71190-SNB-000 Front Left Headlight Mounting Bracket for HONDA Ciimo 2012

71190-SNB-000 Front Left Headlight Mounting Bracket Product Overview

The component shown under 71190-SNB-000 is a front left headlight mounting bracket intended for HONDA Ciimo 2012. Confirm the left orientation, lamp-side contour, mounting geometry against the original vehicle part.

Fitment and Application for Ciimo

When reviewing the visible finish on HD02009-069, review facelift and pre-facelift styling, confirm the destination-market version, and check the lamp manufacturer where multiple units were fitted. For a no-force trial fit, check the relationship with the lamp housing, match the locator-slot arrangement, and confirm whether the vehicle uses a special appearance package.

Before sourcing this front left headlight mounting bracket, check nearby body-panel interfaces, retain the original component for a direct comparison, and review headlamp shape changes between production phases. While checking adjacent body parts, confirm the decorative finish or painted surface, verify the left or right mounting side, and compare the stamped or moulded reference.

Before confirming this headlight accessory, verify the trim package named in the application, review headlamp shape changes between production phases, and check the lamp manufacturer where multiple units were fitted. Before the quotation is confirmed, confirm the exact model year before placing the order, verify the left or right mounting side, and check the relationship with the lamp housing.

Headlight Mounting Bracket Design and Replacement Notes

For replacement in the left front headlamp area, inspect the visible face for transport scuffing, review nearby cover openings, and review the direction of the locating tabs. When organizing mixed-OE inventory, review the outer-edge shape, inspect both end geometries, and check mirrored geometry against the required side.

When separating nearby Ciimo variants, inspect both end geometries, review fastening slots and clip seats, and check the transition to the bumper or grille. While reviewing the supplied photographs, compare the visible texture and finish, inspect reinforcement features behind the part, and review narrow tips for transport damage.

When reviewing the visible finish on HD02009-069, check the adjoining panel gap, confirm decorative surface details, and review the distance between fastening points. Before final installation, check the transition to the bumper or grille, review nearby cover openings, and compare the profile below the lamp lens.

Application-Specific Identification

When the headlamp outline is reviewed with 71190-SNB-000 on the Ciimo 2012: verify that the grille design matches the stated application. The HD02009-069 sample for the left side should review the outer-edge shape. Before installation, align the headlamp edge before fastening; for a quotation, retain the product and carton labels.

Before workshop installation with 71190-SNB-000 on the Ciimo 2012: match the body style and equipment grade. The HD02009-069 sample for the left side should review the direction of the locating tabs. Before installation, complete a visual check under even lighting; for a quotation, request supported export-carton packing.

OE identification begins with 71190-SNB-000 on the Ciimo 2012: match the outer profile around the headlamp. The HD02009-069 sample for the left side should inspect moulded corners before installation. Before installation, protect exposed edges during removal; for a quotation, confirm the packing method.

Installation Guidance

For wholesale selection of 71190-SNB-000, complete a visual check under even lighting, check the adjoining panel gaps, and reinstall removed seals in their original positions. When checking the headlamp opening, inspect each screw or clip point, check the finish for tool marks before delivery, and confirm an evenly seated fit.

During left-versus-right inventory selection, confirm that the hood and fender clearances remain even, ensure that all removed hardware is accounted for, and transfer reusable clips carefully. Before the carton is sealed, confirm the correct fitting direction, confirm a consistent bumper gap, and check that no locator is trapped behind the bumper.

For replacement in the left front headlamp area, photograph the completed installation for order records, review whether separate hardware is needed, and verify that no fastener is cross-threaded. Before clips or hardware are transferred, inspect each screw or clip point, confirm that the hood and fender clearances remain even, and avoid bending narrow moulded tabs.

Product Technical Specifications

Wholesale Supply and Packing

Before confirming export packing for 71190-SNB-000, provide the destination country, confirm the required finish, and support long trim sections during transit. Before the quotation is confirmed, confirm sample-order requirements, confirm whether clips are required separately, and state estimated annual purchasing volume.

During an OE-led review for HD02009-069, support long trim sections during transit, confirm the requested delivery schedule, and confirm pallet requirements for larger quantities. Before packing the confirmed item, request supported export-carton packing, confirm the packing method, and list every OE reference on the purchase order.

For wholesale selection of 71190-SNB-000, confirm whether clips are required separately, state any outer-carton marking requirements, and compare the supplied product photographs. For an application-specific order, separate painted and unpainted variants, check the ordered mounting side, and confirm the nominated freight forwarder.

Frequently Asked Questions

What information should be sent with a 71190-SNB-000 enquiry?

Send the complete OE number, vehicle details, installation side, photographs of the original part, quantity and delivery destination. For Ciimo, compare the installation direction; review fastening slots and clip seats; protect painted and chrome surfaces; and state any outer-carton marking requirements before fitting or quotation.

Should damaged vehicle-side mounts be checked before fitting 71190-SNB-000?

Yes. Broken lamp tabs, distorted bumper guides or missing retainers can prevent correct alignment even when the replacement reference is correct. For Ciimo, verify the trim package named in the application; check mirrored geometry against the required side; reinstall removed seals in their original positions; and request corner protection for long moulded parts before fitting or quotation.

Can photographs alone confirm 71190-SNB-000 compatibility?

Photographs are useful for visual comparison, but the OE reference, model year, side, trim level and mounting geometry should also match. For Ciimo, confirm whether the vehicle uses a special appearance package; check the transition to the bumper or grille; confirm an evenly seated fit; and state estimated annual purchasing volume before fitting or quotation.

Can 71190-SNB-000 fit every Ciimo model year?

No. Styling updates and market versions can change the mounting layout. Use the listed year and OE number as the starting point for confirmation. For Ciimo, compare the complete OE marking with the removed part; inspect moulded corners before installation; transfer reusable clips carefully; and support long trim sections during transit before fitting or quotation.

Is workshop installation recommended for 71190-SNB-000?

Yes. A body or lighting workshop can inspect damaged mounts on the Ciimo, align adjoining panels and avoid forcing a part intended for another version. For Ciimo, verify the left or right mounting side; compare the visible texture and finish; verify that no fastener is cross-threaded; and agree the acceptable delivery window before fitting or quotation.

Request a Quote

Send the complete OE reference 71190-SNB-000, vehicle details, installation side, required quantity and delivery destination. Yongshang Auto can review the application before preparing a product-specific export quotation.