71155-TKM-H51 Bumper Trim Molding for HONDA Elysion 2022 Center
Primary OE reference: 71155-TKM-H51
Cross-reference number 1: 71155-TKM-H51
Cross-reference number 2: 71155TKMH51
Product: Bumper Trim Molding
Vehicle: HONDA Elysion 2022
Installation area: Front
Side / orientation: Center
Surface detail: verify against the original part
Internal item code: HD02005-168
Fitment note: inspect the original contour; review market-specific styling; inspect the original contour before ordering 71155-TKM-H51
Product comparison: compare the end termination; inspect the back-side structure; check the moulding curvature against the removed bumper trim molding
Installation note: check adjacent panel gaps; clean the mounting channel; protect painted panel edges on the Elysion
Wholesale enquiry: request protective inner packing; confirm the delivery schedule; request supported carton packing for HD02005-168
Application guidance: This bumper trim molding is intended for the center front position on Elysion. Also match the original clip spacing, compare gloss or plating, check adjacent panel gaps, and request protective inner packing.
71155-TKM-H51 Bumper Trim Molding Product Overview
Prepared for wholesale and replacement-part enquiries, 71155-TKM-H51 covers a bumper trim molding for HONDA Elysion 2022. Item HD02005-168 belongs in the front installation zone and should be matched by OE number, shape and mounting points.
This bumper trim molding is intended for the center front position on Elysion. Also match the original clip spacing, compare gloss or plating, check adjacent panel gaps, and request protective inner packing.
Fitment and Application for Elysion
Before sourcing this bumper trim molding for Elysion, match the original clip spacing, match the stated body style, and check nearby lamp openings. At the workshop preparation stage, compare the removed trim, compare the mounting direction, and review facelift differences.
Before confirming this verify against the original part bumper trim molding, review facelift differences, check the vehicle build date, and compare the complete OE number. For a repeat wholesale order, confirm the installation position, match the original clip spacing, and inspect the original contour.
For HONDA Elysion 2022, review market-specific styling, compare the removed trim, and check adjacent garnish pieces. While reviewing the supplied photographs, confirm the vehicle market, match the stated body style, and inspect the original contour.
Bumper Trim Molding Design and Replacement Notes
When separating nearby Elysion trim variants, review nearby cover openings, check the moulding curvature, and inspect narrow moulding ends. During the physical comparison, compare visible edge height, review the centre alignment, and check the adjoining gap.
When comparing 71155-TKM-H51 with the removed part, inspect the locator direction, review the centre alignment, and inspect the fastening slots. When checking the visible exterior face, review the surface texture, inspect narrow moulding ends, and review transferred hardware.
For the listed 2022 application, review the surface texture, compare the original length, and inspect the moulding width. At the workshop preparation stage, check the moulding curvature, review the surface texture, and compare the original length.
For a direct comparison of 71155-TKM-H51, confirm the installation position, review transferred hardware, confirm an even seated fit, and inspect the receiving condition. The bumper trim molding should match the original center front profile before it is installed or released for shipment.
Installation Guidance
Before sourcing this bumper trim molding for Elysion, review the completed alignment, inspect the surrounding guides, and confirm the final trim gap. While checking adjacent body parts, clean the mounting channel, support the trim evenly, and protect the visible surface.
Before confirming this verify against the original part bumper trim molding, trial-fit without force, check adjacent panel gaps, and check lamp-cover clearance. Before clips or hardware are transferred, review separate hardware needs, inspect the surrounding guides, and protect the visible surface.
For HONDA Elysion 2022, avoid bending long sections, check the final perimeter, and protect the visible surface. During the physical comparison, avoid bending long sections, check the final perimeter, and protect the visible surface.
Product Technical Specifications
| Product type | Bumper Trim Molding |
|---|---|
| Primary OE reference | 71155-TKM-H51 |
| Cross-reference numbers | 71155-TKM-H51 71155TKMH51 |
| Internal item code | HD02005-168 |
| Vehicle brand | HONDA |
| Vehicle model | Elysion |
| Model year | 2022 |
| Installation area | Front |
| Side / orientation | Center |
| Surface detail | verify against the original part |
| Applicable vehicle | HONDA Elysion 2022 |
Wholesale Supply and Packing
When separating nearby Elysion trim variants, state the required quantity, include the complete OE number, and protect projecting locators. Before packing the confirmed item, retain the product label, review carton edge protection, and check the ordered mounting side.
When comparing 71155-TKM-H51 with the removed part, protect projecting locators, review carton edge protection, and confirm the packing method. For a no-force trial fit, send original-part photographs, inspect the receiving condition, and compare the supplied photographs.
For the listed 2022 application, review carton edge protection, confirm separate accessory needs, and compare the supplied photographs. While checking adjacent body parts, check the ordered mounting side, state annual purchasing volume, and request export quotation terms.
A quotation request should state 71155-TKM-H51, HD02005-168, HONDA Elysion 2022, required quantity and destination. VIN data and original-part photographs allow the supplier to review the line before confirming commercial terms.
Frequently Asked Questions
What information is needed for a 71155-TKM-H51 quotation?
Send HONDA Elysion 2022 vehicle details, the complete OE number, original-part photos, required quantity and delivery destination for a product-specific review. For Elysion, compare the mounting direction, review the centre alignment, review separate hardware needs, and inspect the receiving condition before installation or quotation.
How should 71155-TKM-H51 be packed for export?
Support the moulding length, shield projecting locators and prevent abrasion on the verify against the original part surface. Packaging confirmation is useful for repeat wholesale orders. For Elysion, inspect the original contour, check the bumper interface, check adjacent panel gaps, and include the complete OE number before installation or quotation.
Which vehicle is 71155-TKM-H51 listed for?
The source application is HONDA Elysion 2022. VIN, production date, body style and market version should still be checked because exterior trim can change within one model line. For Elysion, compare the removed trim, inspect the fastening slots, confirm the final trim gap, and confirm the delivery schedule before installation or quotation.
Does 71155-TKM-H51 have a fixed surface finish?
The source detail is verify against the original part. Colour, gloss, texture or plating should be verified against the original vehicle and an approved sample before production. For Elysion, compare the complete OE number, compare visible edge height, inspect every screw point, and check the ordered mounting side before installation or quotation.
Is a model name alone enough to order 71155-TKM-H51?
No. The Elysion name is useful for discovery, but OE number 71155-TKM-H51, VIN or build data, side, finish and physical attachment points should agree. For Elysion, check nearby lamp openings, review the surface texture, align the centre first, and confirm sample requirements before installation or quotation.
Request a Quote
Send the complete OE reference 71155-TKM-H51, vehicle details, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.
