71112-T6D-901 Bumper Trim Molding for HONDA Odyssey 2019 Right
Primary OE reference: 71112-T6D-901
Cross-reference number 1: 71112-T6D-901
Cross-reference number 2: 71112T6D901
Product: Bumper Trim Molding
Vehicle: HONDA Odyssey 2019
Installation area: Front
Side / orientation: Right
Surface detail: verify against the original part
Internal item code: HD02005-142
Fitment note: compare the removed trim; compare every attachment point; match the original clip spacing before ordering 71112-T6D-901
Product comparison: compare gloss or plating; inspect narrow moulding ends; check the adjoining gap against the removed bumper trim molding
Installation note: retain the removed component; review the completed alignment; inspect damaged mounting points on the Odyssey
Wholesale enquiry: include the complete OE number; confirm the delivery schedule; request protective inner packing for HD02005-142
Application guidance: This bumper trim molding is intended for the right front position on Odyssey. Also confirm the vehicle market, compare gloss or plating, check adjacent panel gaps, and request protective inner packing.
71112-T6D-901 Bumper Trim Molding Product Overview
Prepared for wholesale and replacement-part enquiries, 71112-T6D-901 covers a bumper trim molding for HONDA Odyssey 2019. Item HD02005-142 belongs in the front installation zone and should be matched by OE number, shape and mounting points.
This bumper trim molding is intended for the right front position on Odyssey. Also confirm the vehicle market, compare gloss or plating, check adjacent panel gaps, and request protective inner packing.
Fitment and Application for Odyssey
Before sourcing this bumper trim molding for Odyssey, confirm the installation position, review market-specific styling, and match the bumper outline. At the workshop preparation stage, check the vehicle build date, compare the removed trim, and review the end profiles.
Before confirming this verify against the original part bumper trim molding, confirm the surface specification, confirm the vehicle market, and review facelift differences. For a repeat wholesale order, check nearby lamp openings, check the vehicle build date, and check adjacent garnish pieces.
For HONDA Odyssey 2019, confirm the production year, confirm the installation position, and check adjacent garnish pieces. While reviewing the supplied photographs, review facelift differences, match the bumper outline, and compare the mounting direction.
Bumper Trim Molding Design and Replacement Notes
When separating nearby Odyssey trim variants, review transferred hardware, check the bumper interface, and inspect the moulding width. During the physical comparison, compare the original edge profile, review the centre alignment, and check the panel transition.
When comparing 71112-T6D-901 with the removed part, inspect the moulding width, review the centre alignment, and inspect narrow moulding ends. When checking the visible exterior face, review nearby cover openings, inspect the locator direction, and review the surface texture.
For the listed 2019 application, review the centre alignment, compare the end termination, and inspect the fastening slots. At the workshop preparation stage, check the panel transition, review the surface texture, and compare gloss or plating.
For a direct comparison of 71112-T6D-901, inspect the original contour, review the surface texture, check lamp-cover clearance, and protect projecting locators. The bumper trim molding should match the original right front profile before it is installed or released for shipment.
Installation Guidance
Before sourcing this bumper trim molding for Odyssey, review the completed alignment, protect the visible surface, and check adjacent panel gaps. While checking adjacent body parts, inspect every screw point, confirm an even seated fit, and support the trim evenly.
Before confirming this verify against the original part bumper trim molding, trial-fit without force, check lamp-cover clearance, and inspect the surrounding guides. Before clips or hardware are transferred, transfer reusable clips carefully, protect painted panel edges, and support the trim evenly.
For HONDA Odyssey 2019, avoid bending long sections, inspect every screw point, and review separate hardware needs. During the physical comparison, review the completed alignment, clean the mounting channel, and trial-fit without force.
Product Technical Specifications
| Product type | Bumper Trim Molding |
|---|---|
| Primary OE reference | 71112-T6D-901 |
| Cross-reference numbers | 71112-T6D-901 71112T6D901 |
| Internal item code | HD02005-142 |
| Vehicle brand | HONDA |
| Vehicle model | Odyssey |
| Model year | 2019 |
| Installation area | Front |
| Side / orientation | Right |
| Surface detail | verify against the original part |
| Applicable vehicle | HONDA Odyssey 2019 |
Wholesale Supply and Packing
When separating nearby Odyssey trim variants, confirm the surface requirement, state the target application, and confirm the packing method. Before packing the confirmed item, include the complete OE number, confirm sample requirements, and request export quotation terms.
When comparing 71112-T6D-901 with the removed part, confirm sample requirements, review carton edge protection, and compare the supplied photographs. For a no-force trial fit, state annual purchasing volume, confirm the packing method, and confirm the delivery schedule.
For the listed 2019 application, state annual purchasing volume, request protective inner packing, and confirm the surface requirement. While checking adjacent body parts, retain the product label, compare the supplied photographs, and state the destination port.
A quotation request should state 71112-T6D-901, HD02005-142, HONDA Odyssey 2019, required quantity and destination. VIN data and original-part photographs allow the supplier to review the line before confirming commercial terms.
Frequently Asked Questions
What information is needed for a 71112-T6D-901 quotation?
Send HONDA Odyssey 2019 vehicle details, the complete OE number, original-part photos, required quantity and delivery destination for a product-specific review. For Odyssey, confirm the surface specification, examine the visible finish, avoid bending long sections, and protect projecting locators before installation or quotation.
How should 71112-T6D-901 be packed for export?
Support the moulding length, shield projecting locators and prevent abrasion on the verify against the original part surface. Packaging confirmation is useful for repeat wholesale orders. For Odyssey, match the stated body style, check the adjoining gap, support the trim evenly, and provide the delivery country before installation or quotation.
Which vehicle is 71112-T6D-901 listed for?
The source application is HONDA Odyssey 2019. VIN, production date, body style and market version should still be checked because exterior trim can change within one model line. For Odyssey, review market-specific styling, inspect the locator direction, protect painted panel edges, and confirm the packing method before installation or quotation.
Does 71112-T6D-901 have a fixed surface finish?
The source detail is verify against the original part. Colour, gloss, texture or plating should be verified against the original vehicle and an approved sample before production. For Odyssey, match the original clip spacing, compare the original length, transfer reusable clips carefully, and confirm separate accessory needs before installation or quotation.
Is a model name alone enough to order 71112-T6D-901?
No. The Odyssey name is useful for discovery, but OE number 71112-T6D-901, VIN or build data, side, finish and physical attachment points should agree. For Odyssey, verify the mounting side, review the centre alignment, inspect the surrounding guides, and inspect the receiving condition before installation or quotation.
Request a Quote
Send the complete OE reference 71112-T6D-901, vehicle details, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.
