71190-SYK-000 Front Left Headlight Mounting Bracket for HONDA Elysion 2013

71190-SYK-000 Front Left Headlight Mounting Bracket Product Overview

The component shown under 71190-SYK-000 is a front left headlight mounting bracket intended for HONDA Elysion 2013. Confirm the left orientation, lamp-side contour, mounting geometry against the original vehicle part.

Fitment and Application for Elysion

When preparing a Elysion body repair, verify that the grille design matches the stated application, confirm the front installation position, and compare the installation direction. Before final installation, match the accessory to the original bumper revision, compare every locating point and screw opening, and check nearby body-panel interfaces.

During comparison with the original lamp surround, retain the original component for a direct comparison, review headlamp shape changes between production phases, and confirm the decorative finish or painted surface. At the workshop preparation stage, verify the left or right mounting side, compare the stamped or moulded reference, and review the orientation of the moulded bracket.

Before confirming export packing for 71190-SYK-000, check the vehicle production date where available, confirm the decorative finish or painted surface, and compare the installation direction. For a repeat wholesale purchase, compare the headlight outline at both ends, compare the stamped or moulded reference, and match the accessory to the original bumper revision.

Headlight Mounting Bracket Design and Replacement Notes

Before the original trim or bracket is discarded, inspect the moulded front face and rear ribs, compare mounting-hole height, and check the curvature beside the headlamp. Before clips or hardware are transferred, confirm decorative surface details, review fastening slots and clip seats, and inspect moulded corners before installation.

For HONDA Elysion 2013, review fastening slots and clip seats, check the transition to the bumper or grille, and compare the visible texture and finish. At the alignment stage, inspect reinforcement features behind the part, review narrow tips for transport damage, and check the adjoining panel gap.

When preparing a Elysion body repair, compare reusable clips and hardware, compare surrounding grille openings, and inspect the visible face for transport scuffing. For a no-force trial fit, compare the visible texture and finish, compare mounting-hole height, and inspect the junction with the fender edge.

Application-Specific Identification

When the headlamp outline is reviewed with 71190-SYK-000 on the Elysion 2013: compare the complete OE marking with the removed part. The HD02009-123 sample for the left side should review nearby cover openings. Before installation, trial-fit the component without force; for a quotation, confirm the nominated freight forwarder.

Before workshop installation with 71190-SYK-000 on the Elysion 2013: confirm the decorative finish or painted surface. The HD02009-123 sample for the left side should compare the visible texture and finish. Before installation, replace distorted clips before final assembly; for a quotation, list every OE reference on the purchase order.

OE identification begins with 71190-SYK-000 on the Elysion 2013: verify the left or right mounting side. The HD02009-123 sample for the left side should check the transition to the bumper or grille. Before installation, inspect the surrounding guides; for a quotation, send photographs of the removed component.

Installation Guidance

When comparing 71190-SYK-000 with the removed component, check the adjoining panel gaps, reinstall removed seals in their original positions, and inspect each screw or clip point. For an application-specific order, check the finish for tool marks before delivery, confirm an evenly seated fit, and support adjacent body panels evenly.

For the listed 2013 application, confirm the correct fitting direction, confirm a consistent bumper gap, and check that no locator is trapped behind the bumper. During receiving inspection, reconfirm the OE reference after the trial fit, align the headlamp edge before fastening, and check lamp-to-trim clearance.

Before the original trim or bracket is discarded, inspect the surrounding guides, ensure that all removed hardware is accounted for, and check the final perimeter around the lamp. When organizing mixed-OE inventory, check the finish for tool marks before delivery, confirm the correct fitting direction, and use hand pressure only during the initial engagement.

Product Technical Specifications

Wholesale Supply and Packing

Before confirming this headlight accessory, separate painted and unpainted variants, check sample approval before mass shipment, and state the required order quantity. For a repeat wholesale purchase, include the complete OE reference, protect projecting locator tabs, and retain the product and carton labels.

For a body-shop order covering HONDA, state the required order quantity, confirm whether clips are required separately, and confirm barcode or private-label requirements. During the physical comparison, agree the acceptable delivery window, state the target vehicle application, and specify whether the order is for service stock or a project.

When comparing 71190-SYK-000 with the removed component, protect projecting locator tabs, provide the consignee contact information, and support long trim sections during transit. When checking the headlamp opening, state whether left and right pairs should be bundled, inspect the carton at receiving, and ask for carton dimensions before freight booking.

Frequently Asked Questions

What information should be sent with a 71190-SYK-000 enquiry?

Send the complete OE number, vehicle details, installation side, photographs of the original part, quantity and delivery destination. For Elysion, match the locator-slot arrangement; compare mounting-hole height; support adjacent body panels evenly; and ask for carton dimensions before freight booking before fitting or quotation.

Should damaged vehicle-side mounts be checked before fitting 71190-SYK-000?

Yes. Broken lamp tabs, distorted bumper guides or missing retainers can prevent correct alignment even when the replacement reference is correct. For Elysion, check the relationship with the lamp housing; check the curvature beside the headlamp; check the adjoining panel gaps; and protect projecting locator tabs before fitting or quotation.

Can photographs alone confirm 71190-SYK-000 compatibility?

Photographs are useful for visual comparison, but the OE reference, model year, side, trim level and mounting geometry should also match. For Elysion, check the lamp manufacturer where multiple units were fitted; confirm decorative surface details; confirm the correct fitting direction; and specify whether the order is for service stock or a project before fitting or quotation.

Can 71190-SYK-000 fit every Elysion model year?

No. Styling updates and market versions can change the mounting layout. Use the listed year and OE number as the starting point for confirmation. For Elysion, confirm the destination-market version; review fastening slots and clip seats; inspect the surrounding guides; and provide the destination country before fitting or quotation.

Is workshop installation recommended for 71190-SYK-000?

Yes. A body or lighting workshop can inspect damaged mounts on the Elysion, align adjoining panels and avoid forcing a part intended for another version. For Elysion, review facelift and pre-facelift styling; inspect moulded corners before installation; replace distorted clips before final assembly; and state the destination port or city before fitting or quotation.

Request a Quote

Send the complete OE reference 71190-SYK-000, vehicle details, installation side, required quantity and delivery destination. Yongshang Auto can review the application before preparing a product-specific export quotation.