71193-SEL-T11 Front Right Bumper Bracket for HONDA City 2007

71193-SEL-T11 Front Right Bumper Bracket Product Overview

This page presents OE reference 71193-SEL-T11 as a front right bumper bracket for HONDA City 2007. Compare the original bracket, mounting holes and right orientation before ordering.

Fitment and Application for City

During an OE-led check for HD02007-081, compare every fixing point, review market-specific styling, and compare the removed support. Before packing the confirmed item, check adjacent body parts, confirm the vehicle market, and match the stated body style.

For wholesale selection of 71193-SEL-T11, compare the removed support, confirm the vehicle market, and inspect the original bracket. For a no-force trial fit, check the vehicle build date, compare the mounting direction, and verify the mounting side.

Before sourcing this front right bumper bracket, confirm the vehicle market, compare the complete OE number, and confirm the production year. While checking adjacent body parts, match the stated body style, review facelift differences, and verify the mounting side.

Front Right Bumper Bracket Design and Replacement Notes

During comparison with the original support, inspect the bracket width, check the bracket curvature, and review the surface texture. During receiving inspection, compare the original length, inspect the bracket width, and check the bracket curvature.

For replacement in the right front area, review the centre alignment, review transferred hardware, and examine the moulded surface. Before the quotation is confirmed, review the surface texture, review nearby cover openings, and review the centre alignment.

When separating nearby City variants, inspect narrow bracket ends, compare the original length, and review nearby cover openings. Before packing the confirmed item, review the outer-edge shape, inspect the locator direction, and compare the end geometry.

For a direct comparison of 71193-SEL-T11, confirm the material specification, compare the original edge profile, check lamp-cover clearance, and state the destination port. The bracket should match the original right front position before shipment.

Installation Guidance

During an OE-led check for HD02007-081, check lamp-cover clearance, review the completed alignment, and align the centre first. While reviewing the supplied photographs, check lamp-cover clearance, review the completed alignment, and align the centre first.

For wholesale selection of 71193-SEL-T11, confirm an even seated fit, inspect the surrounding guides, and clean the mounting area. Before final installation, protect nearby painted surfaces, align the centre first, and transfer reusable clips carefully.

Before sourcing this front right bumper bracket, protect nearby painted surfaces, check adjacent panel gaps, and inspect every screw point. During receiving inspection, confirm an even seated fit, support the bumper evenly, and transfer reusable clips carefully.

Product Technical Specifications

Wholesale Supply and Packing

During comparison with the original support, confirm the material requirement, request supported carton packing, and protect projecting locators. At the workshop preparation stage, support the bracket in transit, inspect the receiving condition, and retain the product label.

For replacement in the right front area, confirm sample requirements, compare the supplied photographs, and confirm the packing method. For a repeat wholesale order, state the required quantity, confirm the material requirement, and inspect the receiving condition.

When separating nearby City variants, state annual purchasing volume, provide the delivery country, and inspect the receiving condition. While reviewing the supplied photographs, check the ordered mounting side, state the required quantity, and support the bracket in transit.

Frequently Asked Questions

How should 71193-SEL-T11 be packed for export?

The bracket should be supported inside the carton, with tabs and projecting locators protected from impact, compression and abrasion. For City, confirm the vehicle market, inspect the fastening slots, inspect the surrounding guides, and protect projecting locators before installation or quotation.

Are mounting clips supplied with 71193-SEL-T11?

The supply scope follows the pictured product. Reusable clips or separate hardware should be confirmed before the order is finalized. For City, compare every fixing point, compare mounting-hole height, check lamp-cover clearance, and provide the delivery country before installation or quotation.

Where is 71193-SEL-T11 installed?

The stated installation is the right front bumper area. Opposite-side brackets can use different hole spacing and locator direction. For City, review the bracket orientation, review the surface texture, trial-fit without force, and confirm the packing method before installation or quotation.

How should 71193-SEL-T11 be checked before installation?

Compare overall shape, mounting holes, locating tabs, side orientation and the complete OE number with the removed part before tightening any fasteners. For City, confirm the production year, review the outer-edge shape, check the final perimeter, and confirm separate accessory needs before installation or quotation.

Can a photograph alone confirm 71193-SEL-T11 fitment?

A photograph is useful for shape comparison, but the OE number, vehicle application, year, side and mounting geometry should agree before purchase. For City, confirm the bumper position, inspect narrow bracket ends, confirm locator engagement, and inspect the receiving condition before installation or quotation.

Request a Quote

Send the complete OE reference 71193-SEL-T11, vehicle details, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.