71107-T9J-T50 Front Left Fog Light Bezel for HONDA City 2015

71107-T9J-T50 Front Left Fog Light Bezel Product Overview

This product page presents 71107-T9J-T50 for buyers comparing a front left fog light bezel for HONDA City 2015. Check the left orientation, lamp opening, mounting tabs and high-specification specification against the original component.

Fitment and Application for City

During comparison with the original lamp surround, confirm the vehicle market, inspect the lamp aperture size, and compare the full OE marking. At the workshop preparation stage, confirm the model year, match the stated trim level, and review market-version differences.

For replacement in the left front area, verify the mounting side, review the bezel orientation, and match the stated trim level. For a repeat wholesale order, check the vehicle build date, compare the full OE marking, and review facelift styling.

When separating nearby City variants, match the outer contour, review facelift styling, and confirm the bumper position. While reviewing the supplied photographs, check the nearby lamp opening, compare every fixing tab, and inspect the removed bezel.

Front Left Fog Light Bezel Design and Replacement Notes

During an OE-led review for HD02008-117, inspect the frame width, check the bezel curvature, and review narrow bezel ends. During the physical comparison, compare mounting-hole height, review locator direction, and inspect reinforcement ribs.

For wholesale selection of 71107-T9J-T50, review locator direction, review the outer-edge shape, and inspect the back-side structure. When checking the bumper opening, inspect reinforcement ribs, compare the centre alignment, and compare vent or grille openings.

Before sourcing this front left fog light bezel, compare the surface texture, inspect reinforcement ribs, and review narrow bezel ends. At the workshop preparation stage, check the adjoining gap, compare transferred hardware, and measure the original length.

Application-Specific Identification Notes

Before a replacement is packed with 71107-T9J-T50 on the City 2015: inspect the lamp aperture size. The HD02008-117 sample for the left side should check the bezel curvature. For HONDA identification, 71107-T9J-T50 also requires technicians to inspect the surrounding guides. A buyer quoting HD02008-117 should confirm separate clip requirements for the HONDA City 2015 order.

For application-specific sourcing with 71107-T9J-T50 on the City 2015: review facelift styling. The HD02008-117 sample for the left side should check the adjoining gap. For HONDA identification, 71107-T9J-T50 also requires technicians to check adjacent panel gaps. A buyer quoting HD02008-117 should request supported carton packing for the HONDA City 2015 order.

When the bumper opening is reviewed with 71107-T9J-T50 on the City 2015: review the bezel orientation. The HD02008-117 sample for the left side should measure the original length. For HONDA identification, 71107-T9J-T50 also requires technicians to inspect the surrounding guides. A buyer quoting HD02008-117 should state the target vehicle for the HONDA City 2015 order.

A trim-level comparison requires with 71107-T9J-T50 on the City 2015: check the vehicle build date. The HD02008-117 sample for the left side should inspect reinforcement ribs. For HONDA identification, 71107-T9J-T50 also requires technicians to check lamp-to-bezel clearance. A buyer quoting HD02008-117 should retain the product label for the HONDA City 2015 order.

Installation Guidance

During comparison with the original lamp surround, transfer reusable clips carefully, inspect the surrounding guides, and retain the removed bezel for comparison. While checking adjacent body parts, support the bumper cover evenly, protect exposed panel edges, and inspect damaged mounting points.

For replacement in the left front area, inspect each screw point, check lamp-to-bezel clearance, and retain the removed bezel for comparison. Before clips or hardware are transferred, avoid bending moulded tabs, confirm every locator engages, and check adjacent panel gaps.

When separating nearby City variants, review the completed alignment, trial-fit the bezel without force, and retain the removed bezel for comparison. During the physical comparison, confirm an evenly seated fit, protect nearby painted surfaces, and avoid bending moulded tabs.

Product Technical Specifications

Wholesale Supply and Packing

During an OE-led review for HD02008-117, state annual purchasing volume, confirm separate clip requirements, and confirm sample requirements. Before packing the confirmed item, support the bezel during transit, confirm the required finish, and provide the delivery country.

For wholesale selection of 71107-T9J-T50, state the required quantity, include the complete OE reference, and protect projecting locator tabs. For a no-force trial fit, retain the product label, review carton edge protection, and check the ordered mounting side.

Before sourcing this front left fog light bezel, protect projecting locator tabs, state the destination port, and confirm sample requirements. While checking adjacent body parts, provide the delivery country, compare the supplied photographs, and request supported carton packing.

Frequently Asked Questions

What details should accompany a 71107-T9J-T50 quotation request?

Send the complete OE reference, vehicle information, mounting side, original-part photographs, quantity and destination so the application can be reviewed. For City, match the locating-slot layout, inspect the moulded face, check the final perimeter, and confirm sample requirements before installation or quotation.

Why must the left and right versions of 71107-T9J-T50 be distinguished?

Left and right bezels are normally mirror-specific. Their curves, screw points and locator tabs should not be assumed interchangeable. For City, review the bezel orientation, review the outer-edge shape, confirm the fitting direction, and support the bezel during transit before installation or quotation.

Is workshop installation recommended for 71107-T9J-T50?

Yes. A workshop can inspect damaged bumper mounts on the City, align the lamp opening and avoid forcing a bezel intended for another trim level. For City, match the outer contour, review nearby cover openings, retain the removed bezel for comparison, and confirm the required finish before installation or quotation.

Are mounting clips supplied with 71107-T9J-T50?

The supply scope follows the product photographs. Reusable clips, screws or separate brackets should be confirmed before the order is finalized. For City, check the nearby lamp opening, measure the original length, check adjacent panel gaps, and provide the delivery country before installation or quotation.

Does 71107-T9J-T50 include the complete lamp assembly?

No. This listing covers the pictured front left fog light bezel. The fog lamp, bulbs, wiring, switches and separate clips are not included unless they are visibly shown. For City, verify the mounting side, review narrow bezel ends, align the lamp opening first, and confirm the delivery schedule before installation or quotation.

Request a Quote

Send the complete OE reference 71107-T9J-T50, vehicle details, mounting side, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.