71108-3F0-H10 Bumper Trim Molding for HONDA Breeze 2023 Left
Primary OE reference: 71108-3F0-H10
Cross-reference number 1: 71108-3F0-H10
Cross-reference number 2: 711083F0H10
Product: Bumper Trim Molding
Vehicle: HONDA Breeze 2023
Installation area: Front
Side / orientation: Left
Surface detail: textured
Internal item code: HD02005-102
Fitment note: confirm the surface specification; match the original clip spacing; check the vehicle build date before ordering 71108-3F0-H10
Product comparison: inspect the moulding width; check the adjoining gap; review the centre alignment against the removed bumper trim molding
Installation note: avoid bending long sections; inspect every screw point; review separate hardware needs on the Breeze
Wholesale enquiry: state annual purchasing volume; retain the product label; confirm the packing method for HD02005-102
Application guidance: Selection for Breeze should combine OE 71108-3F0-H10, body version and attachment geometry. Also inspect the original contour, review the centre alignment, protect painted panel edges, and confirm sample requirements.
71108-3F0-H10 Bumper Trim Molding Product Overview
HONDA Breeze 2023 buyers can begin identification with 71108-3F0-H10. This bumper trim molding is registered under HD02005-102, with left orientation retained for quotation, sample review and receiving control.
Selection for Breeze should combine OE 71108-3F0-H10, body version and attachment geometry. Also inspect the original contour, review the centre alignment, protect painted panel edges, and confirm sample requirements.
Fitment and Application for Breeze
For wholesale selection of 71108-3F0-H10, review facelift differences, check the vehicle build date, and compare the complete OE number. Before final installation, confirm the installation position, match the original clip spacing, and inspect the original contour.
Before sourcing this bumper trim molding for Breeze, review market-specific styling, compare the removed trim, and check adjacent garnish pieces. During receiving inspection, confirm the vehicle market, match the stated body style, and inspect the original contour.
Before confirming this textured bumper trim molding, check adjacent garnish pieces, match the stated body style, and confirm the installation position. Before the quotation is confirmed, confirm the surface specification, confirm the production year, and check nearby lamp openings.
Bumper Trim Molding Design and Replacement Notes
For a replacement on the left front area, compare the original length, check the bumper interface, and compare visible edge height. For a repeat wholesale order, review the outer-edge shape, compare the original edge profile, and check the moulding curvature.
When separating nearby Breeze trim variants, review the outer-edge shape, review the centre alignment, and compare gloss or plating. While reviewing the supplied photographs, inspect the back-side structure, review the outer-edge shape, and review the centre alignment.
When comparing 71108-3F0-H10 with the removed part, compare the end termination, compare the original length, and compare the original edge profile. Before final installation, compare gloss or plating, compare visible edge height, and compare the end termination.
For a direct comparison of 71108-3F0-H10, check adjacent garnish pieces, compare gloss or plating, confirm the fitting direction, and request supported carton packing. The bumper trim molding should match the original left front profile before it is installed or released for shipment.
Installation Guidance
For wholesale selection of 71108-3F0-H10, align the centre first, confirm locator engagement, and inspect every screw point. When checking the visible exterior face, check the final perimeter, confirm the final trim gap, and trial-fit without force.
Before sourcing this bumper trim molding for Breeze, retain the removed component, confirm an even seated fit, and trial-fit without force. At the workshop preparation stage, retain the removed component, confirm an even seated fit, and trial-fit without force.
Before confirming this textured bumper trim molding, check the final perimeter, review the completed alignment, and confirm the final trim gap. For a repeat wholesale order, support the trim evenly, trial-fit without force, and inspect damaged mounting points.
Product Technical Specifications
| Product type | Bumper Trim Molding |
|---|---|
| Primary OE reference | 71108-3F0-H10 |
| Cross-reference numbers | 71108-3F0-H10 711083F0H10 |
| Internal item code | HD02005-102 |
| Vehicle brand | HONDA |
| Vehicle model | Breeze |
| Model year | 2023 |
| Installation area | Front |
| Side / orientation | Left |
| Surface detail | textured |
| Applicable vehicle | HONDA Breeze 2023 |
Wholesale Supply and Packing
For a replacement on the left front area, request export quotation terms, provide the delivery country, and support the moulding length. Before clips or hardware are transferred, confirm separate accessory needs, state the destination port, and include the complete OE number.
When separating nearby Breeze trim variants, provide the delivery country, send original-part photographs, and include the complete OE number. During the physical comparison, confirm the surface requirement, request supported carton packing, and protect projecting locators.
When comparing 71108-3F0-H10 with the removed part, support the moulding length, state the target application, and check the ordered mounting side. When checking the visible exterior face, state the destination port, provide the delivery country, and request supported carton packing.
Order review for 71108-3F0-H10 should connect supplier code HD02005-102 with the front application, buyer-approved photos and logistics instructions. Keep the same identifiers on samples and shipping paperwork.
Frequently Asked Questions
Can a photo alone verify 71108-3F0-H10?
A photograph helps compare outline and finish, but it cannot replace the OE number or vehicle vehicle details. Review 71108-3F0-H10 and HD02005-102 with the removed part dimensions. For Breeze, inspect the original contour, compare the original edge profile, check lamp-cover clearance, and request supported carton packing before installation or quotation.
Is professional installation recommended for 71108-3F0-H10?
Yes. A workshop can dry-fit HD02005-102, correct damaged mounting areas and avoid forcing clips into a mismatched body panel. For Breeze, compare the removed trim, review transferred hardware, trial-fit without force, and state the required quantity before installation or quotation.
Can the opposite-side trim replace 71108-3F0-H10?
Normally no. The listing specification details the left orientation, and opposite-side curvature or fastener direction may differ even when the finish appears identical. For Breeze, compare the complete OE number, check the moulding curvature, check the final perimeter, and request export quotation terms before installation or quotation.
What product does OE 71108-3F0-H10 identify?
71108-3F0-H10 is listed here as a bumper trim molding. It is not presented as a complete bumper assembly, and the buyer should compare the original component before ordering. For Breeze, check nearby lamp openings, inspect the back-side structure, confirm locator engagement, and review carton edge protection before installation or quotation.
How should the position of 71108-3F0-H10 be confirmed?
This listing specification details a left component for the front area. Compare the removed part, mounting direction and termination points before confirmation. For Breeze, confirm the surface specification, compare the end termination, clean the mounting channel, and support the moulding length before installation or quotation.
Request a Quote
Send the complete OE reference 71108-3F0-H10, vehicle details, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.
