71505-TKM-H50 Bumper Trim Molding for HONDA Elysion 2022 Right
Primary OE reference: 71505-TKM-H50
Cross-reference number 1: 71505-TKM-H50
Cross-reference number 2: 71505TKMH50
Product: Bumper Trim Molding
Vehicle: HONDA Elysion 2022
Installation area: Rear
Side / orientation: Right
Surface detail: verify against the original part
Internal item code: HD02005-165
Fitment note: match the stated body style; review the end profiles; review facelift differences before ordering 71505-TKM-H50
Product comparison: review nearby cover openings; compare the original length; inspect narrow moulding ends against the removed bumper trim molding
Installation note: confirm the fitting direction; review separate hardware needs; confirm an even seated fit on the Elysion
Wholesale enquiry: state the required quantity; retain the product label; confirm the delivery schedule for HD02005-165
Application guidance: The stated application is HONDA Elysion 2022, with rear placement and right orientation. Also check nearby lamp openings, inspect the back-side structure, check adjacent panel gaps, and confirm sample requirements.
71505-TKM-H50 Bumper Trim Molding Product Overview
This application-led listing presents 71505-TKM-H50 as a bumper trim molding for HONDA Elysion 2022. Item HD02005-165 is intended for OE-number comparison rather than shape-only selection.
The stated application is HONDA Elysion 2022, with rear placement and right orientation. Also check nearby lamp openings, inspect the back-side structure, check adjacent panel gaps, and confirm sample requirements.
Fitment and Application for Elysion
For HONDA Elysion 2022, match the stated body style, inspect the original contour, and confirm the installation position. Before packing the confirmed item, check the vehicle build date, confirm the surface specification, and compare the mounting direction.
When preparing a Elysion exterior repair, confirm the installation position, confirm the surface specification, and confirm the production year. For a no-force trial fit, check nearby lamp openings, review the end profiles, and compare the complete OE number.
During comparison with the original bumper trim, confirm the surface specification, check adjacent garnish pieces, and match the original clip spacing. While checking adjacent body parts, compare the mounting direction, confirm the vehicle market, and compare the complete OE number.
Bumper Trim Molding Design and Replacement Notes
For the listed 2022 application, inspect the locator direction, check the panel transition, and review transferred hardware. During receiving inspection, compare visible edge height, inspect the locator direction, and check the panel transition.
Before the removed component is discarded, review the surface texture, review nearby cover openings, and review the centre alignment. Before the quotation is confirmed, review transferred hardware, examine the visible finish, and review the surface texture.
During an OE-led check for HD02005-165, inspect the back-side structure, compare visible edge height, and examine the visible finish. Before packing the confirmed item, check the moulding curvature, inspect the fastening slots, and compare gloss or plating.
For a direct comparison of 71505-TKM-H50, compare the removed trim, check the adjoining gap, inspect damaged mounting points, and confirm separate accessory needs. The bumper trim molding should match the original right rear profile before it is installed or released for shipment.
Installation Guidance
For HONDA Elysion 2022, align the centre first, check lamp-cover clearance, and review the completed alignment. While reviewing the supplied photographs, align the centre first, check lamp-cover clearance, and review the completed alignment.
When preparing a Elysion exterior repair, retain the removed component, inspect every screw point, and protect painted panel edges. Before final installation, check the final perimeter, review the completed alignment, and confirm the final trim gap.
During comparison with the original bumper trim, check the final perimeter, clean the mounting channel, and inspect damaged mounting points. During receiving inspection, retain the removed component, review separate hardware needs, and confirm the final trim gap.
Product Technical Specifications
| Product type | Bumper Trim Molding |
|---|---|
| Primary OE reference | 71505-TKM-H50 |
| Cross-reference numbers | 71505-TKM-H50 71505TKMH50 |
| Internal item code | HD02005-165 |
| Vehicle brand | HONDA |
| Vehicle model | Elysion |
| Model year | 2022 |
| Installation area | Rear |
| Side / orientation | Right |
| Surface detail | verify against the original part |
| Applicable vehicle | HONDA Elysion 2022 |
Wholesale Supply and Packing
For the listed 2022 application, inspect the receiving condition, retain the product label, and confirm sample requirements. At the workshop preparation stage, state the target application, review carton edge protection, and confirm separate accessory needs.
Before the removed component is discarded, compare the supplied photographs, confirm the packing method, and state the required quantity. For a repeat wholesale order, confirm the surface requirement, inspect the receiving condition, and review carton edge protection.
During an OE-led check for HD02005-165, confirm the delivery schedule, request supported carton packing, and review carton edge protection. While reviewing the supplied photographs, state the destination port, confirm the surface requirement, and state the target application.
Distributors sourcing 71505-TKM-H50 should keep HD02005-165 and the right position on every quotation revision. Sample confirmation, carton marking and repeat-order specification details should use the same part number chain.
Frequently Asked Questions
Does 71505-TKM-H50 have a fixed surface finish?
The source detail is verify against the original part. Colour, gloss, texture or plating should be verified against the original vehicle and an approved sample before production. For Elysion, check nearby lamp openings, inspect narrow moulding ends, protect painted panel edges, and confirm the surface requirement before installation or quotation.
Is a model name alone enough to order 71505-TKM-H50?
No. The Elysion name is useful for discovery, but OE number 71505-TKM-H50, VIN or build data, side, finish and physical attachment points should agree. For Elysion, confirm the surface specification, compare the original edge profile, transfer reusable clips carefully, and request protective inner packing before installation or quotation.
What should be inspected when 71505-TKM-H50 arrives?
Check the bumper trim molding part number, overall straightness, edge condition, attachment points and visible surface before installation or disposal of packaging. For Elysion, match the stated body style, review transferred hardware, inspect the surrounding guides, and state annual purchasing volume before installation or quotation.
What information is needed for a 71505-TKM-H50 quotation?
Send HONDA Elysion 2022 vehicle details, the complete OE number, original-part photos, required quantity and delivery destination for a product-specific review. For Elysion, review market-specific styling, check the moulding curvature, check lamp-cover clearance, and state the target application before installation or quotation.
How should 71505-TKM-H50 be packed for export?
Support the moulding length, shield projecting locators and prevent abrasion on the verify against the original part surface. Packaging confirmation is useful for repeat wholesale orders. For Elysion, match the original clip spacing, inspect the back-side structure, trial-fit without force, and protect projecting locators before installation or quotation.
Request a Quote
Send the complete OE reference 71505-TKM-H50, vehicle details, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.
