71140-S9A-000 Front Right Headlight Mounting Bracket for HONDA CR-V 2003

71140-S9A-000 Front Right Headlight Mounting Bracket Product Overview

The component shown under 71140-S9A-000 is a front right headlight mounting bracket intended for HONDA CR-V 2003. Confirm the right orientation, lamp-side contour, mounting geometry against the original vehicle part.

Fitment and Application for CR-V

For HONDA CR-V 2003, confirm the exact model year before placing the order, compare the headlight outline at both ends, and match the outer profile around the headlamp. At the alignment stage, compare the complete OE marking with the removed part, inspect the original lamp-support geometry, and review facelift and pre-facelift styling.

When preparing a CR-V body repair, check the relationship with the lamp housing, match the outer profile around the headlamp, and review the orientation of the moulded bracket. For a no-force trial fit, match the locator-slot arrangement, inspect the original lamp-support geometry, and check whether the original part is mirrored.

During comparison with the original lamp surround, review the orientation of the moulded bracket, match the accessory to the original bumper revision, and match the outer profile around the headlamp. While checking adjacent body parts, compare the stamped or moulded reference, check the relationship with the lamp housing, and compare the headlight outline at both ends.

Headlight Mounting Bracket Design and Replacement Notes

For the listed 2003 application, confirm decorative surface details, compare surrounding grille openings, and check mirrored geometry against the required side. During receiving inspection, inspect moulded corners before installation, review the thickness around each mounting boss, and compare the profile below the lamp lens.

Before the original trim or bracket is discarded, inspect the junction with the fender edge, compare the centre alignment point, and measure the removed part where references are unclear. When organizing mixed-OE inventory, check mirrored geometry against the required side, inspect the moulded front face and rear ribs, and inspect reinforcement features behind the part.

For HONDA CR-V 2003, compare the original edge profile, confirm decorative surface details, and compare the visible texture and finish. While reviewing the supplied photographs, check the depth of the moulded locator channels, check the interface with the lamp housing, and check the curvature beside the headlamp.

Application-Specific Identification

A trim-level comparison requires with 71140-S9A-000 on the CR-V 2003: compare the stamped or moulded reference. The HD02009-072 sample for the right side should inspect the overall frame width. Before installation, trial-fit the component without force; for a quotation, confirm sample-order requirements.

A vehicle-side comparison starts with 71140-S9A-000 on the CR-V 2003: compare the complete OE marking with the removed part. The HD02009-072 sample for the right side should compare the centre alignment point. Before installation, replace distorted clips before final assembly; for a quotation, retain the product and carton labels.

Before workshop installation with 71140-S9A-000 on the CR-V 2003: check the vehicle production date where available. The HD02009-072 sample for the right side should compare gloss level with the neighbouring trim. Before installation, inspect the surrounding guides; for a quotation, request corner protection for long moulded parts.

Installation Guidance

For a body-shop order covering HONDA, check the adjoining panel gaps, protect exposed edges during removal, and verify that the headlamp remains centred. During the physical comparison, reinstall removed seals in their original positions, photograph the completed installation for order records, and inspect broken vehicle-side mounts.

When comparing 71140-S9A-000 with the removed component, confirm the correct fitting direction, use hand pressure only during the initial engagement, and keep the removed part nearby for comparison. When checking the headlamp opening, check that no locator is trapped behind the bumper, check the adjoining panel gaps, and compare the installed height with the opposite side.

For the listed 2003 application, inspect the surrounding guides, confirm a consistent bumper gap, and verify that the headlamp remains centred. Before the carton is sealed, tighten hardware only after alignment, complete a visual check under even lighting, and compare the installed height with the opposite side.

Product Technical Specifications

Wholesale Supply and Packing

Before sourcing this front right headlight mounting bracket, separate left and right items in the packing list, separate painted and unpainted variants, and support long trim sections during transit. While checking adjacent body parts, confirm the requested delivery schedule, confirm pallet requirements for larger quantities, and request supported export-carton packing.

Before confirming this headlight accessory, state whether left and right pairs should be bundled, inspect the carton at receiving, and ask for carton dimensions before freight booking. Before the quotation is confirmed, retain the product and carton labels, confirm the preferred incoterm, and confirm sample-order requirements.

For a body-shop order covering HONDA, state any outer-carton marking requirements, state the required order quantity, and support long trim sections during transit. Before packing the confirmed item, compare the supplied product photographs, request protective inner wrapping, and state whether left and right pairs should be bundled.

Frequently Asked Questions

How should 71140-S9A-000 be checked before installation?

Compare the OE number, overall outline, locating tabs, screw points, surface finish and lamp-side contour with the removed part before hardware is tightened. For CR-V, match the outer profile around the headlamp; check the adjoining panel gap; support adjacent body panels evenly; and specify whether the order is for service stock or a project before fitting or quotation.

Does the finish specification matter for 71140-S9A-000?

Yes. Different vehicle grades can change colour, coating, visible texture and locating details, so compare the original part carefully. For CR-V, match the outer profile around the headlamp; review the outer-edge shape; check the adjoining panel gaps; and state whether left and right pairs should be bundled before fitting or quotation.

Does 71140-S9A-000 include a complete headlamp assembly?

No. This page covers the pictured front right headlight mounting bracket. Lamps, bulbs, wiring, modules and separate fasteners are not included unless visibly shown in the product photographs. For CR-V, match the outer profile around the headlamp; check the depth of the moulded locator channels; confirm the correct fitting direction; and request moisture protection for sea freight before fitting or quotation.

Are clips and screws supplied with 71140-S9A-000?

The supply scope follows the photographs. Reusable clips, screws, retainers or separate brackets should be confirmed before the order is finalized. For CR-V, match the outer profile around the headlamp; compare the centre alignment point; inspect the surrounding guides; and confirm the nominated freight forwarder before fitting or quotation.

Which side uses 71140-S9A-000?

This front right headlight mounting bracket is catalogued for the right front headlamp area. Opposite-side parts normally use mirrored geometry and a different reference. For CR-V, match the outer profile around the headlamp; compare reusable clips and hardware; replace distorted clips before final assembly; and confirm replacement-part documentation needs before fitting or quotation.

Request a Quote

Send the complete OE reference 71140-S9A-000, vehicle details, installation side, required quantity and delivery destination. Yongshang Auto can review the application before preparing a product-specific export quotation.