71514-TME-T00 Bumper Trim Molding for HONDA CR-V 2017 Right
Primary OE reference: 71514-TME-T00
Cross-reference number 1: 71514-TME-T00
Cross-reference number 2: 71514TMET00
Product: Bumper Trim Molding
Vehicle: HONDA CR-V 2017 (high-spec version)
Installation area: Rear
Side / orientation: Right
Surface detail: verify against the original part
Internal item code: HD02005-072
Fitment note: inspect the original contour; review market-specific styling; inspect the original contour before ordering 71514-TME-T00
Product comparison: check the adjoining gap; review the surface texture; compare the end termination against the removed bumper trim molding
Installation note: transfer reusable clips carefully; review separate hardware needs; trial-fit without force on the CR-V
Wholesale enquiry: state the destination port; confirm the delivery schedule; state the destination port for HD02005-072
Application guidance: Use 71514-TME-T00 as the main lookup reference for this CR-V exterior component. Also match the original clip spacing, review the outer-edge shape, protect painted panel edges, and request protective inner packing.
71514-TME-T00 Bumper Trim Molding Product Overview
OE number 71514-TME-T00 is the primary lookup key for this bumper trim molding listed for HONDA CR-V 2017 (high-spec version). The 2017 specification and supplier code HD02005-072 help distinguish it from neighbouring facelift or market variants.
Use 71514-TME-T00 as the main lookup reference for this CR-V exterior component. Also match the original clip spacing, review the outer-edge shape, protect painted panel edges, and request protective inner packing.
Fitment and Application for CR-V
Before the removed component is discarded, review market-specific styling, check adjacent garnish pieces, and match the stated body style. Before clips or hardware are transferred, confirm the installation position, confirm the surface specification, and confirm the production year.
During an OE-led check for HD02005-072, check adjacent garnish pieces, match the original clip spacing, and compare the mounting direction. During the physical comparison, confirm the vehicle market, compare the complete OE number, and confirm the production year.
For wholesale selection of 71514-TME-T00, match the stated body style, compare every attachment point, and match the bumper outline. When checking the visible exterior face, confirm the surface specification, confirm the vehicle market, and review facelift differences.
Bumper Trim Molding Design and Replacement Notes
When preparing a CR-V exterior repair, check the moulding curvature, check the adjoining gap, and review the outer-edge shape. For a no-force trial fit, check the panel transition, check the bumper interface, and check the moulding curvature.
During comparison with the original bumper trim, compare gloss or plating, review transferred hardware, and check the bumper interface. While checking adjacent body parts, inspect the moulding width, compare the original edge profile, and review the centre alignment.
For a replacement on the right rear area, check the bumper interface, compare the original edge profile, and check the panel transition. Before clips or hardware are transferred, compare the original length, review the outer-edge shape, and compare the end termination.
For a direct comparison of 71514-TME-T00, confirm the installation position, inspect the fastening slots, inspect the surrounding guides, and confirm the delivery schedule. The bumper trim molding should match the original right rear profile before it is installed or released for shipment.
Installation Guidance
Before the removed component is discarded, review the completed alignment, confirm the final trim gap, and support the trim evenly. Before the quotation is confirmed, trial-fit without force, inspect damaged mounting points, and check adjacent panel gaps.
During an OE-led check for HD02005-072, trial-fit without force, confirm locator engagement, and confirm the fitting direction. Before packing the confirmed item, review the completed alignment, protect the visible surface, and check adjacent panel gaps.
For wholesale selection of 71514-TME-T00, avoid bending long sections, confirm an even seated fit, and align the centre first. For a no-force trial fit, inspect every screw point, confirm the final trim gap, and check adjacent panel gaps.
Product Technical Specifications
| Product type | Bumper Trim Molding |
|---|---|
| Primary OE reference | 71514-TME-T00 |
| Cross-reference numbers | 71514-TME-T00 71514TMET00 |
| Internal item code | HD02005-072 |
| Vehicle brand | HONDA |
| Vehicle model | CR-V |
| Model year | 2017 |
| Installation area | Rear |
| Side / orientation | Right |
| Surface detail | verify against the original part |
| Applicable vehicle | HONDA CR-V 2017 (high-spec version) |
Wholesale Supply and Packing
When preparing a CR-V exterior repair, confirm separate accessory needs, request export quotation terms, and request protective inner packing. Before final installation, include the complete OE number, support the moulding length, and state the target application.
During comparison with the original bumper trim, state the destination port, confirm the surface requirement, and state the target application. During receiving inspection, confirm the packing method, include the complete OE number, and confirm sample requirements.
For a replacement on the right rear area, include the complete OE number, request supported carton packing, and support the moulding length. Before the quotation is confirmed, retain the product label, state the target application, and confirm separate accessory needs.
For 71514-TME-T00, align finish acceptance, quantity, delivery schedule and carton protection under item HD02005-072. The verify against the original part surface should be documented before a production lot is released.
Frequently Asked Questions
What product does OE 71514-TME-T00 identify?
71514-TME-T00 is listed here as a bumper trim molding. It is not presented as a complete bumper assembly, and the buyer should compare the original component before ordering. For CR-V, compare the removed trim, check the adjoining gap, transfer reusable clips carefully, and support the moulding length before installation or quotation.
How should the position of 71514-TME-T00 be confirmed?
This listing specification details a right component for the rear area. Compare the removed part, mounting direction and termination points before confirmation. For CR-V, compare the complete OE number, inspect the locator direction, inspect the surrounding guides, and send original-part photographs before installation or quotation.
Why should supplier code HD02005-072 stay on the enquiry?
HD02005-072 connects the 71514-TME-T00 fitment review, quotation, sample and receiving specification details. Keeping it on every revision reduces the risk of mixing similar trim pieces. For CR-V, check nearby lamp openings, compare the original length, check lamp-cover clearance, and state the destination port before installation or quotation.
Can a photo alone verify 71514-TME-T00?
A photograph helps compare outline and finish, but it cannot replace the OE number or vehicle vehicle details. Review 71514-TME-T00 and HD02005-072 with the removed part dimensions. For CR-V, confirm the surface specification, review the centre alignment, trial-fit without force, and compare the supplied photographs before installation or quotation.
Is professional installation recommended for 71514-TME-T00?
Yes. A workshop can dry-fit HD02005-072, correct damaged mounting areas and avoid forcing clips into a mismatched body panel. For CR-V, match the stated body style, check the bumper interface, check the final perimeter, and retain the product label before installation or quotation.
Request a Quote
Send the complete OE reference 71514-TME-T00, vehicle details, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.
