71118-TGG-H01 Front Left Fog Light Bezel for HONDA Civic 2021

71118-TGG-H01 Front Left Fog Light Bezel Product Overview

The product shown under 71118-TGG-H01 is a front left fog light bezel intended for HONDA Civic 2021. Check the left orientation, lamp opening, mounting tabs against the original component.

Fitment and Application for Civic

When separating nearby Civic variants, compare the original grille section, inspect the lamp aperture size, and compare every fixing tab. Before packing the confirmed item, review the bezel orientation, compare the full OE marking, and check the nearby lamp opening.

When comparing 71118-TGG-H01 with the removed bezel, confirm the vehicle market, check adjacent bumper parts, and compare the original grille section. For a no-force trial fit, review facelift styling, compare every fixing tab, and review market-version differences.

For the listed 2021 application, verify the mounting side, inspect the removed bezel, and compare every fixing tab. While checking adjacent body parts, check the nearby lamp opening, confirm the bumper position, and review facelift styling.

Front Left Fog Light Bezel Design and Replacement Notes

Before sourcing this front left fog light bezel, review nearby cover openings, check the bumper transition, and confirm decorative finish details. During receiving inspection, check the adjoining gap, review locator direction, and check the lamp interface.

Before confirming this fog light bezel, inspect the moulded face, compare vent or grille openings, and confirm decorative finish details. Before the quotation is confirmed, review the outer-edge shape, inspect the frame width, and compare mounting-hole height.

For HONDA Civic 2021, review fastening slots, measure the original length, and confirm decorative finish details. Before packing the confirmed item, inspect the end geometry, compare transferred hardware, and review the outer-edge shape.

Application-Specific Identification Notes

Before workshop installation with 71118-TGG-H01 on the Civic 2021: review market-version differences. The HD02008-068 sample for the left side should check the bezel curvature. For HONDA identification, 71118-TGG-H01 also requires technicians to inspect the surrounding guides. A buyer quoting HD02008-068 should confirm separate clip requirements for the HONDA Civic 2021 order.

For application-specific sourcing with 71118-TGG-H01 on the Civic 2021: match the locating-slot layout. The HD02008-068 sample for the left side should inspect the moulded face. For HONDA identification, 71118-TGG-H01 also requires technicians to review the completed alignment. A buyer quoting HD02008-068 should state annual purchasing volume for the HONDA Civic 2021 order.

Before workshop installation with 71118-TGG-H01 on the Civic 2021: review market-version differences. The HD02008-068 sample for the left side should measure the original length. For HONDA identification, 71118-TGG-H01 also requires technicians to inspect the surrounding guides. A buyer quoting HD02008-068 should state the target vehicle for the HONDA Civic 2021 order.

For application-specific sourcing with 71118-TGG-H01 on the Civic 2021: verify the mounting side. The HD02008-068 sample for the left side should confirm decorative finish details. For HONDA identification, 71118-TGG-H01 also requires technicians to clean the bumper mounting area. A buyer quoting HD02008-068 should confirm the delivery schedule for the HONDA Civic 2021 order.

Installation Guidance

When separating nearby Civic variants, align the lamp opening first, support the bumper cover evenly, and confirm the finished bumper gap. While reviewing the supplied photographs, confirm an evenly seated fit, protect exposed panel edges, and check lamp-to-bezel clearance.

When comparing 71118-TGG-H01 with the removed bezel, retain the removed bezel for comparison, confirm the fitting direction, and check the final perimeter. Before final installation, inspect the surrounding guides, clean the bumper mounting area, and trial-fit the bezel without force.

For the listed 2021 application, check the final perimeter, check adjacent panel gaps, and confirm the finished bumper gap. During receiving inspection, check lamp-to-bezel clearance, protect nearby painted surfaces, and review separate hardware needs.

Product Technical Specifications

Wholesale Supply and Packing

Before sourcing this front left fog light bezel, compare the supplied photographs, check the ordered mounting side, and state annual purchasing volume. At the workshop preparation stage, request export quotation terms, confirm the packing method, and state the destination port.

Before confirming this fog light bezel, confirm the delivery schedule, support the bezel during transit, and state annual purchasing volume. For a repeat wholesale order, include the complete OE reference, review carton edge protection, and request protective inner wrapping.

For HONDA Civic 2021, confirm the required finish, provide the delivery country, and confirm the delivery schedule. While reviewing the supplied photographs, request export quotation terms, compare the supplied photographs, and state the target vehicle.

Frequently Asked Questions

Why must the left and right versions of 71118-TGG-H01 be distinguished?

Left and right bezels are normally mirror-specific. Their curves, screw points and locator tabs should not be assumed interchangeable. For Civic, review market-version differences, check the adjoining gap, inspect damaged mounting points, and request protective inner wrapping before installation or quotation.

Is workshop installation recommended for 71118-TGG-H01?

Yes. A workshop can inspect damaged bumper mounts on the Civic, align the lamp opening and avoid forcing a bezel intended for another trim level. For Civic, review market-version differences, review the outer-edge shape, confirm the fitting direction, and support the bezel during transit before installation or quotation.

Are mounting clips supplied with 71118-TGG-H01?

The supply scope follows the product photographs. Reusable clips, screws or separate brackets should be confirmed before the order is finalized. For Civic, review market-version differences, inspect the end geometry, verify the lamp remains centred, and check the ordered mounting side before installation or quotation.

Does 71118-TGG-H01 include the complete lamp assembly?

No. This listing covers the pictured front left fog light bezel. The fog lamp, bulbs, wiring, switches and separate clips are not included unless they are visibly shown. For Civic, review market-version differences, measure the original length, check adjacent panel gaps, and provide the delivery country before installation or quotation.

How should 71118-TGG-H01 be protected for export?

The bezel should be supported inside the carton with its narrow edges, lamp opening and projecting tabs protected against compression, abrasion and impact. For Civic, review market-version differences, compare vent or grille openings, review separate hardware needs, and retain the product label before installation or quotation.

Request a Quote

Send the complete OE reference 71118-TGG-H01, vehicle details, mounting side, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.