71108-T6L-H02 Front Left Fog Light Bezel for HONDA Spirior 2015

71108-T6L-H02 Front Left Fog Light Bezel Product Overview

This listing covers 71108-T6L-H02, a front left fog light bezel associated with HONDA Spirior 2015. Check the left orientation, lamp opening, mounting tabs and high-specification specification against the original component.

Fitment and Application for Spirior

For replacement in the left front area, review the bezel orientation, match the locating-slot layout, and inspect the lamp aperture size. Before clips or hardware are transferred, match the stated trim level, inspect the removed bezel, and confirm the bumper position.

When separating nearby Spirior variants, inspect the lamp aperture size, compare the original grille section, and inspect the removed bezel. During the physical comparison, confirm the vehicle market, check the vehicle build date, and verify the mounting side.

When comparing 71108-T6L-H02 with the removed bezel, inspect the removed bezel, compare every fixing tab, and check the nearby lamp opening. When checking the bumper opening, confirm the bumper position, review facelift styling, and match the outer contour.

Front Left Fog Light Bezel Design and Replacement Notes

For wholesale selection of 71108-T6L-H02, check the bumper transition, review nearby cover openings, and check the bezel curvature. For a no-force trial fit, compare transferred hardware, compare vent or grille openings, and compare the surface texture.

Before sourcing this front left fog light bezel, measure the original length, review narrow bezel ends, and check the bumper transition. While checking adjacent body parts, compare the centre alignment, compare the original edge profile, and confirm decorative finish details.

Before confirming this fog light bezel, review the outer-edge shape, inspect the moulded face, and check the bezel curvature. Before clips or hardware are transferred, review fastening slots, inspect reinforcement ribs, and compare transferred hardware.

Application-Specific Identification Notes

A vehicle-side comparison starts with 71108-T6L-H02 on the Spirior 2015: check adjacent bumper parts. The HD02008-047 sample for the left side should inspect reinforcement ribs. For HONDA identification, 71108-T6L-H02 also requires technicians to confirm the fitting direction. A buyer quoting HD02008-047 should request export quotation terms for the HONDA Spirior 2015 order.

For application-specific sourcing with 71108-T6L-H02 on the Spirior 2015: match the stated trim level. The HD02008-047 sample for the left side should inspect the moulded face. For HONDA identification, 71108-T6L-H02 also requires technicians to transfer reusable clips carefully. A buyer quoting HD02008-047 should compare the supplied photographs for the HONDA Spirior 2015 order.

A trim-level comparison requires with 71108-T6L-H02 on the Spirior 2015: review market-version differences. The HD02008-047 sample for the left side should check the bumper transition. For HONDA identification, 71108-T6L-H02 also requires technicians to support the bumper cover evenly. A buyer quoting HD02008-047 should include the complete OE reference for the HONDA Spirior 2015 order.

Before workshop installation with 71108-T6L-H02 on the Spirior 2015: confirm the vehicle market. The HD02008-047 sample for the left side should compare the surface texture. For HONDA identification, 71108-T6L-H02 also requires technicians to confirm the finished bumper gap. A buyer quoting HD02008-047 should protect projecting locator tabs for the HONDA Spirior 2015 order.

Installation Guidance

For replacement in the left front area, confirm an evenly seated fit, inspect each screw point, and check adjacent panel gaps. Before the quotation is confirmed, protect nearby painted surfaces, inspect the surrounding guides, and protect exposed panel edges.

When separating nearby Spirior variants, support the bumper cover evenly, protect nearby painted surfaces, and trial-fit the bezel without force. Before packing the confirmed item, align the lamp opening first, inspect damaged mounting points, and transfer reusable clips carefully.

When comparing 71108-T6L-H02 with the removed bezel, check adjacent panel gaps, check the final perimeter, and trial-fit the bezel without force. For a no-force trial fit, inspect each screw point, verify the lamp remains centred, and confirm every locator engages.

Product Technical Specifications

Wholesale Supply and Packing

For wholesale selection of 71108-T6L-H02, request supported carton packing, confirm the required finish, and include the complete OE reference. Before final installation, send photographs of the removed part, provide the delivery country, and state the required quantity.

Before sourcing this front left fog light bezel, state the target vehicle, confirm the packing method, and include the complete OE reference. During receiving inspection, confirm sample requirements, request export quotation terms, and send photographs of the removed part.

Before confirming this fog light bezel, request export quotation terms, review carton edge protection, and support the bezel during transit. Before the quotation is confirmed, send photographs of the removed part, state the destination port, and compare the supplied photographs.

Frequently Asked Questions

How should 71108-T6L-H02 be protected for export?

The bezel should be supported inside the carton with its narrow edges, lamp opening and projecting tabs protected against compression, abrasion and impact. For Spirior, review facelift styling, check the adjoining gap, review separate hardware needs, and state the destination port before installation or quotation.

What vehicle application is listed for 71108-T6L-H02?

71108-T6L-H02 is presented for HONDA Spirior 2015. Confirm the full OE reference, model year, trim version and installation side against the removed part before ordering. For Spirior, review market-version differences, measure the original length, confirm an evenly seated fit, and request protective inner wrapping before installation or quotation.

Can photographs alone confirm 71108-T6L-H02 fitment?

Photographs help with shape and finish comparison, but the OE number, vehicle year, side, trim specification and mounting geometry should also agree. For Spirior, compare the installation direction, check the lamp interface, inspect the surrounding guides, and provide the delivery country before installation or quotation.

Does trim specification matter for 71108-T6L-H02?

Yes. high-specification can change the opening pattern, finish and locator positions, so compare the removed bezel and bumper before purchase. For Spirior, check the vehicle build date, compare mounting-hole height, verify the lamp remains centred, and include the complete OE reference before installation or quotation.

How should 71108-T6L-H02 be compared before installation?

Compare the complete OE number, outer contour, lamp opening, locating tabs, screw points and surface finish with the removed component before tightening hardware. For Spirior, inspect the removed bezel, review the outer-edge shape, support the bumper cover evenly, and request supported carton packing before installation or quotation.

Request a Quote

Send the complete OE reference 71108-T6L-H02, vehicle details, mounting side, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.