71191-3K0-H01 Front Left Fog Light Bezel for HONDA Integra 2022

71191-3K0-H01 Front Left Fog Light Bezel Product Overview

This product page presents 71191-3K0-H01 for buyers comparing a front left fog light bezel for HONDA Integra 2022. Check the left orientation, lamp opening, mounting tabs against the original component.

Fitment and Application for Integra

For HONDA Integra 2022, compare the full OE marking, inspect the lamp aperture size, and confirm the vehicle market. Before packing the confirmed item, compare the installation direction, match the locating-slot layout, and check adjacent bumper parts.

When preparing a Integra bumper repair, compare every fixing tab, review facelift styling, and compare the original grille section. For a no-force trial fit, check adjacent bumper parts, confirm the vehicle market, and confirm the model year.

During comparison with the original lamp surround, compare the original grille section, inspect the removed bezel, and confirm the vehicle market. While checking adjacent body parts, check the vehicle build date, verify the mounting side, and compare the installation direction.

Front Left Fog Light Bezel Design and Replacement Notes

For the listed 2022 application, inspect the moulded face, compare the original edge profile, and review locator direction. During receiving inspection, check the bezel curvature, compare the centre alignment, and inspect the end geometry.

Before the removed bezel is discarded, review fastening slots, check the lamp interface, and review locator direction. Before the quotation is confirmed, check the adjoining gap, confirm decorative finish details, and check the bumper transition.

During an OE-led review for HD02008-072, compare transferred hardware, inspect reinforcement ribs, and review fastening slots. Before packing the confirmed item, check the bezel curvature, inspect the moulded face, and review the outer-edge shape.

Application-Specific Identification Notes

A trim-level comparison requires with 71191-3K0-H01 on the Integra 2022: check the nearby lamp opening. The HD02008-072 sample for the left side should check the adjoining gap. For HONDA identification, 71191-3K0-H01 also requires technicians to check lamp-to-bezel clearance. A buyer quoting HD02008-072 should state the target vehicle for the HONDA Integra 2022 order.

For application-specific sourcing with 71191-3K0-H01 on the Integra 2022: confirm the vehicle market. The HD02008-072 sample for the left side should inspect the moulded face. For HONDA identification, 71191-3K0-H01 also requires technicians to protect nearby painted surfaces. A buyer quoting HD02008-072 should protect projecting locator tabs for the HONDA Integra 2022 order.

A vehicle-side comparison starts with 71191-3K0-H01 on the Integra 2022: review market-version differences. The HD02008-072 sample for the left side should inspect the end geometry. For HONDA identification, 71191-3K0-H01 also requires technicians to confirm an evenly seated fit. A buyer quoting HD02008-072 should check the ordered mounting side for the HONDA Integra 2022 order.

Before workshop installation with 71191-3K0-H01 on the Integra 2022: match the stated trim level. The HD02008-072 sample for the left side should compare the centre alignment. For HONDA identification, 71191-3K0-H01 also requires technicians to inspect each screw point. A buyer quoting HD02008-072 should state annual purchasing volume for the HONDA Integra 2022 order.

Installation Guidance

For HONDA Integra 2022, retain the removed bezel for comparison, confirm an evenly seated fit, and protect nearby painted surfaces. While reviewing the supplied photographs, avoid bending moulded tabs, check the final perimeter, and support the bumper cover evenly.

When preparing a Integra bumper repair, check the final perimeter, check lamp-to-bezel clearance, and transfer reusable clips carefully. Before final installation, support the bumper cover evenly, review the completed alignment, and confirm the fitting direction.

During comparison with the original lamp surround, clean the bumper mounting area, support the bumper cover evenly, and protect nearby painted surfaces. During receiving inspection, trial-fit the bezel without force, align the lamp opening first, and inspect damaged mounting points.

Product Technical Specifications

Wholesale Supply and Packing

For the listed 2022 application, confirm the delivery schedule, state the target vehicle, and send photographs of the removed part. At the workshop preparation stage, check the ordered mounting side, protect projecting locator tabs, and state the destination port.

Before the removed bezel is discarded, confirm the required finish, include the complete OE reference, and send photographs of the removed part. For a repeat wholesale order, provide the delivery country, state the required quantity, and request protective inner wrapping.

During an OE-led review for HD02008-072, confirm sample requirements, request export quotation terms, and send photographs of the removed part. While reviewing the supplied photographs, retain the product label, state annual purchasing volume, and provide the delivery country.

Frequently Asked Questions

Are mounting clips supplied with 71191-3K0-H01?

The supply scope follows the product photographs. Reusable clips, screws or separate brackets should be confirmed before the order is finalized. For Integra, inspect the removed bezel, check the adjoining gap, check lamp-to-bezel clearance, and state the target vehicle before installation or quotation.

Does 71191-3K0-H01 include the complete lamp assembly?

No. This listing covers the pictured front left fog light bezel. The fog lamp, bulbs, wiring, switches and separate clips are not included unless they are visibly shown. For Integra, review market-version differences, check the adjoining gap, check lamp-to-bezel clearance, and state the target vehicle before installation or quotation.

How should 71191-3K0-H01 be protected for export?

The bezel should be supported inside the carton with its narrow edges, lamp opening and projecting tabs protected against compression, abrasion and impact. For Integra, confirm the model year, check the adjoining gap, check lamp-to-bezel clearance, and state the target vehicle before installation or quotation.

What vehicle application is listed for 71191-3K0-H01?

71191-3K0-H01 is presented for HONDA Integra 2022. Confirm the full OE reference, model year, trim version and installation side against the removed part before ordering. For Integra, inspect the lamp aperture size, check the adjoining gap, check lamp-to-bezel clearance, and state the target vehicle before installation or quotation.

Can photographs alone confirm 71191-3K0-H01 fitment?

Photographs help with shape and finish comparison, but the OE number, vehicle year, side, trim specification and mounting geometry should also agree. For Integra, compare the installation direction, check the adjoining gap, check lamp-to-bezel clearance, and state the target vehicle before installation or quotation.

Request a Quote

Send the complete OE reference 71191-3K0-H01, vehicle details, mounting side, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.