04717-TLY-H00ZZ Bumper Corner Trim for HONDA CR-V 2017 Left
Primary OE reference: 04717-TLY-H00ZZ
Cross-reference number 1: 04717-TLY-H00ZZ
Cross-reference number 2: 04717TLYH00ZZ
Product: Bumper Corner Trim
Vehicle: HONDA CR-V 2017
Installation area: Rear
Side / orientation: Left
Surface detail: verify against the original part
Internal item code: HD02005-075
Fitment note: confirm the installation position; inspect the original contour; check nearby lamp openings before ordering 04717-TLY-H00ZZ
Product comparison: examine the visible finish; compare gloss or plating; inspect the moulding width against the removed bumper corner trim
Installation note: clean the mounting channel; clean the mounting channel; clean the mounting channel on the CR-V
Wholesale enquiry: confirm the packing method; retain the product label; confirm the surface requirement for HD02005-075
Application guidance: A correct HD02005-075 selection should follow the original contour, finish and clip direction. Also compare every attachment point, inspect the back-side structure, protect painted panel edges, and confirm sample requirements.
04717-TLY-H00ZZ Bumper Corner Trim Product Overview
Prepared for wholesale and replacement-part enquiries, 04717-TLY-H00ZZ covers a bumper corner trim for HONDA CR-V 2017. Item HD02005-075 belongs in the rear installation zone and should be matched by OE number, shape and mounting points.
A correct HD02005-075 selection should follow the original contour, finish and clip direction. Also compare every attachment point, inspect the back-side structure, protect painted panel edges, and confirm sample requirements.
Fitment and Application for CR-V
Before sourcing this bumper corner trim for CR-V, check the vehicle build date, compare the removed trim, and review the end profiles. At the workshop preparation stage, confirm the surface specification, check adjacent garnish pieces, and match the original clip spacing.
Before confirming this verify against the original part bumper corner trim, compare the mounting direction, match the stated body style, and compare every attachment point. For a repeat wholesale order, match the bumper outline, confirm the surface specification, and confirm the vehicle market.
For HONDA CR-V 2017, verify the mounting side, check the vehicle build date, and confirm the vehicle market. While reviewing the supplied photographs, compare every attachment point, review the end profiles, and confirm the production year.
Bumper Corner Trim Design and Replacement Notes
When separating nearby CR-V trim variants, review the centre alignment, check the panel transition, and inspect narrow moulding ends. During the physical comparison, compare the original length, review nearby cover openings, and review the outer-edge shape.
When comparing 04717-TLY-H00ZZ with the removed part, inspect narrow moulding ends, review nearby cover openings, and inspect the locator direction. When checking the visible exterior face, review the surface texture, inspect the back-side structure, and examine the visible finish.
For the listed 2017 application, review nearby cover openings, compare visible edge height, and inspect the moulding width. At the workshop preparation stage, review the outer-edge shape, examine the visible finish, and compare the original edge profile.
For a direct comparison of 04717-TLY-H00ZZ, verify the mounting side, check the panel transition, retain the removed component, and check the ordered mounting side. The bumper corner trim should match the original left rear profile before it is installed or released for shipment.
Installation Guidance
Before sourcing this bumper corner trim for CR-V, review the completed alignment, protect the visible surface, and check adjacent panel gaps. While checking adjacent body parts, inspect every screw point, confirm an even seated fit, and support the trim evenly.
Before confirming this verify against the original part bumper corner trim, trial-fit without force, check lamp-cover clearance, and inspect the surrounding guides. Before clips or hardware are transferred, transfer reusable clips carefully, protect painted panel edges, and support the trim evenly.
For HONDA CR-V 2017, avoid bending long sections, inspect every screw point, and review separate hardware needs. During the physical comparison, review the completed alignment, clean the mounting channel, and trial-fit without force.
Product Technical Specifications
| Product type | Bumper Corner Trim |
|---|---|
| Primary OE reference | 04717-TLY-H00ZZ |
| Cross-reference numbers | 04717-TLY-H00ZZ 04717TLYH00ZZ |
| Internal item code | HD02005-075 |
| Vehicle brand | HONDA |
| Vehicle model | CR-V |
| Model year | 2017 |
| Installation area | Rear |
| Side / orientation | Left |
| Surface detail | verify against the original part |
| Applicable vehicle | HONDA CR-V 2017 |
Wholesale Supply and Packing
When separating nearby CR-V trim variants, review carton edge protection, state the destination port, and confirm the surface requirement. Before packing the confirmed item, state the target application, confirm the packing method, and include the complete OE number.
When comparing 04717-TLY-H00ZZ with the removed part, confirm the packing method, confirm the delivery schedule, and state the required quantity. For a no-force trial fit, send original-part photographs, confirm the surface requirement, and protect projecting locators.
For the listed 2017 application, send original-part photographs, support the moulding length, and review carton edge protection. While checking adjacent body parts, request export quotation terms, state the required quantity, and request supported carton packing.
A quotation request should state 04717-TLY-H00ZZ, HD02005-075, HONDA CR-V 2017, required quantity and destination. VIN data and original-part photographs allow the supplier to review the line before confirming commercial terms.
Frequently Asked Questions
What information is needed for a 04717-TLY-H00ZZ quotation?
Send HONDA CR-V 2017 vehicle details, the complete OE number, original-part photos, required quantity and delivery destination for a product-specific review. For CR-V, confirm the installation position, review transferred hardware, review the completed alignment, and send original-part photographs before installation or quotation.
How should 04717-TLY-H00ZZ be packed for export?
Support the moulding length, shield projecting locators and prevent abrasion on the verify against the original part surface. Packaging confirmation is useful for repeat wholesale orders. For CR-V, check adjacent garnish pieces, check the moulding curvature, retain the removed component, and state the destination port before installation or quotation.
Which vehicle is 04717-TLY-H00ZZ listed for?
The source application is HONDA CR-V 2017. VIN, production date, body style and market version should still be checked because exterior trim can change within one model line. For CR-V, review facelift differences, inspect the back-side structure, protect the visible surface, and compare the supplied photographs before installation or quotation.
Does 04717-TLY-H00ZZ have a fixed surface finish?
The source detail is verify against the original part. Colour, gloss, texture or plating should be verified against the original vehicle and an approved sample before production. For CR-V, match the bumper outline, compare the end termination, review separate hardware needs, and retain the product label before installation or quotation.
Is a model name alone enough to order 04717-TLY-H00ZZ?
No. The CR-V name is useful for discovery, but OE number 04717-TLY-H00ZZ, VIN or build data, side, finish and physical attachment points should agree. For CR-V, compare the mounting direction, review nearby cover openings, check adjacent panel gaps, and confirm the surface requirement before installation or quotation.
Request a Quote
Send the complete OE reference 04717-TLY-H00ZZ, vehicle details, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.
