76808-AQ900 Tailgate Molding Trim for TOYOTA Camry 2025 Left
Primary OE reference: 76808-AQ900
Cross-reference number 1: 76808-AQ900
Cross-reference number 2: 76808AQ900
Product: Tailgate Molding Trim
Vehicle: TOYOTA Camry 2025 (China-market version)
Installation area: Tailgate
Side / orientation: Left
Surface detail: verify against the original part
Internal item code: TY02005-034
Fitment note: confirm the surface specification; match the original clip spacing; check the vehicle build date before ordering 76808-AQ900
Product comparison: review transferred hardware; compare visible edge height; inspect the locator direction against the removed tailgate molding trim
Installation note: retain the removed component; review the completed alignment; inspect damaged mounting points on the Camry
Wholesale enquiry: confirm the packing method; retain the product label; confirm the surface requirement for TY02005-034
Application guidance: The stated application is TOYOTA Camry 2025 (China-market version), with tailgate placement and left orientation. Also inspect the original contour, inspect the back-side structure, check adjacent panel gaps, and confirm sample requirements.
76808-AQ900 Tailgate Molding Trim Product Overview
This application-led listing presents 76808-AQ900 as a tailgate molding trim for TOYOTA Camry 2025 (China-market version). Item TY02005-034 is intended for OE-number comparison rather than shape-only selection. The stated application includes the China-market version.
The stated application is TOYOTA Camry 2025 (China-market version), with tailgate placement and left orientation. Also inspect the original contour, inspect the back-side structure, check adjacent panel gaps, and confirm sample requirements.
Fitment and Application for Camry
For TOYOTA Camry 2025 (China-market version), match the bumper outline, compare the mounting direction, and inspect the original contour. Before packing the confirmed item, compare the removed trim, compare the complete OE number, and check nearby lamp openings.
When preparing a Camry exterior repair, match the original clip spacing, confirm the vehicle market, and confirm the production year. For a no-force trial fit, review facelift differences, inspect the original contour, and check nearby lamp openings.
During comparison with the original bumper trim, review facelift differences, confirm the installation position, and review the end profiles. While checking adjacent body parts, confirm the vehicle market, verify the mounting side, and review market-specific styling.
Tailgate Molding Trim Design and Replacement Notes
For the listed 2025 application, inspect the fastening slots, check the panel transition, and review the surface texture. During receiving inspection, compare gloss or plating, inspect narrow moulding ends, and check the adjoining gap.
Before the removed component is discarded, review transferred hardware, review nearby cover openings, and examine the visible finish. Before the quotation is confirmed, review the centre alignment, review the surface texture, and review transferred hardware.
During an OE-led check for TY02005-034, inspect the moulding width, compare the end termination, and review transferred hardware. Before packing the confirmed item, review the outer-edge shape, inspect the fastening slots, and compare the original length.
For a direct comparison of 76808-AQ900, check adjacent garnish pieces, check the bumper interface, check lamp-cover clearance, and check the ordered mounting side. The tailgate molding trim should match the original left tailgate profile before it is installed or released for shipment.
Installation Guidance
For TOYOTA Camry 2025 (China-market version), align the centre first, check adjacent panel gaps, and retain the removed component. While reviewing the supplied photographs, confirm the fitting direction, check the final perimeter, and inspect the surrounding guides.
When preparing a Camry exterior repair, retain the removed component, check the final perimeter, and support the trim evenly. Before final installation, check adjacent panel gaps, confirm the fitting direction, and inspect the surrounding guides.
During comparison with the original bumper trim, check the final perimeter, confirm an even seated fit, and review the completed alignment. During receiving inspection, inspect the surrounding guides, confirm the final trim gap, and clean the mounting channel.
Product Technical Specifications
| Product type | Tailgate Molding Trim |
|---|---|
| Primary OE reference | 76808-AQ900 |
| Cross-reference numbers | 76808-AQ900 76808AQ900 |
| Internal item code | TY02005-034 |
| Vehicle brand | TOYOTA |
| Vehicle model | Camry |
| Model year | 2025 |
| Installation area | Tailgate |
| Side / orientation | Left |
| Surface detail | verify against the original part |
| Applicable vehicle | TOYOTA Camry 2025 (China-market version) |
Wholesale Supply and Packing
For the listed 2025 application, confirm the surface requirement, retain the product label, and compare the supplied photographs. At the workshop preparation stage, state the destination port, send original-part photographs, and support the moulding length.
Before the removed component is discarded, confirm sample requirements, confirm the packing method, and confirm the surface requirement. For a repeat wholesale order, review carton edge protection, confirm the delivery schedule, and protect projecting locators.
During an OE-led check for TY02005-034, state annual purchasing volume, state the destination port, and state the required quantity. While reviewing the supplied photographs, include the complete OE number, protect projecting locators, and retain the product label.
Distributors sourcing 76808-AQ900 should keep TY02005-034 and the left position on every quotation revision. Sample confirmation, carton marking and repeat-order specification details should use the same part number chain.
Frequently Asked Questions
Does 76808-AQ900 have a fixed surface finish?
The source detail is verify against the original part. Colour, gloss, texture or plating should be verified against the original vehicle and an approved sample before production. For Camry, match the bumper outline, inspect the back-side structure, confirm the final trim gap, and protect projecting locators before installation or quotation.
Is a model name alone enough to order 76808-AQ900?
No. The Camry name is useful for discovery, but OE number 76808-AQ900, VIN or build data, side, finish and physical attachment points should agree. For Camry, compare the mounting direction, compare the end termination, inspect every screw point, and provide the delivery country before installation or quotation.
What should be inspected when 76808-AQ900 arrives?
Check the tailgate molding trim part number, overall straightness, edge condition, attachment points and visible surface before installation or disposal of packaging. For Camry, inspect the original contour, review nearby cover openings, align the centre first, and confirm the packing method before installation or quotation.
What information is needed for a 76808-AQ900 quotation?
Send TOYOTA Camry 2025 (China-market version) vehicle details, the complete OE number, original-part photos, required quantity and delivery destination for a product-specific review. For Camry, compare the removed trim, check the panel transition, confirm an even seated fit, and confirm separate accessory needs before installation or quotation.
How should 76808-AQ900 be packed for export?
Support the moulding length, shield projecting locators and prevent abrasion on the verify against the original part surface. Packaging confirmation is useful for repeat wholesale orders. For Camry, compare the complete OE number, inspect the moulding width, avoid bending long sections, and inspect the receiving condition before installation or quotation.
Request a Quote
Send the complete OE reference 76808-AQ900, vehicle details, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.
