71140-T7A-000 Front Right Headlight Mounting Bracket for HONDA Vezel 2014

71140-T7A-000 Front Right Headlight Mounting Bracket Product Overview

The component shown under 71140-T7A-000 is a front right headlight mounting bracket intended for HONDA Vezel 2014. Confirm the right orientation, lamp-side contour, mounting geometry against the original vehicle part.

Fitment and Application for Vezel

Before confirming this headlight accessory, compare the installation direction, retain the original component for a direct comparison, and check whether the original part is mirrored. Before the quotation is confirmed, match the outer profile around the headlamp, check the lamp manufacturer where multiple units were fitted, and check nearby body-panel interfaces.

For a body-shop order covering HONDA, compare the stamped or moulded reference, review headlamp shape changes between production phases, and confirm whether the vehicle uses a special appearance package. Before packing the confirmed item, match the accessory to the original bumper revision, check the lamp manufacturer where multiple units were fitted, and verify that the grille design matches the stated application.

When comparing 71140-T7A-000 with the removed component, compare the complete OE marking with the removed part, review facelift and pre-facelift styling, and confirm the destination-market version. For an application-specific order, check the lamp manufacturer where multiple units were fitted, check the relationship with the lamp housing, and match the locator-slot arrangement.

Headlight Mounting Bracket Design and Replacement Notes

When reviewing the visible finish on HD02009-101, inspect the junction with the fender edge, review nearby cover openings, and review fastening slots and clip seats. Before final installation, check the depth of the moulded locator channels, compare mounting-hole height, and check the transition to the bumper or grille.

Before sourcing this front right headlight mounting bracket, compare the original edge profile, compare the visible texture and finish, and check the interface with the lamp housing. At the workshop preparation stage, check mirrored geometry against the required side, review the distance between fastening points, and inspect both end geometries.

Before confirming this headlight accessory, check the transition to the bumper or grille, review the thickness around each mounting boss, and review narrow tips for transport damage. For a repeat wholesale purchase, check the depth of the moulded locator channels, measure the removed part where references are unclear, and inspect the visible face for transport scuffing.

Application-Specific Identification

For an export quotation with 71140-T7A-000 on the Vezel 2014: verify the left or right mounting side. The HD02009-101 sample for the right side should inspect the moulded front face and rear ribs. Before installation, confirm a consistent bumper gap; for a quotation, confirm the required finish.

A trim-level comparison requires with 71140-T7A-000 on the Vezel 2014: verify the left or right mounting side. The HD02009-101 sample for the right side should inspect reinforcement features behind the part. Before installation, reinstall removed seals in their original positions; for a quotation, confirm barcode or private-label requirements.

When the headlamp outline is reviewed with 71140-T7A-000 on the Vezel 2014: review facelift and pre-facelift styling. The HD02009-101 sample for the right side should compare the profile below the lamp lens. Before installation, confirm that every locator engages; for a quotation, specify whether the order is for service stock or a project.

Installation Guidance

For replacement in the right front headlamp area, confirm a consistent bumper gap, complete a visual check under even lighting, and route nearby wiring away from sharp edges. Before clips or hardware are transferred, confirm that the hood and fender clearances remain even, verify that no fastener is cross-threaded, and photograph the completed installation for order records.

When separating nearby Vezel variants, route nearby wiring away from sharp edges, protect painted and chrome surfaces, and review whether separate hardware is needed. At the alignment stage, reinstall removed seals in their original positions, align the headlamp edge before fastening, and confirm an evenly seated fit.

When reviewing the visible finish on HD02009-101, verify that no fastener is cross-threaded, check the final perimeter around the lamp, and clean the lamp and bumper mounting area. For a no-force trial fit, verify that the headlamp remains centred, inspect broken vehicle-side mounts, and route nearby wiring away from sharp edges.

Product Technical Specifications

Wholesale Supply and Packing

For wholesale selection of 71140-T7A-000, state the destination port or city, state whether left and right pairs should be bundled, and request a packing-list breakdown by item code. For an application-specific order, request supported export-carton packing, compare the supplied product photographs, and identify mixed-OE orders clearly.

During left-versus-right inventory selection, request corner protection for long moulded parts, include the complete OE reference, and separate left and right items in the packing list. During receiving inspection, state the required order quantity, state the destination port or city, and check sample approval before mass shipment.

For replacement in the right front headlamp area, list every OE reference on the purchase order, state any outer-carton marking requirements, and request a packing-list breakdown by item code. When organizing mixed-OE inventory, confirm replacement-part documentation needs, send photographs of the removed component, and request supported export-carton packing.

Frequently Asked Questions

Can photographs alone confirm 71140-T7A-000 compatibility?

Photographs are useful for visual comparison, but the OE reference, model year, side, trim level and mounting geometry should also match. For Vezel, verify the left or right mounting side; review narrow tips for transport damage; compare the installed height with the opposite side; and confirm pallet requirements for larger quantities before fitting or quotation.

Can 71140-T7A-000 fit every Vezel model year?

No. Styling updates and market versions can change the mounting layout. Use the listed year and OE number as the starting point for confirmation. For Vezel, review the orientation of the moulded bracket; compare the original edge profile; avoid bending narrow moulded tabs; and confirm whether clips are required separately before fitting or quotation.

Is workshop installation recommended for 71140-T7A-000?

Yes. A body or lighting workshop can inspect damaged mounts on the Vezel, align adjoining panels and avoid forcing a part intended for another version. For Vezel, check whether the original part is mirrored; inspect moulded corners before installation; inspect the lamp aim after surrounding parts are refitted; and state any outer-carton marking requirements before fitting or quotation.

Why must left and right versions of 71140-T7A-000 be distinguished?

Headlight-area accessories are usually side-specific. Their curves, holes and locator positions should not be assumed interchangeable. For Vezel, match the body style and equipment grade; inspect the back-side support structure; check the final perimeter around the lamp; and compare the supplied product photographs before fitting or quotation.

How should 71140-T7A-000 be checked before installation?

Compare the OE number, overall outline, locating tabs, screw points, surface finish and lamp-side contour with the removed part before hardware is tightened. For Vezel, check the vehicle production date where available; inspect both end geometries; support adjacent body panels evenly; and separate painted and unpainted variants before fitting or quotation.

Request a Quote

Send the complete OE reference 71140-T7A-000, vehicle details, installation side, required quantity and delivery destination. Yongshang Auto can review the application before preparing a product-specific export quotation.