71119-TKM-H51 Bumper Trim Molding for HONDA Elysion 2022 Left
Primary OE reference: 71119-TKM-H51
Cross-reference number 1: 71119-TKM-H51
Cross-reference number 2: 71119TKMH51
Product: Bumper Trim Molding
Vehicle: HONDA Elysion 2022
Installation area: Front
Side / orientation: Left
Surface detail: verify against the original part
Internal item code: HD02005-169
Fitment note: compare every attachment point; confirm the surface specification; compare the removed trim before ordering 71119-TKM-H51
Product comparison: review the surface texture; compare the original edge profile; inspect the back-side structure against the removed bumper trim molding
Installation note: inspect every screw point; avoid bending long sections; transfer reusable clips carefully on the Elysion
Wholesale enquiry: protect projecting locators; retain the product label; state the required quantity for HD02005-169
Application guidance: A correct HD02005-169 selection should follow the original contour, finish and clip direction. Also compare the complete OE number, inspect the back-side structure, protect painted panel edges, and confirm sample requirements.
71119-TKM-H51 Bumper Trim Molding Product Overview
For exterior line HD02005-169, the principal OE reference is 71119-TKM-H51. It is listed for HONDA Elysion 2022 and should be approved from the number, vehicle data and front mounting geometry together.
A correct HD02005-169 selection should follow the original contour, finish and clip direction. Also compare the complete OE number, inspect the back-side structure, protect painted panel edges, and confirm sample requirements.
Fitment and Application for Elysion
For a replacement on the left front area, verify the mounting side, match the bumper outline, and match the original clip spacing. Before clips or hardware are transferred, review facelift differences, review market-specific styling, and check adjacent garnish pieces.
When separating nearby Elysion trim variants, match the bumper outline, check the vehicle build date, and compare the removed trim. During the physical comparison, review the end profiles, confirm the surface specification, and check adjacent garnish pieces.
When comparing 71119-TKM-H51 with the removed part, match the original clip spacing, confirm the production year, and inspect the original contour. When checking the visible exterior face, review market-specific styling, review the end profiles, and compare the mounting direction.
Bumper Trim Molding Design and Replacement Notes
For wholesale selection of 71119-TKM-H51, check the moulding curvature, check the adjoining gap, and review the outer-edge shape. For a no-force trial fit, check the panel transition, check the bumper interface, and check the moulding curvature.
Before sourcing this bumper trim molding for Elysion, compare gloss or plating, review transferred hardware, and check the bumper interface. While checking adjacent body parts, inspect the moulding width, compare the original edge profile, and review the centre alignment.
Before confirming this verify against the original part bumper trim molding, check the bumper interface, compare the original edge profile, and check the panel transition. Before clips or hardware are transferred, compare the original length, review the outer-edge shape, and compare the end termination.
For a direct comparison of 71119-TKM-H51, review the end profiles, review the outer-edge shape, check adjacent panel gaps, and request protective inner packing. The bumper trim molding should match the original left front profile before it is installed or released for shipment.
Installation Guidance
For a replacement on the left front area, align the centre first, transfer reusable clips carefully, and confirm locator engagement. Before the quotation is confirmed, retain the removed component, inspect every screw point, and protect painted panel edges.
When separating nearby Elysion trim variants, retain the removed component, review separate hardware needs, and confirm the final trim gap. Before packing the confirmed item, align the centre first, avoid bending long sections, and protect painted panel edges.
When comparing 71119-TKM-H51 with the removed part, check the final perimeter, trial-fit without force, and check lamp-cover clearance. For a no-force trial fit, inspect the surrounding guides, transfer reusable clips carefully, and protect painted panel edges.
Product Technical Specifications
| Product type | Bumper Trim Molding |
|---|---|
| Primary OE reference | 71119-TKM-H51 |
| Cross-reference numbers | 71119-TKM-H51 71119TKMH51 |
| Internal item code | HD02005-169 |
| Vehicle brand | HONDA |
| Vehicle model | Elysion |
| Model year | 2022 |
| Installation area | Front |
| Side / orientation | Left |
| Surface detail | verify against the original part |
| Applicable vehicle | HONDA Elysion 2022 |
Wholesale Supply and Packing
For wholesale selection of 71119-TKM-H51, support the moulding length, state the target application, and check the ordered mounting side. Before final installation, state the destination port, provide the delivery country, and request supported carton packing.
Before sourcing this bumper trim molding for Elysion, confirm separate accessory needs, confirm the delivery schedule, and request supported carton packing. During receiving inspection, review carton edge protection, state the destination port, and confirm the surface requirement.
Before confirming this verify against the original part bumper trim molding, state the destination port, request protective inner packing, and provide the delivery country. Before the quotation is confirmed, include the complete OE number, request supported carton packing, and support the moulding length.
For repeat purchasing of 71119-TKM-H51, retain the approved Elysion sample under supplier code HD02005-169. specification details revision dates whenever the vehicle application, finish or packaging specification changes.
Frequently Asked Questions
What product does OE 71119-TKM-H51 identify?
71119-TKM-H51 is listed here as a bumper trim molding. It is not presented as a complete bumper assembly, and the buyer should compare the original component before ordering. For Elysion, review facelift differences, check the adjoining gap, inspect damaged mounting points, and request protective inner packing before installation or quotation.
How should the position of 71119-TKM-H51 be confirmed?
This listing specification details a left component for the front area. Compare the removed part, mounting direction and termination points before confirmation. For Elysion, match the bumper outline, inspect the locator direction, review the completed alignment, and state annual purchasing volume before installation or quotation.
Why should supplier code HD02005-169 stay on the enquiry?
HD02005-169 connects the 71119-TKM-H51 fitment review, quotation, sample and receiving specification details. Keeping it on every revision reduces the risk of mixing similar trim pieces. For Elysion, compare the mounting direction, compare the original length, retain the removed component, and state the target application before installation or quotation.
Can a photo alone verify 71119-TKM-H51?
A photograph helps compare outline and finish, but it cannot replace the OE number or vehicle vehicle details. Review 71119-TKM-H51 and HD02005-169 with the removed part dimensions. For Elysion, inspect the original contour, review the centre alignment, protect the visible surface, and protect projecting locators before installation or quotation.
Is professional installation recommended for 71119-TKM-H51?
Yes. A workshop can dry-fit HD02005-169, correct damaged mounting areas and avoid forcing clips into a mismatched body panel. For Elysion, compare the removed trim, check the bumper interface, review separate hardware needs, and provide the delivery country before installation or quotation.
Request a Quote
Send the complete OE reference 71119-TKM-H51, vehicle details, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.
