71112-TLA-A50 Bumper Trim Molding for HONDA CR-V 2020

71112-TLA-A50 Bumper Trim Molding Product Overview

For exterior line HD02005-081, the principal OE reference is 71112-TLA-A50. It is listed for HONDA CR-V 2020 (standard-spec version) and should be approved from the number, vehicle data and front mounting geometry together.

A correct HD02005-081 selection should follow the original contour, finish and clip direction. Also verify the mounting side, inspect the back-side structure, protect painted panel edges, and confirm sample requirements.

Fitment and Application for CR-V

For a replacement on the unspecified front area, check nearby lamp openings, review the end profiles, and compare the complete OE number. Before clips or hardware are transferred, compare every attachment point, compare the removed trim, and confirm the vehicle market.

When separating nearby CR-V trim variants, review the end profiles, confirm the surface specification, and check adjacent garnish pieces. During the physical comparison, match the original clip spacing, compare the mounting direction, and confirm the vehicle market.

When comparing 71112-TLA-A50 with the removed part, compare the complete OE number, verify the mounting side, and confirm the installation position. When checking the visible exterior face, compare the removed trim, match the original clip spacing, and confirm the production year.

Bumper Trim Molding Design and Replacement Notes

For wholesale selection of 71112-TLA-A50, check the bumper interface, check the moulding curvature, and check the adjoining gap. For a no-force trial fit, review the outer-edge shape, check the panel transition, and check the bumper interface.

Before sourcing this bumper trim molding for CR-V, compare the original edge profile, review the centre alignment, and check the panel transition. While checking adjacent body parts, inspect narrow moulding ends, compare the original length, and review nearby cover openings.

Before confirming this silver-grey bumper trim molding, check the panel transition, compare the original length, and review the outer-edge shape. Before clips or hardware are transferred, compare the end termination, check the adjoining gap, and compare visible edge height.

For a direct comparison of 71112-TLA-A50, check nearby lamp openings, check the adjoining gap, check the final perimeter, and request export quotation terms. The bumper trim molding should match the original unspecified front profile before it is installed or released for shipment.

Installation Guidance

For a replacement on the unspecified front area, align the centre first, transfer reusable clips carefully, and confirm locator engagement. Before the quotation is confirmed, retain the removed component, inspect every screw point, and protect painted panel edges.

When separating nearby CR-V trim variants, retain the removed component, review separate hardware needs, and confirm the final trim gap. Before packing the confirmed item, align the centre first, avoid bending long sections, and protect painted panel edges.

When comparing 71112-TLA-A50 with the removed part, check the final perimeter, trial-fit without force, and check lamp-cover clearance. For a no-force trial fit, inspect the surrounding guides, transfer reusable clips carefully, and protect painted panel edges.

Product Technical Specifications

Wholesale Supply and Packing

For wholesale selection of 71112-TLA-A50, check the ordered mounting side, state the destination port, and provide the delivery country. Before final installation, request supported carton packing, retain the product label, and confirm separate accessory needs.

Before sourcing this bumper trim molding for CR-V, request protective inner packing, protect projecting locators, and confirm separate accessory needs. During receiving inspection, confirm the delivery schedule, request supported carton packing, and review carton edge protection.

Before confirming this silver-grey bumper trim molding, request supported carton packing, support the moulding length, and retain the product label. Before the quotation is confirmed, state the target application, confirm separate accessory needs, and check the ordered mounting side.

For repeat purchasing of 71112-TLA-A50, retain the approved CR-V sample under supplier code HD02005-081. specification details revision dates whenever the vehicle application, finish or packaging specification changes.

Frequently Asked Questions

What product does OE 71112-TLA-A50 identify?

71112-TLA-A50 is listed here as a bumper trim molding. It is not presented as a complete bumper assembly, and the buyer should compare the original component before ordering. For CR-V, match the original clip spacing, check the moulding curvature, protect painted panel edges, and request export quotation terms before installation or quotation.

How should the position of 71112-TLA-A50 be confirmed?

This listing specification details a unspecified component for the front area. Compare the removed part, mounting direction and termination points before confirmation. For CR-V, verify the mounting side, inspect the back-side structure, transfer reusable clips carefully, and review carton edge protection before installation or quotation.

Why should supplier code HD02005-081 stay on the enquiry?

HD02005-081 connects the 71112-TLA-A50 fitment review, quotation, sample and receiving specification details. Keeping it on every revision reduces the risk of mixing similar trim pieces. For CR-V, check the vehicle build date, compare the end termination, inspect the surrounding guides, and support the moulding length before installation or quotation.

Can a photo alone verify 71112-TLA-A50?

A photograph helps compare outline and finish, but it cannot replace the OE number or vehicle vehicle details. Review 71112-TLA-A50 and HD02005-081 with the removed part dimensions. For CR-V, confirm the vehicle market, review nearby cover openings, check lamp-cover clearance, and send original-part photographs before installation or quotation.

Is professional installation recommended for 71112-TLA-A50?

Yes. A workshop can dry-fit HD02005-081, correct damaged mounting areas and avoid forcing clips into a mismatched body panel. For CR-V, compare every attachment point, check the panel transition, trial-fit without force, and state the destination port before installation or quotation.

Request a Quote

Send the complete OE reference 71112-TLA-A50, vehicle details, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.