76881-TA1-M01ZL Front Right Headlight Washer Nozzle Cover for HONDA Accord 2008
Primary OE reference: 76881-TA1-M01ZL
Cross-reference number 1: 76881-TA1-M01ZL
Cross-reference number 2: 76881TA1M01ZL
Product type: Front Right Headlight Washer Nozzle Cover
Vehicle application: HONDA Accord 2008
Installation position: Front bumper / headlight washer area
Side: Right
Brand: HONDA
Model: Accord
Model year: 2008
Product function: Closes the bumper washer opening and restores the visible exterior contour around the headlamp.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.
Internal item code: HD02010-002
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
76881-TA1-M01ZL Front Right Headlight Washer Nozzle Cover Product Overview
The component shown under 76881-TA1-M01ZL is a front right headlight washer nozzle cover intended for HONDA Accord 2008. The visible cover closes the bumper opening around the washer unit and follows the surrounding bumper contour when the nozzle is retracted. Confirm the right orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for Accord
Compatibility for 76881-TA1-M01ZL should be confirmed against HONDA Accord 2008 and the right installation side. The review should confirm whether a cap, nozzle, bracket or complete assembly is required, check regional variations in headlamp-cleaning equipment, and compare every tab, clip seat and locating shoulder. Use the removed part and product photographs to check the washer jet position relative to the headlamp lens, match the exact model year and bumper revision, and confirm the destination-market equipment specification; finally, confirm whether a cap, nozzle, bracket or complete assembly is required and check regional variations in headlamp-cleaning equipment.
Headlight Washer Nozzle Cover Function and Design Notes
The visible and hidden interfaces of HD02010-002 should be checked separately. For this headlight washer nozzle cover, review the engagement of the cover with the nozzle stem, check the complete supplied scope against the photographs, and inspect the base bracket around every locating slot. A direct comparison with the removed part should additionally compare the distance between mounting points, review the bracket stiffness and screw seats, and check the cap hinge or retaining point. Before the item is accepted, inspect narrow plastic tips before installation and compare the support flange width.
OE Identification and Side Confirmation
76881-TA1-M01ZL is the primary OE identity for this right front right headlight washer nozzle cover, while HD02010-002 is the internal item code. Match both references to the vehicle record, then confirm that the vehicle is equipped with a factory headlight washer system. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for HD02010-002 begins before the bumper area is disturbed: complete a final visual check under even lighting and clean the hose and connector before assembly. During trial fitting, use hand pressure rather than levering narrow plastic tabs, transfer reusable clips only after checking their condition, and follow the vehicle workshop procedure for bumper removal. Before returning the vehicle to service, inspect the bumper opening after the trial fit, check the system for leaks after reconnection, and check that the washer unit is fully seated in its guide.
Receiving Inspection
When HD02010-002 arrives, receiving staff should separate mirrored components immediately after carton opening, check the cap hinge or retaining point for free movement, and verify that protective plugs remain in open fluid connections. Before workshop release, compare the visible surface texture with the ordered specification, check the actuator body for straightness before trial installation, confirm that small seals or clips have not remained in the wrapping, and inspect projecting pins before placing the item on a hard bench. Complete the inspection by ensuring that staff review the production finish against the approved sample, measure the main mounting span when two bumper versions appear similar, and confirm the internal item code before mixed stock is shelved.
Product Technical Specifications
| Product type | Front Right Headlight Washer Nozzle Cover |
|---|---|
| Primary OE reference | 76881-TA1-M01ZL |
| Cross-reference numbers | 76881-TA1-M01ZL 76881TA1M01ZL |
| Internal item code | HD02010-002 |
| Vehicle brand | HONDA |
| Vehicle model | Accord |
| Model year | 2008 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Right |
| Applicable vehicle | HONDA Accord 2008 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 76881-TA1-M01ZL, please plug open fluid connections during packing, confirm sample approval before mass shipment, and request export-carton dimensions before freight booking. Packing instructions should confirm the acceptable delivery window, request barcode or private-label details when needed, and provide the complete destination address or port. Before dispatch, provide the consignee and freight-forwarder details and confirm whether the visible cover needs a primed or finished surface.
Frequently Asked Questions
Can 76881-TA1-M01ZL fit every Accord model year?
No. Styling changes and market equipment can alter washer locations and mounting geometry. Use the listed year and full OE number as the starting point for confirmation. For item HD02010-002, the approval should check whether the original cover is supplied separately from its support. The same item record should also compare product photographs with the removed part from several angles.
What information should accompany a 76881-TA1-M01ZL enquiry?
Send the complete OE number, vehicle model and year, installation side, original-part photographs, quantity and delivery destination. On the listed HONDA Accord 2008, technicians should plug open fluid connections during packing. A workshop comparison should additionally plug open fluid connections during packing.
How should 76881-TA1-M01ZL be packed for export?
The front right headlight washer nozzle cover should be wrapped separately, with visible faces, hose spigots, nozzle outlets and projecting tabs protected from compression and contamination. For the right-side order line, confirm sample approval before mass shipment. The order review should further use dividers to prevent caps from rubbing each other.
Which vehicle application is listed for 76881-TA1-M01ZL?
76881-TA1-M01ZL is listed for HONDA Accord 2008. Confirm the complete OE reference, model year, bumper specification and installation side against the vehicle. The product-specific check for 76881-TA1-M01ZL should confirm the front bumper option before ordering. Receiving staff should also use the full OE number, not a partial family reference.
Which side uses 76881-TA1-M01ZL?
This front right headlight washer nozzle cover is catalogued for the right side of the front bumper. Opposite-side washer parts normally use mirrored geometry and a different OE reference. Before this headlight washer nozzle cover is accepted, check the bumper-facing surface for transport marks. Before approval, the buyer or technician should check the cap hinge or retaining point.
