71112-TLA-C50 Bumper Trim Molding for HONDA CR-V 2020
Primary OE reference: 71112-TLA-C50
Cross-reference number 1: 71112-TLA-C50
Cross-reference number 2: 71112TLAC50
Product: Bumper Trim Molding
Vehicle: HONDA CR-V 2020
Installation area: Front
Side / orientation: Unspecified
Surface detail: painted black
Internal item code: HD02005-078
Fitment note: review facelift differences; confirm the vehicle market; match the bumper outline before ordering 71112-TLA-C50
Product comparison: inspect the locator direction; check the panel transition; review transferred hardware against the removed bumper trim molding
Installation note: check adjacent panel gaps; clean the mounting channel; protect painted panel edges on the CR-V
Wholesale enquiry: protect projecting locators; retain the product label; state the required quantity for HD02005-078
Application guidance: 71112-TLA-C50 is listed for HONDA CR-V 2020; begin with the unspecified front profile. Also match the bumper outline, review the centre alignment, check adjacent panel gaps, and confirm sample requirements.
71112-TLA-C50 Bumper Trim Molding Product Overview
The subject is a bumper trim molding catalogued as 71112-TLA-C50 for HONDA CR-V 2020. Item HD02005-078 uses the stated painted black surface detail, which should be compared with the removed component before shipment.
71112-TLA-C50 is listed for HONDA CR-V 2020; begin with the unspecified front profile. Also match the bumper outline, review the centre alignment, check adjacent panel gaps, and confirm sample requirements.
Fitment and Application for CR-V
During an OE-led check for HD02005-078, confirm the surface specification, match the stated body style, and review market-specific styling. Before packing the confirmed item, match the original clip spacing, verify the mounting side, and check the vehicle build date.
For wholesale selection of 71112-TLA-C50, confirm the production year, review facelift differences, and inspect the original contour. For a no-force trial fit, check nearby lamp openings, review market-specific styling, and check the vehicle build date.
Before sourcing this bumper trim molding for CR-V, check nearby lamp openings, compare the removed trim, and compare the mounting direction. While checking adjacent body parts, review facelift differences, confirm the installation position, and review the end profiles.
Bumper Trim Molding Design and Replacement Notes
During comparison with the original bumper trim, inspect the locator direction, check the moulding curvature, and review the centre alignment. During receiving inspection, compare the end termination, inspect the fastening slots, and check the panel transition.
For a replacement on the unspecified front area, review the surface texture, review transferred hardware, and review nearby cover openings. Before the quotation is confirmed, examine the visible finish, review the centre alignment, and review the surface texture.
When separating nearby CR-V trim variants, inspect the back-side structure, compare the original edge profile, and review the surface texture. Before packing the confirmed item, check the bumper interface, inspect the locator direction, and compare gloss or plating.
For a direct comparison of 71112-TLA-C50, compare the mounting direction, compare the end termination, confirm an even seated fit, and request protective inner packing. The bumper trim molding should match the original unspecified front profile before it is installed or released for shipment.
Installation Guidance
During an OE-led check for HD02005-078, check lamp-cover clearance, protect painted panel edges, and confirm an even seated fit. While reviewing the supplied photographs, confirm the final trim gap, protect the visible surface, and inspect damaged mounting points.
For wholesale selection of 71112-TLA-C50, confirm an even seated fit, protect the visible surface, and confirm locator engagement. Before final installation, protect painted panel edges, confirm the final trim gap, and inspect damaged mounting points.
Before sourcing this bumper trim molding for CR-V, protect the visible surface, trial-fit without force, and align the centre first. During receiving inspection, inspect damaged mounting points, transfer reusable clips carefully, and check adjacent panel gaps.
Product Technical Specifications
| Product type | Bumper Trim Molding |
|---|---|
| Primary OE reference | 71112-TLA-C50 |
| Cross-reference numbers | 71112-TLA-C50 71112TLAC50 |
| Internal item code | HD02005-078 |
| Vehicle brand | HONDA |
| Vehicle model | CR-V |
| Model year | 2020 |
| Installation area | Front |
| Side / orientation | Unspecified |
| Surface detail | painted black |
| Applicable vehicle | HONDA CR-V 2020 |
Wholesale Supply and Packing
During comparison with the original bumper trim, state the required quantity, request supported carton packing, and confirm sample requirements. At the workshop preparation stage, check the ordered mounting side, confirm the delivery schedule, and include the complete OE number.
For a replacement on the unspecified front area, protect projecting locators, compare the supplied photographs, and state the required quantity. For a repeat wholesale order, inspect the receiving condition, state annual purchasing volume, and send original-part photographs.
When separating nearby CR-V trim variants, review carton edge protection, check the ordered mounting side, and confirm the packing method. While reviewing the supplied photographs, request protective inner packing, send original-part photographs, and request supported carton packing.
A structured enquiry for HD02005-078 includes 71112-TLA-C50, CR-V vehicle vehicle details, target price basis, packing method and destination. This reduces follow-up and keeps the technical selection visible to purchasing staff.
Frequently Asked Questions
Does 71112-TLA-C50 have a fixed surface finish?
The source detail is painted black. Colour, gloss, texture or plating should be verified against the original vehicle and an approved sample before production. For CR-V, match the stated body style, inspect narrow moulding ends, align the centre first, and inspect the receiving condition before installation or quotation.
Is a model name alone enough to order 71112-TLA-C50?
No. The CR-V name is useful for discovery, but OE number 71112-TLA-C50, VIN or build data, side, finish and physical attachment points should agree. For CR-V, review market-specific styling, compare the original edge profile, confirm an even seated fit, and include the complete OE number before installation or quotation.
What should be inspected when 71112-TLA-C50 arrives?
Check the bumper trim molding part number, overall straightness, edge condition, attachment points and visible surface before installation or disposal of packaging. For CR-V, match the original clip spacing, review transferred hardware, avoid bending long sections, and confirm the delivery schedule before installation or quotation.
What information is needed for a 71112-TLA-C50 quotation?
Send HONDA CR-V 2020 vehicle details, the complete OE number, original-part photos, required quantity and delivery destination for a product-specific review. For CR-V, verify the mounting side, check the moulding curvature, support the trim evenly, and check the ordered mounting side before installation or quotation.
How should 71112-TLA-C50 be packed for export?
Support the moulding length, shield projecting locators and prevent abrasion on the painted black surface. Packaging confirmation is useful for repeat wholesale orders. For CR-V, check the vehicle build date, inspect the back-side structure, protect painted panel edges, and confirm sample requirements before installation or quotation.
Request a Quote
Send the complete OE reference 71112-TLA-C50, vehicle details, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.
