring that staff verify the supplied scope before discarding dividers or inner bags, confirm the bumper-facing edge has not been compressed in transit, and separate mirrored components immediately after carton opening.
Product Technical Specifications
| Product type | Front Left Headlight Washer Nozzle Cover |
|---|---|
| Primary OE reference | 76886-TA1-M01ZL |
| Cross-reference numbers | 76886-TA1-M01ZL 76886TA1M01ZL |
| Internal item code | HD02010-001 |
| Vehicle brand | HONDA |
| Vehicle model | Accord |
| Model year | 2008 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Left |
| Applicable vehicle | HONDA Accord 2008 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 76886-TA1-M01ZL, please identify project stock and service stock separately, identify the required installation side, and confirm sample approval before mass shipment. Packing instructions should request barcode or private-label details when needed, confirm whether the visible cover needs a primed or finished surface, and state any outer-carton marking requirements. Before dispatch, check carton labels at receiving and request protective inner wrapping for painted faces.
Frequently Asked Questions
Does the finish specification matter for 76886-TA1-M01ZL?
Yes. A visible headlight washer nozzle cover may be primed, painted or textured for a specific bumper version. Compare the original surface and colour requirements before installation. For item HD02010-001, the approval should compare the support flange width. The same item record should also check the complete supplied scope against the photographs.
How should 76886-TA1-M01ZL be packed for export?
The front left headlight washer nozzle cover should be wrapped separately, with visible faces, hose spigots, nozzle outlets and projecting tabs protected from compression and contamination. On the listed HONDA Accord 2008, technicians should use dividers to prevent caps from rubbing each other. A workshop comparison should additionally provide the complete destination address or port.
What should be inspected when 76886-TA1-M01ZL arrives?
Check the item label, side, contour, tabs, fluid connection, supplied components and carton condition before fitting or discarding the packaging. For the left-side order line, inspect the fluid passage only with clean, non-damaging tools. The order review should further review the production finish against the approved sample.
Is 76886-TA1-M01ZL a complete headlight washer system?
No. This listing covers the pictured headlight washer nozzle cover. The pump, reservoir, hoses, opposite-side parts and headlamp assembly are not included unless shown in the photographs. The product-specific check for 76886-TA1-M01ZL should confirm pallet requirements for larger quantities. Receiving staff should also retain the product label until fitment is confirmed.
Are clips, hoses or fasteners supplied with 76886-TA1-M01ZL?
The supply scope follows the product photographs. Reusable clips, hoses, seals, screws and separate brackets should be confirmed before the order is finalized. Before this headlight washer nozzle cover is accepted, check carton labels at receiving. Before approval, the buyer or technician should state the requested delivery schedule.
