71373-TBX-H01 Front Right Fog Light Bezel for HONDA Inspire 2019

71373-TBX-H01 Front Right Fog Light Bezel Product Overview

This listing covers 71373-TBX-H01, a front right fog light bezel associated with HONDA Inspire 2019. Check the right orientation, lamp opening, mounting tabs and inner-position specification against the original component.

Fitment and Application for Inspire

For HONDA Inspire 2019, match the locating-slot layout, review market-version differences, and match the outer contour. Before packing the confirmed item, compare the installation direction, verify the mounting side, and check the vehicle build date.

When preparing a Inspire bumper repair, match the stated trim level, inspect the lamp aperture size, and match the locating-slot layout. For a no-force trial fit, review the bezel orientation, match the outer contour, and check the nearby lamp opening.

During comparison with the original lamp surround, confirm the bumper position, review facelift styling, and match the outer contour. While checking adjacent body parts, check the vehicle build date, compare the original grille section, and review the bezel orientation.

Front Right Fog Light Bezel Design and Replacement Notes

For the listed 2019 application, compare the centre alignment, compare mounting-hole height, and compare the surface texture. During receiving inspection, compare vent or grille openings, compare transferred hardware, and check the bezel curvature.

Before the removed bezel is discarded, review narrow bezel ends, inspect reinforcement ribs, and compare the surface texture. Before the quotation is confirmed, check the bumper transition, review fastening slots, and inspect the end geometry.

During an OE-led review for HD02008-022, review nearby cover openings, compare the original edge profile, and compare the surface texture. Before packing the confirmed item, check the lamp interface, inspect the moulded face, and check the bumper transition.

Application-Specific Identification Notes

For application-specific sourcing with 71373-TBX-H01 on the Inspire 2019: review market-version differences. The HD02008-022 sample for the right side should check the lamp interface. For HONDA identification, 71373-TBX-H01 also requires technicians to check adjacent panel gaps. A buyer quoting HD02008-022 should request protective inner wrapping for the HONDA Inspire 2019 order.

For application-specific sourcing with 71373-TBX-H01 on the Inspire 2019: match the locating-slot layout. The HD02008-022 sample for the right side should inspect the moulded face. For HONDA identification, 71373-TBX-H01 also requires technicians to check the final perimeter. A buyer quoting HD02008-022 should review carton edge protection for the HONDA Inspire 2019 order.

For application-specific sourcing with 71373-TBX-H01 on the Inspire 2019: review market-version differences. The HD02008-022 sample for the right side should compare the original edge profile. For HONDA identification, 71373-TBX-H01 also requires technicians to inspect damaged mounting points. A buyer quoting HD02008-022 should request export quotation terms for the HONDA Inspire 2019 order.

For application-specific sourcing with 71373-TBX-H01 on the Inspire 2019: verify the mounting side. The HD02008-022 sample for the right side should inspect the frame width. For HONDA identification, 71373-TBX-H01 also requires technicians to review the completed alignment. A buyer quoting HD02008-022 should compare the supplied photographs for the HONDA Inspire 2019 order.

Installation Guidance

For HONDA Inspire 2019, protect exposed panel edges, check lamp-to-bezel clearance, and confirm every locator engages. While reviewing the supplied photographs, inspect damaged mounting points, protect nearby painted surfaces, and verify the lamp remains centred.

When preparing a Inspire bumper repair, confirm the finished bumper gap, support the bumper cover evenly, and align the lamp opening first. Before final installation, check adjacent panel gaps, retain the removed bezel for comparison, and confirm the fitting direction.

During comparison with the original lamp surround, align the lamp opening first, confirm an evenly seated fit, and confirm every locator engages. During receiving inspection, verify the lamp remains centred, inspect each screw point, and trial-fit the bezel without force.

Product Technical Specifications

Wholesale Supply and Packing

For the listed 2019 application, send photographs of the removed part, include the complete OE reference, and confirm the required finish. At the workshop preparation stage, request supported carton packing, protect projecting locator tabs, and support the bezel during transit.

Before the removed bezel is discarded, inspect receiving condition, request export quotation terms, and confirm the required finish. For a repeat wholesale order, confirm separate clip requirements, state the required quantity, and retain the product label.

During an OE-led review for HD02008-022, compare the supplied photographs, state the target vehicle, and inspect receiving condition. While reviewing the supplied photographs, request supported carton packing, send photographs of the removed part, and request protective inner wrapping.

Frequently Asked Questions

Where is 71373-TBX-H01 installed?

The listed front right fog light bezel belongs in the right front bumper area. An opposite-side or different-trim bezel may use another outline and tab arrangement. For Inspire, review market-version differences, check the adjoining gap, trial-fit the bezel without force, and request export quotation terms before installation or quotation.

What details should accompany a 71373-TBX-H01 quotation request?

Send the complete OE reference, vehicle information, mounting side, original-part photographs, quantity and destination so the application can be reviewed. For Inspire, review market-version differences, check the bumper transition, verify the lamp remains centred, and confirm separate clip requirements before installation or quotation.

Why must the left and right versions of 71373-TBX-H01 be distinguished?

Left and right bezels are normally mirror-specific. Their curves, screw points and locator tabs should not be assumed interchangeable. For Inspire, review market-version differences, check the bezel curvature, confirm an evenly seated fit, and retain the product label before installation or quotation.

Is workshop installation recommended for 71373-TBX-H01?

Yes. A workshop can inspect damaged bumper mounts on the Inspire, align the lamp opening and avoid forcing a bezel intended for another trim level. For Inspire, review market-version differences, compare vent or grille openings, confirm the fitting direction, and request supported carton packing before installation or quotation.

Are mounting clips supplied with 71373-TBX-H01?

The supply scope follows the product photographs. Reusable clips, screws or separate brackets should be confirmed before the order is finalized. For Inspire, review market-version differences, compare mounting-hole height, avoid bending moulded tabs, and provide the delivery country before installation or quotation.

Request a Quote

Send the complete OE reference 71373-TBX-H01, vehicle details, mounting side, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.