71108-TL0-G00 Front Left Fog Light Bezel for HONDA Spirior 2009

71108-TL0-G00 Front Left Fog Light Bezel Product Overview

This product page presents 71108-TL0-G00 for buyers comparing a front left fog light bezel for HONDA Spirior 2009. Check the left orientation, lamp opening, mounting tabs against the original component.

Fitment and Application for Spirior

Before confirming this fog light bezel, compare the installation direction, compare the full OE marking, and review market-version differences. Before clips or hardware are transferred, compare every fixing tab, review facelift styling, and compare the original grille section.

For HONDA Spirior 2009, review market-version differences, match the locating-slot layout, and review facelift styling. During the physical comparison, match the stated trim level, check adjacent bumper parts, and confirm the bumper position.

When preparing a Spirior bumper repair, review facelift styling, match the outer contour, and check the vehicle build date. When checking the bumper opening, compare the original grille section, review the bezel orientation, and confirm the surface finish.

Front Left Fog Light Bezel Design and Replacement Notes

When comparing 71108-TL0-G00 with the removed bezel, compare mounting-hole height, compare the centre alignment, and measure the original length. For a no-force trial fit, inspect the moulded face, inspect reinforcement ribs, and inspect the frame width.

For the listed 2009 application, compare the original edge profile, confirm decorative finish details, and compare mounting-hole height. While checking adjacent body parts, inspect the back-side structure, check the adjoining gap, and compare the surface texture.

Before the removed bezel is discarded, check the bumper transition, review narrow bezel ends, and measure the original length. Before clips or hardware are transferred, review nearby cover openings, review the outer-edge shape, and inspect the moulded face.

Application-Specific Identification Notes

A trim-level comparison requires with 71108-TL0-G00 on the Spirior 2009: review market-version differences. The HD02008-043 sample for the left side should compare the original edge profile. For HONDA identification, 71108-TL0-G00 also requires technicians to verify the lamp remains centred. A buyer quoting HD02008-043 should state the destination port for the HONDA Spirior 2009 order.

For application-specific sourcing with 71108-TL0-G00 on the Spirior 2009: compare every fixing tab. The HD02008-043 sample for the left side should inspect the moulded face. For HONDA identification, 71108-TL0-G00 also requires technicians to clean the bumper mounting area. A buyer quoting HD02008-043 should send photographs of the removed part for the HONDA Spirior 2009 order.

A vehicle-side comparison starts with 71108-TL0-G00 on the Spirior 2009: review market-version differences. The HD02008-043 sample for the left side should check the lamp interface. For HONDA identification, 71108-TL0-G00 also requires technicians to trial-fit the bezel without force. A buyer quoting HD02008-043 should request protective inner wrapping for the HONDA Spirior 2009 order.

Before workshop installation with 71108-TL0-G00 on the Spirior 2009: confirm the surface finish. The HD02008-043 sample for the left side should review locator direction. For HONDA identification, 71108-TL0-G00 also requires technicians to confirm every locator engages. A buyer quoting HD02008-043 should confirm sample requirements for the HONDA Spirior 2009 order.

Installation Guidance

Before confirming this fog light bezel, inspect damaged mounting points, clean the bumper mounting area, and confirm an evenly seated fit. Before the quotation is confirmed, inspect each screw point, check adjacent panel gaps, and protect nearby painted surfaces.

For HONDA Spirior 2009, check lamp-to-bezel clearance, inspect each screw point, and confirm the fitting direction. Before packing the confirmed item, protect exposed panel edges, review separate hardware needs, and check the final perimeter.

When preparing a Spirior bumper repair, confirm an evenly seated fit, align the lamp opening first, and confirm the fitting direction. For a no-force trial fit, clean the bumper mounting area, avoid bending moulded tabs, and review the completed alignment.

Product Technical Specifications

Wholesale Supply and Packing

When comparing 71108-TL0-G00 with the removed bezel, check the ordered mounting side, compare the supplied photographs, and confirm separate clip requirements. Before final installation, review carton edge protection, state the target vehicle, and confirm sample requirements.

For the listed 2009 application, request protective inner wrapping, protect projecting locator tabs, and confirm separate clip requirements. During receiving inspection, confirm the delivery schedule, request supported carton packing, and review carton edge protection.

Before the removed bezel is discarded, request supported carton packing, state the required quantity, and request export quotation terms. Before the quotation is confirmed, review carton edge protection, support the bezel during transit, and send photographs of the removed part.

Frequently Asked Questions

How should 71108-TL0-G00 be compared before installation?

Compare the complete OE number, outer contour, lamp opening, locating tabs, screw points and surface finish with the removed component before tightening hardware. For Spirior, review the bezel orientation, check the adjoining gap, avoid bending moulded tabs, and support the bezel during transit before installation or quotation.

What should be inspected when 71108-TL0-G00 arrives?

Check the label, contour, surface finish, lamp aperture, tabs, mounting points and carton condition before installation or disposal of the packaging. For Spirior, review market-version differences, compare vent or grille openings, inspect the surrounding guides, and request export quotation terms before installation or quotation.

Where is 71108-TL0-G00 installed?

The listed front left fog light bezel belongs in the left front bumper area. An opposite-side or different-trim bezel may use another outline and tab arrangement. For Spirior, review the bezel orientation, inspect reinforcement ribs, check adjacent panel gaps, and request supported carton packing before installation or quotation.

What details should accompany a 71108-TL0-G00 quotation request?

Send the complete OE reference, vehicle information, mounting side, original-part photographs, quantity and destination so the application can be reviewed. For Spirior, review market-version differences, review the outer-edge shape, confirm an evenly seated fit, and check the ordered mounting side before installation or quotation.

Why must the left and right versions of 71108-TL0-G00 be distinguished?

Left and right bezels are normally mirror-specific. Their curves, screw points and locator tabs should not be assumed interchangeable. For Spirior, review the bezel orientation, check the bumper transition, inspect damaged mounting points, and include the complete OE reference before installation or quotation.

Request a Quote

Send the complete OE reference 71108-TL0-G00, vehicle details, mounting side, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.