71190-T5R-A00 Front Left Headlight Mounting Bracket for HONDA Fit 2015

71190-T5R-A00 Front Left Headlight Mounting Bracket Product Overview

The component shown under 71190-T5R-A00 is a front left headlight mounting bracket intended for HONDA Fit 2015. Confirm the left orientation, lamp-side contour, mounting geometry against the original vehicle part.

Fitment and Application for Fit

Before sourcing this front left headlight mounting bracket, inspect the original lamp-support geometry, compare the headlight outline at both ends, and verify the trim package named in the application. At the workshop preparation stage, check whether the original part is mirrored, compare the stamped or moulded reference, and review headlamp shape changes between production phases.

Before confirming this headlight accessory, confirm whether the vehicle uses a special appearance package, retain the original component for a direct comparison, and confirm the decorative finish or painted surface. For a repeat wholesale purchase, compare the stamped or moulded reference, review regional specification differences, and compare adjacent bumper and grille sections.

For a body-shop order covering HONDA, match the body style and equipment grade, verify the trim package named in the application, and check the vehicle production date where available. During the physical comparison, confirm the exact model year before placing the order, compare the headlight outline at both ends, and match the outer profile around the headlamp.

Headlight Mounting Bracket Design and Replacement Notes

When separating nearby Fit variants, check the interface with the lamp housing, check mirrored geometry against the required side, and review the distance between fastening points. At the alignment stage, inspect both end geometries, compare reusable clips and hardware, and review the outer-edge shape.

When reviewing the visible finish on HD02009-054, compare surrounding grille openings, check the transition to the bumper or grille, and review the thickness around each mounting boss. For a no-force trial fit, review narrow tips for transport damage, check the depth of the moulded locator channels, and measure the removed part where references are unclear.

Before sourcing this front left headlight mounting bracket, check the depth of the moulded locator channels, compare gloss level with the neighbouring trim, and review the distance between fastening points. While checking adjacent body parts, inspect the visible face for transport scuffing, inspect the moulded front face and rear ribs, and compare the original edge profile.

Application-Specific Identification

Before workshop installation with 71190-T5R-A00 on the Fit 2015: check the lamp manufacturer where multiple units were fitted. The HD02009-054 sample for the left side should review the direction of the locating tabs. Before installation, confirm a consistent bumper gap; for a quotation, state the destination port or city.

For side-specific inventory control with 71190-T5R-A00 on the Fit 2015: inspect the original lamp-support geometry. The HD02009-054 sample for the left side should inspect both end geometries. Before installation, reinstall removed seals in their original positions; for a quotation, confirm the required finish.

A vehicle-side comparison starts with 71190-T5R-A00 on the Fit 2015: match the locator-slot arrangement. The HD02009-054 sample for the left side should check the interface with the lamp housing. Before installation, confirm that every locator engages; for a quotation, protect projecting locator tabs.

Installation Guidance

During left-versus-right inventory selection, confirm a consistent bumper gap, check the finish for tool marks before delivery, and avoid bending narrow moulded tabs. During receiving inspection, tighten hardware only after alignment, photograph the completed installation for order records, and check lamp-to-trim clearance.

For replacement in the left front headlamp area, route nearby wiring away from sharp edges, keep the removed part nearby for comparison, and inspect the lamp aim after surrounding parts are refitted. When organizing mixed-OE inventory, review whether separate hardware is needed, ensure that all removed hardware is accounted for, and confirm a consistent bumper gap.

When separating nearby Fit variants, verify that no fastener is cross-threaded, protect painted and chrome surfaces, and avoid bending narrow moulded tabs. While reviewing the supplied photographs, check the final perimeter around the lamp, complete a visual check under even lighting, and use hand pressure only during the initial engagement.

Product Technical Specifications

Wholesale Supply and Packing

During an OE-led review for HD02009-054, protect projecting locator tabs, request corner protection for long moulded parts, and include the complete OE reference. During the physical comparison, separate left and right items in the packing list, state the required order quantity, and state the destination port or city.

For wholesale selection of 71190-T5R-A00, review edge protection inside the carton, check the ordered mounting side, and confirm the packing method. When checking the headlamp opening, request protective inner wrapping, specify whether the order is for service stock or a project, and provide the consignee contact information.

During left-versus-right inventory selection, confirm the packing method, list every OE reference on the purchase order, and include the complete OE reference. Before the carton is sealed, state estimated annual purchasing volume, ask for carton dimensions before freight booking, and provide the destination country.

Frequently Asked Questions

What information should be sent with a 71190-T5R-A00 enquiry?

Send the complete OE number, vehicle details, installation side, photographs of the original part, quantity and delivery destination. For Fit, retain the original component for a direct comparison; compare mounting-hole height; protect painted and chrome surfaces; and protect projecting locator tabs before fitting or quotation.

Should damaged vehicle-side mounts be checked before fitting 71190-T5R-A00?

Yes. Broken lamp tabs, distorted bumper guides or missing retainers can prevent correct alignment even when the replacement reference is correct. For Fit, check the lamp manufacturer where multiple units were fitted; check the curvature beside the headlamp; reinstall removed seals in their original positions; and request the applicable export terms before fitting or quotation.

Can photographs alone confirm 71190-T5R-A00 compatibility?

Photographs are useful for visual comparison, but the OE reference, model year, side, trim level and mounting geometry should also match. For Fit, compare the headlight outline at both ends; confirm decorative surface details; confirm an evenly seated fit; and state whether left and right pairs should be bundled before fitting or quotation.

Can 71190-T5R-A00 fit every Fit model year?

No. Styling updates and market versions can change the mounting layout. Use the listed year and OE number as the starting point for confirmation. For Fit, review the orientation of the moulded bracket; review fastening slots and clip seats; transfer reusable clips carefully; and agree the acceptable delivery window before fitting or quotation.

Is workshop installation recommended for 71190-T5R-A00?

Yes. A body or lighting workshop can inspect damaged mounts on the Fit, align adjoining panels and avoid forcing a part intended for another version. For Fit, compare every locating point and screw opening; inspect moulded corners before installation; verify that no fastener is cross-threaded; and retain the product and carton labels before fitting or quotation.

Request a Quote

Send the complete OE reference 71190-T5R-A00, vehicle details, installation side, required quantity and delivery destination. Yongshang Auto can review the application before preparing a product-specific export quotation.